NEXIGO LT20 Multicolor Night Light User Manual
- June 3, 2024
- NEXIGO
Table of Contents
LT20 Multicolor Night Light
User Manual
LT20 Multicolor Night Light
Welcome to the NexiGo Family!
Thank you for choosing the NexiGo Multicolor Night Light! You are now port of
an exclusive club: the NexiGo Family! It’s our job to make sure you enjoy your
membership. If you have any problems please contact us at
cs@nexigo.com at any time for further assistance. This
product is covered by our industry leading 1-year manufacturers warranty. Make
sure to register your purchase at
nexigo.com/warranty for a FREE additional 1-year
warranty!
From all of us here at NexiGo. we want to welcome you again to the family. We
thank you deeply for your trust and for your business. We know you’ll love it
here. We look forward to serving you again in the near future.
Yours Sincerely. The NexiGo Team
Register to get EXTRA ONE year warranty.
Only valid in registering within 14 days of product delivery.
nexigo.com/warranty
Features:
- Stepless touch dimming
- One touch night light mode
- 5 types of white light
- 30/60 minutes autotimer
- Ultra-long standby time
- With light memory function
- 8 types of colored light & automatic color change
What’s in the Box?
- I xNexiGo Multicolor Night Light
- 1 xUSB Type-C Charging Cable
- 1 xUser Manual
Product Diagram:
Specifications:
| Product Name | NexiGo Multicolor Night Light |
|---|---|
| Model | LT20 |
| Power Consumption | 2.5W |
| Power Input | DC5V/lA |
| Color Temperature | 2200K-6500K/Eight Colors |
| Battery Capacity | 2500mAh |
| Charging Time | 51-Irs |
| Working Time | 6Hrs (Brightest light)-100Hrs (Lowest light) |
| Auto-off Timer | 30/60 Minutes |
Usage Instructions:
Power On/Off:
Power On: Touch and hold the Power Button on the bottom of the unit for 1.5
seconds to turn on the light. The White Light, RGB Light, and Timer buttons on
the top panel will light up when the light is powered on. Double tap the Touch
Ring to turn on/off the light when it is powered on.
Power Off:
Press and hold the Power Button for 1.5 seconds to power the light off.
White Light Mode:
Light Switch: Press the White Light button to switch among the five white
light temperatures: 2200K/3000K /4000K/5000K/6500K.
RGB Light Mode:
Light Switch: Touch the RGB Light button to switch among nine colored
light modes: red, oronge, yellow, green, cyan, blue, purple, pink, and a mode
that slowly switches among colors while providing a soothing “breathing”
effect.
Night Light Mode:
Turn On: First, double tap the Touch Ring to turn the light off. When the
light is off but powered on, press and hold the Touch Ring to turn on the
night light.
Turn Off: Double tap the Touch Ring to turn off the night light.
Dimming:
All Modes: Press and hold the Touch Ring to adjust the brightness. When you
press and hold the Touch Ring, the light will alternate between increasing
brightness or dimming. Once it reaches maximum brightness or minimum dimness
it will remain at that setting. Pressing and holding the Touch Ring again will
cause it to reverse.
Note: The Indicator Light will flash green twice when the brightness
reaches the maximum or minimum level.
Timer:
Activate Timer:
Touch the Timer button to set a 30 or 60 minutes timer. This will cause either
the 30 or the 60 to light up. respectively.
Cancel Auto-timer:
Touch the Timer button again to deactivate the timer.
Light Memory Function:
The light will retain brightness and color settings between uses. Low Battery
Alert: The Indicator Light will slowly flash red when the battery is below
20%. Please charge the light by connecting it to o power source (Laptop.
computer. etc. / Output: OCSU/ IA) using the provided USB Type-C charging
cable.
Type-C USB Charging:
The Indicator Light will flash red while the light is charging. It will turn
to a steady green light when the light is fully charged. For safety reasons.
please unplug the adapter after the light is fully charged.
Notes:
- ONLY use a OCSV/1 A adopter with the provided USB cable to power the unit. Using any other power adapter or cable may cause damage to the product.
- When this unit is not in use or when fully charged, it is recommended that you unplug it from the power source.
- Please use a lint-free dry cloth to clean the product. Do not clean the product with water or alcohol. Ensure the unit is unplugged and powered off before cleaning.
- Do not charge the light using a frayed or damaged USB cable.
- Do not touch the device, power adaptor, or USB cable with wet hands. Keep this product dry.
- DO NOT attempt to repair, disassemble, or modify the light under any circumstance.
- Do not place the light near fire. heat sources, or in direct sunlight.
- Ensure that this product has enough ventilation for general use.
- Only use on a flat, horizontal surface.
- To ensure longevity and lifespan of the unit, protect it from dust and do not place other objects on it.
Website: www.nexigo.com
Manufacturer: Nexight INC cs@nexigo.com
Tel: +1(458)215-6088
Address: 11075 SW 11th
St. Beaverton. OR. 97005.
US Made In China .Model :LT 20 