Inglesina 4470464L Sketch Stroller Instruction Manual
- June 12, 2024
- Inglesina
Table of Contents
- WARNING
- SAFETY
- HINTS FOR USE
- RAIN COVER (IF AVAILABLE)
- MANUFACTURER’S CONVENTIONAL WARRANTY
- SPARE PARTS / AFTER SALES SERVICES
- HINTS FOR CLEANING AND MAINTAINING THE PRODUCT
- HINTS FOR CLEANING THE TEXTILE LINING
- INSTRUCTIONS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Inglesina 4470464L Sketch Stroller Instruction Manual
WARNING
- IMPORTANT – READ CAREFULLY AND KEEP FOR FUTURE REFERENCE. FAILURE TO FOLLOW THESE INSTRUCTIONS CAN JEOPARDISE THE SAFETY OF YOUR CHILD.
- YOUR CHILD’S SAFETY IS YOUR RESPONSIBILITY.
- WARNING! NEVER LEAVE THE CHILD UNATTENDED: IT CAN BE DANGEROUS. PAY UTMOST CARE WHEN USING THE PRODUCT.
- TO PREVENT THE BABY FROM FALLING AND/OR SLIDING OUT WITH SERIOUS INJURY RISKS, ALWAYS USE THE SAFETY BELTS PROPERLY FASTENED AND ADJUSTED.
- This product is suitable for babies from birth up to 15 kg (according to European Standard EN1888-1:2018).
- This product is usable for babies up to 17 kg.
- NEVER LEAVE THE CHILD UNATTENDED.
- ENSURE THAT ALL THE LOCKING DEVICES ARE ENGAGED BEFORE USE.
- TO AVOID INJURY, ENSURE THAT THE CHILD IS KEPT AWAY WHEN UNFOLDING AND FOLDING THIS PRODUCT.
- DO NOT LET THE CHILD PLAY WITH THIS PRODUCT.
- ALWAYS USE THE RESTRAINT SYSTEM.
- THIS PRODUCT IS NOT SUITABLE FOR RUNNING OR SKATING.
- With newborn babies, it is preferable to use the seat in its most reclined position.
- Avoid serious injury from falling or sliding out. Always use the restraint system and adjust it properly.
- The correct use of the restraint system is not a substitute for proper adult supervision.
- Be aware that the bumper bar is not an effective restraint. Always use the restraint system.
- Always use this stroller with the bumper bar correctly hooked on both sides.
- Do not lift the stroller by the bumper bar as it may disengage.
SAFETY
- Before assembly, ensure that the product and all its components have not been damaged during transport. Should this be the case, do not use the product and keep it out of reach of children.
- For the safety of your child, remove and eliminate all plastic bags and elements belonging to the packaging before use and, in any case, keep them out of reach of newborns and children.
- This product must be used to accomodate only one child.
- Before use:
- Make sure that the product is properly assembled, that all its components are properly fastened and that all the mechanisms are engaged. Make sure that the lining is properly secured to the structure.
- Make sure that the chassis is fully open and ensure that all the locking devices are engaged.
- Avoid finger entrapment, take care when folding and unfolding the product.
- Always make sure that the brake is engaged when positioning the child into the stroller seat/carrycot or taking him/her out, as well as during stops, and when assembling/ disassembling any accessory. Always use the parking brake, even when standing still for only a few moments.
- When parking check if the brake is properly engaged by moving forward/rearward the product.
- Never place the product close to stairs or steps even if the brake is engaged, as child movements may slide the product.
- Do not leave the stroller on a slope with the baby inside, even if the brake is engaged. Brake efficiency is limited on high gradients.
- Never use the stroller on stairs or escalators with the baby inside, as you may suddenly lose control of the product or the child may fall out. Also take extra care when going up or down a curb or other uneven surfaces.
- Maximum weight for objects placed in basket is 3 kg. Do not exceed the recommended maximum weight.
- Any load applied to the handle and/or the backrest and/or laterally to the product can compromise the stability of the product.
- Pets attached to the product may affect its stability and cause loose of control.
- Be aware of the risks related to open flames or other heat sources, such as radiators, fireplaces, electric and gas stoves, etc.: do not leave the product close to these heat sources.
- Make sure that all possible sources of hazard (e.g. cables, electric wires, etc.) are kept out of reach of the child.
- Never leave the product with the child inside in places where ropes, curtains or other objects can be used by the child to climb up or cause choking or strangling hazards.
- Never lift the stroller with the child inside.
HINTS FOR USE
-
Do not use the product if any part is broken, torn or missing.
-
Inspect the product and its components regularly for any signs of damage and/or wear, undone stitches and tears. In the event of damage or malfunction, keep the product out of the reach of children, do not use it and/or attempt to repair it, but turn exclusively to qualified staff.
-
Do not let other children or pets play unattended near the product or climb on it.
