POVISON MF18228 LED Floor User Manual
- June 6, 2024
- POVISON
Table of Contents
USER
MANUAL
MODEL NO.:
MF18228
MF18228
Packing List:
Floor lamp + Adapter + Remote Control
Product structure and size:
Installation:
It’s very easy to install, as shown below:
Step 1: Connect the iron pipe with the light base by spinning clockwise.
Step 2: Then connect the iron pipe with the other iron pipes by spinning
clockwise.
Step 3: At last, connect their pipe with the LED round light by spinning
clockwise. The installation is finished, then plug in the adapter, you can
touch the control or remote control the light.
Specification
| Input Voltage | 100-240V50/60HZ |
|---|---|
| Adapter Voltage | 24V |
| Material | Iron + PC |
| Light Source | 126pcs LED |
| Power Consumption | 30W |
| Luminous Flux | 2700 lumens |
| Color Temperature | 3000K~6000K |
| Battery For Remote Control | 2*AAA Batteries |
| Remote Distance | Up to 33ft |
Product Care
- Please do not bend violently the lamp head to avoid damage when adjusting the angle of the lamp.
- Please read the user manual before use.
- Suggest Indoor use. It is nonwaterproof. Do not use this product in humid environments or at high temperatures.
- Cut off the power when cleaning it or not using it.
- Do not use it to exceed the voltage, the proper voltage for the US is AC110-120V, 60Hz.
- Please use the included power adapter, do not use other brands’ adapters. Do not plug or unplug the power cord with wet hands.
- Please stop using it if there are any defective issues found in the product.
Diagram
| 1 Brightness plus | 9 Color temperature minus |
|---|---|
| 2 Brightness minus | 10 Brightness minus |
| 3 Color temperature adjustment | 11 Brightness plus |
| 4 Power button | 12 Coffee mode |
| 5 One hour timer shutdown | 13 Reading mode |
| 6 Power button | 14 Office mode |
| 7 Daylight mode | 15 Feeding mode |
| 8 Color temperature plus | 16 Sleep mode |
Function Description
|
---|---
|
FCC STATEMENT
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Brand:Poison
Documents / Resources
|
POVISON MF18228 LED
Floor
[pdf] User Manual
MF18228, LED Floor
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>