JB Atlas DS-500 Propane Scale User Manual
- June 3, 2024
- JB
Table of Contents
JB Atlas DS-500 Propane Scale
Introduction
Thank you for purchasing a JB Industries’ ATLAS DS-5000 scale. This device is capable of accurately measuring the weight of refrigerants while charging various systems used in the HVACR industry. This scale can display the weight readings on an easy-to-view back-lit LCD screen.
Specifications
- Capacity 5000g/176oz
- Accuracy 1g / 0.1oz
- Dimensions (L x W x H) 7.9″ x 5.9″ x 1.9″ (200mm x 150mm x 48mm)
General Safety
Use caution when charging all types of systems. Some refrigerants are flammable
or toxic. Pipes, tubes, refrigerant and other components of HVACR equipment
can be very hot (or very cold). Skin can easily be burned or frostbitten if
refrigerants and components are touched. Use adequate personal protective
equipment when servicing these systems. Follow all local and national codes,
rules, and regulations when servicing HVACR equipment.
Features
- Designed for R600a and R290
- Back-lit LCD display
- Powered by 2 AA batteries
- Large weighing platform
- High accuracy load cell
- Pass-through charging (moving the charge hose does not affect weight)
- Small diameter durable CLRF Series hoses included
- Charging valve included for precision charging
- Schrader valves included to prevent refrigerant loss/leaks
- Durable and sturdy plastic injection-molded components
- Cylinder adapter with Secure Seal low-loss fitting included for inverted charging
- 2 charging orientation options: upright and inverted
- Velcro loop included for stabilizing the refrigerant canister (upright charging)
- 1 Year Warranty
PART NO. DESCRIPTION
DS- 5000| ATLAS Propane Scale with two CLRF-18Y Series hoses, MBV4-01 Mini Ball-valve fitting, Propane cylinder adapter, Velcro loop, and case.
Operating Instructions
Installing Batteries
Remove the cover on the bottom of the scale and place 2 AA batteries inside Note the orientation of the + and – side of the batteries
Power Scale On/Off
- Press POWER button to turn on
- Press and hold POWER button to turn off
Screen Icons/Definitions
To Tare/Zero the scale:
With the scale on, press the POWER/TARE button to zero out the weight
Changing the Unit of Measure
The scale is capable of measuring grams and ounces
Press the UNIT button to change between grams and ounces
Back-light
The back-light will illuminate when the unit is powered on and will remain lit
while the reading is changing
If the reading is stable for 30 seconds, the back-light will turn off to save
power
Charging
Other charging methods are possible by using additional adapters for different
canister types, including side can piercing
See www.jbind.com for canister adapter kit information
Inverted Charging
- Connect the charging hose to the scale side port
- Connect the other end of the charging hose (with the charging valve closed) to the system
- Attach the Secure Seal adapter fitting to the refrigerant canister
- Invert the can and connect the Secure Seal fitting to the fitting on the scale platter
- Turn on the scale and scale will display combined weight of cylinder and gas
- Short press “TARE” button to zero scale
- Charge the system by throttling the charging valve and monitoring the scale weight
- Once the proper weight is transferred from the canister to the system, close the charging valve and remove the charging hose from the system
Upright Charging:
- Connect the charging hose to the scale side port
- Connect the other end of the charging hose (with the charging valve closed) to the system
- Attach can tap to the refrigerant canister (can tap should not release refrigerant)
- Connect one end of the hose to the can tap
- Connect the other end of the hose to the scale platter fitting
- Use the Velcro loop to secure the can to the hose and stabilize the can on the scale platter
- Open the can tap valve to release the refrigerant
- Turn on the scale and scale will display combined weight of cylinder and gas
- Short press the TARE button to zero the scale
- Charge the system by throttling the charging valve and monitoring the scale weight
- Once the proper weight is transferred from the canister to the system, close the can tap and charging valve and remove the charging hose from the system
RETURN FOR REPAIR
Every effort has been made to provide reliable, superior quality products. However, in the event your instrument requires repair, please contact JB Customer Service Department to obtain a Return Goods Authorization (RGA) number. Ensure that all returned products are packed to avoid any damage in shipment. Paperwork should be placed in a separate plastic bag and should include JB’s assigned RGA number, a description of the problem and any customer assigned repair or purchase order number, if applicable.
Contact Customer Service for RGA number:
- 800.323.0811 Toll-free
- 800.552.5593 Toll-free Fax
Products should be shipped with freight prepaid to:
- JB Industries
- RGA#_____
- 601 N. Farnsworth Ave., Aurora, IL 60505
Warranty
The ATLAS DS-5000 Propane Scale is warrantied against defects in materials and workmanship for 1 year from date of purchase. JB products are guaranteed when used in accordance with our guidelines and recommendations. Warranty is limited to the repair, replacement, or credit at invoice price, (our option) of products which in our opinion are defective due to workmanship and/or materials. In no case will we allow charges for labor, expense or consequential damage. Repairs performed on items out of warranty will be invoiced on a nominal basis; contact wholesaler for details. Additional product information available online at www.jbind.com.
WARNING: This product can expose you to chemicals including lead which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.