JESIMAIK R16 Motorcycle Helmet Headset Instruction Manual
- July 20, 2024
- JESIMAIK
Table of Contents
JESIMAIK R16 Motorcycle Helmet Headset
Button Functions
Product Function Introduction
Power ON
Long press the button for 2 seconds
Power OFF
Long press the button for 2 seconds
Intercom Button Function
R16 one-click matching (Only applicable to this type of device, up to 8 device intercom)
- Power ON
- Multi-R16 device long presses the intercom and Enters the intercom machine pairing state (greener light flash).
- Click on any device intercom button, and multiple devices Will be automatically paired.
- When the pairing is successful, it will automatically Enter the state of speech (blue, greener lights slowly).
After using the device, click the intercom button, and all the devices will be connected automatically. When the intercom mode, double-click the intercom button to exit the intercom about the model.
Demonstrate
Compatible Pairing Function
- Power ON.
- Long – press the intercom button, Enter the intercom machine pairing status
- Double-click the R16 intercom. Search for pairing.
- When the pairing is successful, It will automatically enter the pairing mode. After use, click the intercom button to enter Intercom mode, Double -click the conversation button to exit Intercom mode
Notification of remaining battery
- Turn on the product
- Long press on the phone button and volume down button
When the device is mixed with each other’s intercom and music, one of the equipment answers the phone, The remaining three devices can talk normally. The microphone is closed, and you can hear the conversation sound at the same time when answering the phone. Your own call will not be passed through the intercom, and it will automatically return to normal after hanging up the phone. In cycling, if there is a device beyond the distance, After it returns to the normal distance, It will automatically connect to the intercom. (In a short time)
Music sharing
Music sharing link establishment: In the power-on state, press and hold the
phone button + volume up button of the two devices at the same time for 3
seconds, until the red and blue lights flash, the two devices are
automatically paired, and the music is automatically shared to the other
device after the pairing is successful. Music sharing enable/disable: After
the music sharing links of the two devices are successfully established,
double-click the volume up button + volume down button while playing music to
disable or enable music sharing to the other device.
Switch language
In the power-on state, press and hold the phone key + intercom key at the same
time, and then double-click the volume-up key.
There are two mounting options to choose from. Choose according to your helmet. When using the stick-on mounting, please clean the surface of your helmet.
FCC Warning Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements.