STORCH Piranha Li-ion 3.6 V Cordless Shears Instruction Manual

Piranha Akku-Schere 3,6 V Li-Ion

Piranha Li-ion 3.6 V cordless shears
Original instruction

**Responsibility of the operating company

**

The operating company must ensure the following:

• The device must only be used in an intended manner.
• The device must be maintained in accordance with the specifications in this operating manual.
• The device must only be operated in accordance with local guidelines and occupational health and safety regulations.
• All precautions are taken to avoid dangers arising from the device.
• All precautions are taken for first aid care and fire fighting.

Organisation/personnel Operators

• Before starting to use the device, the operator must have read and understood the operating manual.
• Only authorized and trained operators must have access to the device in order to operate it.
• The operating manual must be available to the operator at all times.
• The operator must not be under the influence of alcohol, drugs or medication.
• Children, performance-impaired persons, and pregnant women are not allowed to operate the device.

Technical data

Cordless shears

Rotational speed| max. 12,000 rpm
Li-ion 3.6 V battery,
(permanently built-in)| 1,300 mAh
Only for work indoors
Power supply| – 10° C to 50° C
In| 230 V, 50 Hz
Out| 6 V, 300 mA
Protection class| 2
Charging time| 3 – 5 hours

Scope of delivery

Li-ion 3.6 V cordless shears (battery permanently builtin), incl. two shear heads with blades, power supply, and operating instructions.

Intended use

The 3.6 V cordless shears are suitable for cutting various covering materials, such as non-woven fabric, cardboard, backing paper, wallpaper, etc. Both straight and curved cuts are possible.
Carefully read the operating instructions before use and, if necessary, make a note of the most important point for future use.

**** Safety information

This electrical cutting device fulfills the applicable standards of European and national guidelines and has been constructed in accordance with state-of- the-art technology. Pay close attention to the instructions and information contained in the operating instructions in order to ensure safe utilization.
CAUTION: Read all the safety information and instructions. Non-observance of the warnings and instructions can result in an electric shock, fire, and/or serious injuries.
The term “electric power tool” used in the safety instructions refers to mains-powered (corded) or battery-powered (cordless) electrical power tools.
Safety in the work area. Keep the work area clean and well lit.
Do not use the device in explosive areas, for example in the vicinity of flammable liquids, gases or dust. Electrical power tools can generate sparks that can lead to highly flammable materials igniting.
Keep a safe distance from children and other persons when working using this electrical power tool. Distractions can cause accidents.
Electrical safety. The connector plug provided with the power supply must fit into the plug socket. Do not modify the plug under any circumstances. Do not use adapter plugs with earthed electrical power tools.
Avoid body contact with earthed surfaces, such as heating pipes, stoves, and refrigerators. The risk of electric shock is increased if your body is earthed.
Only use the electrical device indoors. Do not expose the device to rain or moisture under any circumstances. Ingress of water into the electrical power tool can increase the risk of an electric shock.
**** Do not overstretch the power supply cord. Do not use the cord to carry or pull the electrical power tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of an electric shock.

Personal safety

**** Be careful when using the cordless shears. Do not use the shears if you are tired or under the influence of drugs, alcohol or medication. A single moment of carelessness when operating the electrical power tool may result in serious injuries.

Use personal protective equipment. Always wear eye protection. Using protective equipment, such as dusk masks, non-slip safety shoes, or hearing protection, helps to avoid injuries.
Avoid accidental starting. Make sure that the switch in the Off position before connecting a power source. Make sure not to accidentally press the switch when carrying the shears. Risk of injury!

Device description

**** This electrical tool is only suitable for work indoors.

1. Shearing head with built-in blades
2. Button for replacing the shearing head
3. Safety switch
4. Charging socket
5. LED charging indicator
6. On/Off switch lever

Charging the battery

**** Always make sure that the On/Off switch is in the Off position before charging the device.
The battery for these cordless shears was delivered at a low state of charge. Fully charge the battery before using the device for the first time.

Note:
The battery will not usually reach full charging capacity when charged for the first time. The full charging capacity will only be reached after a few charging cycles. The battery should only be charged indoors.
You should therefore initially leave the electrical power tool connected to the power supply for 7 hours. After the initial charging process and normal use, it will usually
take 3-5 hours to full charge the battery.
The battery and the power supply may feel warm during the charging process. This is normal and is not a malfunction.
Do not place the cordless shears, including the charger, in an area with extreme heat or cold. The ideal ambient
Charging indicator
Connects the adapter to a suitable power supply.
Important:
Check the voltage on the type plate. Insert the charger plug into the charging socket on the tool’s rear handle. The shears connection has a red LED. The LED will light up (red) as soon as the charger is connected.
temperature for charging is the normal temperature within heated inside rooms.

The LED goes out again once the battery is fully charged. Pull out the cord once charging is complete.

Replacing the cutting head

NOTE:
Make sure that the safety switch is in the Off position before replacing the shearing head.

1. Lift the knob in the housing above the shearing head (2) and hold it up while removing the shearing head.
2. Install the desired shearing head by pushing it into the tool until it engages, as shown in the image.

1. Switching on the device: Push safety switch (3) forwards and switch to On. Press the On/Off switch lever (6).|
2. Switching off the device: Release the On/Off switch lever and push the safety switch into the Off position.

