POWER PROBE PPMWL1000 Modular Work Light Instruction Manual
- June 3, 2024
- POWER PROBE
Table of Contents
POWER PROBE PPMWL1000 Modular Work Light
WARNING
TO REDUCE THE RISK OF INJURY, READ AND UNDERSTAND THESE SAFETY WARNINGS AND
INSTRUCTIONS BEFORE USING THE LIGHT. KEEP THESE INSTRUCTIONS IN THE LIGHT FOR
FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASE CONTACT YOUR POWER PROBE
TEK REPRESENTATIVE OR DISTRIBUTOR.
INTRODUCTION
PPMWL1000 is a professional-grade, hands-free Modular Work Light. This light will deliver efficient, dependable service when used correctly and with care. As with any fine light, for best performance, the manufacturer’s instructions must be followed. Please study this manual before operating the light, and understand the safety warnings and instructions. The instructions on operation and maintenance should be read carefully, and the manual kept for reference.
NOTE:
Additional safety measures may be required because of your particular
application of the light. Contact your Power Probe Tek representative or
distributor with any questions concerning the light and its use.
LIMITED WARRANTY
Power Probe Tek Products undergo a strict quality control inspection for workmanship, function, and safety before leaving the factory. From the date of purchase, we will warranty/repair Power Probe Tek products for one (1) year against defects in parts and workmanship. All repairs due to misuse will be charged a fee not to exceed the cost of the tool. All warranty units must be accompanied by a copy of the original sales receipt. In the event of a malfunction or defective unit, please contact your Power Probe Tek dealer.
For the latest product information and updated manuals, please go to powerprobetek.com.
This product has been designed and manufactured using high-quality, recyclable materials and components. The cross-wheeled bin symbol applied to the product indicates that it complies with European Directive 2012/19/UE. Please inquire about the collection of electrical and electronic products in your area. Please comply with the local regulations. Do not dispose of this product with your normal household waste.
SPECIFICATIONS
- Module Lumens (High, Low) 250, 125
- Total Light Lumens 1000
- Lux @ 1m (High, Low). 410, 205
- Beam Distance (High, Low). 40m, 29m
- CRI. 80
- Constant Current Yes
- Runtime (High, Low) 3h, 6h
- Battery 3.7V 1800mAh x 4
- Charger 100-240V, 5V3A
- Charging Time. 3-4 h
- Magnets. Yes
- Hook Yes
- Threaded Hole 1/4″-20
- CSA Certified Yes
- DOE/ CEC Yes
- Dust& Water Resistance Base Unit IP54 Modules IP65
- CE Certified. Yes
- EMC. Yes
- LVD. Yes
- ROHS Yes
- Battery IEC. Yes
- IEC 6247& 62778 Yes
- Weight 2.7 Ibs (1.2 kg)
- Dimensions. 14 x 3.3x 3″
LIGHT FEATURES
MODULE FEATURES
GETTING STARTED
CHARGING
- The unit should be fully charged before first use. Allow 3 to 4 hours for a full charge.
- To charge plug the charger into any 100V-240V AC power source. such as a wall receptacle. then plug the charger cord into the charging port on the base/charging module.
- Individual light modules must be installed into the base/charging module to be recharged.
- The light rings on the lighting modules will glow red while the modules are charging.
- Allow the unit to fully charge until the charging indicating lights on the light modules turn from red to green.
- Charge this light every month if not in constant use, and after each use when used often to ensure battery longevity.
OPERATING
- The light base/charging module has a master power button that controls all of the individual light modules when they are installed in the base module.
- The unit has four individual and removable lighting modules that can operate independently of the base module.
- Pressing the red tab beneath each lighting module releases the module from the base unit.
- To re-install the lighting module into the base unit. push into the base unit slot until it latches.
- Press the button once for low brightness. twice for high brightness. and thrice to turn it off.
- If the individual modular lights become out of sync with each other, while all the modular lights are in the base, press and hold the POWER button on the light base for 3 seconds. This will re-sync all the light modules together.
APAC
MGL APPA Corporation
cs.apac@mgl-intl.com
Flat4-1. 4/F. No. 35, Section 3 Minquan East Road,
Taipei, Taiwan
Tel: +886 2-2508-0877
CANADA &USA
Power Probe Group, Inc.
cs.na@mgl-intl.com
2810 Coliseum Centre Drive. Ste. 100. Charlotte.
North Carolina 28217 USA
Tel: + 1 833 533-5899
EMEA
Power Probe Group S.L.U.
cs.emea@mgl-intl.com
Parque Empresarial Argame, 33163 Mordn. Asturias, Spain.
Tel: +34 985-08-18-70
MEXICO & LATAM
Power Probe Group, Inc,
cs.latam@mgl-lntl.com
Colonia Industrial Vallejo Del. Azcapotzalco 02300, Mexico D.F
Tel: +1 833-533-5899
UNITED KINGDOM
Power Probe Group Limited
cs.uk@mgl-intl.com
14 Weller St, London. SE110U, UK
Tel: +34 985-08-18-70