NEXIGO NXG-PS5D-0515BWHT Charging Dock User Manual

NXG-PS5D-0515BWHT Charging Dock
User Manual

NXG-PS5D-0515BWHT Charging Dock

Welcome to the NexiGo Family!
Thank you for choosing the NexiGo product! You are now part of an exclusive club: the NexiGo family! It’s our job to make sure you enjoy your membership. If you have any problems please contact us at cs@nexigo.com at any time for further assistance. This product is covered by our generous -year manufacturers warranty. please visit
www.nexigo.com for more warranty information and register on www.nexigo.com/warranty for an EXTRA ONE YEAR warranty
From all of us here at NexiGo, we want to welcome you again to the family. We thank you deeply for your trust and your business. and we know you’ll love it here. We look forward to serving you again in the near future.
Yours Sincerely
The NexiGo Team

Contact Info:

Brand NexiGo
Website: www.nexigo.com
Manufacturer Nexight INC
Email: cs@nexigo.com
Tel: +1(458)215-6088

Product Introduction:

The D-5 charging station is specially designed for p-5 controllers. It can charge up to two PS wireless controllers simultaneously. The charging indicators will turn red or green to show the charging status of controllers. It is on red when the controller is charging. and on green when it is fully charged or on standby. The top of the front panel also shows the LOGO after power on. The intelligent chip is adopted in this charging station to check the charging status.
This charger comes with a special charging cable.
which can provide a large-current with the input power supply of 5V/2.6A for fast charging. The brief color and aesthetic appearance also perfectly match with your P-5 console. It is a must-have for game players.

Product Function and Usage Diagram:

product Features:

1. The intelligent micro control technology is adopted in charging indicator management;
2. It can charge two p-5 controllers simultaneously:
3. The indicator will turn red or green to show charging status. which you can know the charging state at a glance;
4. Aesthetic appearance with convenient placement;
5. Low power consumption in standby. energy saving and environment protection

Charging Process Instruction:

1. Plug the Type-C charging cable of this product into the Type-C power supply port on the back of the charging dock. and connect it with the back USB ports of the console or a wall charger with current and voltage at least 5V/26A to supply power. At this time. the LOGO in the front panel is in white. and the indicator shows red and green once respectively.
   then shows green pattern.

2. The LOGO indicator will be in white after power on.
   and will turn off when the power is cut off: the indicator in the middle shows the charging status of No.2 controller, and the bottom indicator shows the charging status of No.l controller.

3. efer to the attached drawing 2 of “Product Function Diagram and Usage Diagram” above.
   place the P-5 controller at a certain angle on the charging slot of the desktop charger for charging (note: when placing the controller. make the round rubber column on the charger align with the headphone hole of the controller. and then gently push into it).

4. The corresponding charging status indicator on the charging dock will be in red when the P-5 controller is undercharging: when the controller is charged up to about 90% power (about l hour). the indicator will turn to green. which means that the fast charging is completed: the rest 10% power will be charged by slow charging mode (about l hour to fully power).

Note : The indicator of the charging dock will be in green when in the slow charging mode. The orange indicator on the p-5 controller stops flashing means the controller has been fully charged. The indicator on the charging dock will briefly alternately flashes in red and green several times when the charging mode is switching.

Notice:

• When the battery level of the controller reaches above 80% or more. if you remove the controller and put it back. the controller will not be charged due to the battery protection function. The dock will continue to charge only after the battery level of the controller is below 80%.
  ·There are specific requirements on input voltage of this product. therefore. please conntect to the back USB ports of the console or a wall charger with current and voltage at least 5V/2.6A to supply power.

Electrical Specifications of the Charging Dock:

Electrical Parameters of the Charging Dock:

Input Property

Item| Technical Parameters| Unit
Rated input voltage| 5.0| Vdc
Scope of input voltage| 4.75-5.60| Vdc
Rated input current| 2.6| A
Maximum power consumption of standby| 0.3|
Output Property

Testing Item| Charging Current of Controllers| Unit| Remarks
Maximum charging current scope
of P-5
controllers| 800-1300| mA| The charging current may change in different
charging stages
Charging duration of the P-5 controller| 3| H| Charging to
90% byl hour; full charging by 2-2.5 hours

Environment Conditions:

Attentions:

1. The power adapter should be unplugged when the controller is fully charged or the station is not in use for a long time.
2. This product cannot be used and stored in a humid environment.
3. This product should be kept out from the dust and heavy loads to reach the maximum life-cycle.
4. Please do not use the product when it is soaked.  crashed. or damaged.
5. Keep this product away from children.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>