Initial operation

Maintain proper footing and balance at all times. This enables better control of the device tool in unexpected situations.
Wear appropriate clothing. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. Before using the device for the first time, remove the charger from the socket and disconnect the device from the charger. The shears will not work if they are still connected to the charger.
Switch on the device.
Allow the cutting blades to move freely for a brief a moment before starting to cut.
Do not apply too much pressure on the tool. The perfect cut can be best made when there is no great resistance. Both straight and curved cuts can be made with great precision.

The cutting blades become hot during use; do not touch them under any circumstances until they have cooled down fully.
As soon as the blades become blunt, the cutting resistance increases and the cut will not look neat.
We therefore recommend that you replace the shearing head in a timely manner.
The following maximum material strengths must be observed in order to avoid damage to the shearing head:

Type plate and further information

The following label can be found on your cordless shears:

• Do not remove or modify any of the product labels.
• The cordless shears are not a toy. Always keep them in a place that is out of the reach of children.
• Do not use the device in the presence of children or allow children to operate the device.
• Do not position the device so that a person may deliberately or accidentally come into contact with the cutting blades.
• Always switch off the device and attach the protective cap to the cutting blades when it is not in use.
• Never attempt to repair or disassemble the device. If unqualified persons attempt to repair this device, this could result in serious injuries. Any repair work required on the device may only be performed by STORCH’s authorised after-sales service.
• Do not operate the device in explosive areas, for example, in the vicinity of flammable liquids, gases, or dust.
• Use of third-party accessories that have been designed for other shears could result in serious injury.
• If used incorrectly, liquid may be ejected from the battery; avoid contact with this liquid.
• If you do happen to come into contact with this liquid, rinse the area with water. If the fluids gets into your eyes, seek medical attention. The fluid that can come out of the battery may cause irritations or chemical burns.

Maintenance

The electric shears are a low-maintenance device. However, you should follow these simple guidelines to ensure best possible performance.

1. Always handle the device carefully. It is an electric device with electronic components that may be sensitive to rough or improper handling under certain circumstances.
2. Avoid exposing the device to severe shocks or to extremely hot and cold temperatures.
3. Always store the device indoors.
4. Keep the device away from dust and moisture. Only clean the device using a clean and soft cloth. Do not use aggressive cleaning agents.
5. Commercial microfibre cloths are suitable for cleaning.
6. Check the battery condition regularly to avoid premature aging. If the device is used for a longer period of time, you should charge the battery on a regular basis (every six months).
7. Do not disassemble the device.
8. Do not attempt to modify any part of the device.

.Maintenance:

• Caution: Always disconnect the mains plug from the electric circuit before maintenance!
• Maintenance that requires opening the device’s housing may only be carried out by an authorised STORCH specialist or an authorised STORCH service partner. Contact the free STORCH Technical hotline 0800 / 7867247 (only in Germany).
• Never touch plugs with moist hands.
• The installation and use of spare parts and accessories not sourced from the device manufacturer is prohibited!
• The maintenance intervals must be complied with.
• Changing operating parameters and components is prohibited.
• Annual inspection of equipment safety in accordance with DGUV V3 must be performed by a qualified person (electrician).

Warranty

Warranty conditions:
A warranty period of twelve months from the date of purchase/date of invoice applies to our tools for commercial customers. If we have granted an extended warranty period, this period will be noted separately in the operating manual for the equipment in question.
Claims:
If you wish to claim under our warranty or guarantee, please return the complete device and your invoice to our logistics centre in Berka, postage paid, or send it to one of our authorised service centres.
Please contact the chargeable STORCH service hotline first: +49 (0)202 . 49 20 – 110.
Your rights under our warranty or guarantee:
Claims can only be accepted for material defects or manufacturing errors, and only assuming intended use of the appliance. Wear parts are not covered by such claims. All claims shall become void in the event of installation of third party components, improper handling and storage, as well as in the event of obvious disregard of the operating instructions.
Repairs:
All repairs have to be conducted on our premises or by an authorised STORCH service centre.

EC Declaration of Conformity

Name / Address of issuer:| STORCH Malerwerkzeuge & Profigeräte GmbH
Platz der Republik 6
D-42107 Wuppertal
---|---

We herewith declare:
that the following machine complies with the fundamental health and safety requirements of the EC Directives in terms of its design, construction and version we have brought into circulation. This warranty loses its validity in case of unauthorised modification of the tool.

Applicable Directives
Machinery Directive:
EC Directive on Electromagnetic
Compatibility:
RoHS:| 2006/42/EG
2014/30/EU
2011 / 65 / EU
---|---
Applied harmonised standards| EN 62841-1:2015 + AC 2015     EN
55014-1:2017+A11:2020
EN IEC 63000:2018| EN 62841-2-2:2014
EN 55014-2:2015
---|---|---

Representative authorised to compile the technical documentation:
STORCH Malerwerkzeuge & Profigeräte GmbH
Platz der Republik 6
42107 Wuppertal

Jörg Heinemann
– Managing Director –
Wuppertal, 11-2016
Art. no. Description
21 28 35 Li-ion 3.6 V cordless shears
21 28 36 Shearing head, incl. blades

Malerwerkzeuge & Profigeräte GmbH
Platz der Republik 6
D-42107 Wuppertal
Telefon: +49 (0)2 02 . 49 20 – 0
Telefax: +49 (0)2 02 . 49 20 – 111
info@storch.de
www.storch.de

References

• STORCH Malerwerkzeuge & Profigeräte GmbH

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>