-
Assembly, disassembly and adjustments must be carried out only by adults. Make sure that the person using the product (baby-sitter, grandparents, etc.) are aware of its correct operation. This product must only be used by an adult.
-
While performing any adjustment, make sure that no moving part of the product (e.g. backrest, hood, etc.) comes into contact with the baby. Always make sure that the brake is duly engaged when performing these operations.
-
Do not open, fold or disassemble the product with the baby inside.
-
In any case, be particularly careful when performing these tasks with the child nearby.
-
Finger entrapment and scissoring actions may happen during these operations.
-
Do not leave the baby in the stroller when travelling on transport means (eg. train, bus, etc).
-
Do not use the stroller seat unit as a car seat.
-
When the product is not used, it must be stored out of reach of children. The product shall not be used as a toy! Do not let the child play with it.
-
Do not remove/attach the seat unit when your child is sitting in it and do not transport the baby in the stroller seat separately from the chassis.
-
In case of prolonged exposure to sunlight, let the product cool down before using it.
-
To avoid overheating and skin burns , do not expose the child to direct sunlight for prolonged period of time, even if the canopy is fully extended.
RAIN COVER (IF AVAILABLE)
WARNING!
- Use under an adult surveillance.
- When in use make sure the rain cover does not come in contact with the face of the child as it may cause suffocation.
- Don’t use the raincover on the product without a hood that can hold it.
- Use only on the Inglesina stated product.
- Do not use on products other than those recommended by the Manufacturer.
- To avoid risk of suffocation or overheating do not use it on sun or in enclosed areas.
- Hand wash at 30° C.
MANUFACTURER’S CONVENTIONAL WARRANTY
- L’Inglesina Baby S.p.A. guarantees that every article has been designed and manufactured in compliance with the general product quality and safety standards/regulations in force in the European Union and the countries it is marketed in.
- L’Inglesina Baby S.p.A. guarantees that during and after the manufacturing process, every product has undergone various quality controls. L’Inglesina Baby S.p.A. guarantees that, at the time of purchase from the Authorised retailer, every product had no installation or manufacturing defects.
- This warranty does not invalidate the rights acknowledged to the consumer by the applicable national legislation, which may vary depending on the country in which the product was purchased and the provisions of which, in the event of a contrast, prevail over the contents of the warranty herein.
- In the event of material or manufacturing defects detected at the time of purchase or during normal use, as described in the relevant instruction manual, L’Inglesina Baby S.p.A. grants a consecutive 24-month warranty from the date of purchase.
- The warranty is only valid in the country where the product was purchased and if it was purchased from an Authorised Retailer.
- The warranty acknowledged is valid for the first owner of the product purchased.
- The warranty covers the replacement or repair free of charge of parts with factory defects. L’Inglesina Baby S.p.A. reserves the right to decide at its sole discretion whether to apply the warranty via the repair or the replacement of the product.
- To apply the warranty, the product serial number needs to be presented, along with a copy of the receipt issued at the time of purchase of the product, making sure that the date of purchase is indicated in a clearly legible form.
- This warranty will be automatically made null and void in the event that:
- the product is used for purposes that are not expressly indicated in the relevant instruction manual.
- the product is not used in compliance with the relevant instruction manual.
- the product has been repaired by unauthorised and unaffiliated Customer Care centres.
- the structural or textile part of the product has been modified and/or tampered with, without prior expressed authorisation by the manufacturer. Any modifications made to the products relieve L’Inglesina Baby S.p.A. from any liability.
- the defect is due to negligent or careless use (e.g., violent shocks to the structural parts, exposure to aggressive chemical substances, etc.).
- the product presents normal wear (e.g., wheels, moving parts, fabrics) due to prolonged and continuous use.
- the product has been damaged, even accidentally, by the owner himself/herself or by third parties (for instance when it has been sent as luggage in air freight or using other means).
- the product is sent to the retailer for assistance without the original receipt and/or without the serial number or when the date of purchase on the receipt and/or the serial number are not clearly legible.
- Any damage caused by the use of accessories not supplied and/or not approved by L’Inglesina Baby, shall not be covered by the warranty.
- L’Inglesina Baby S.p.A. shall not be held liable for any damage to property or injuries to persons resulting from the improper and/or misuse of the product.
- After the warranty period has expired, the Company guarantees customer care service for consideration for its products for a maximum period of four (4) years from the date said products were placed on the market; after this period, assistance interventions will be assessed case by case.
SPARE PARTS / AFTER SALES SERVICES
- Regularly inspect the safety devices to ensure the product’s functionality over time. Do not use the product in the event of any malfunction and/or anomaly. Promptly contact your Authorised Retailer or the Inglesina Customer Care service.
- Do not use spare parts or accessories not supplied and/or not approved by L’Inglesina Baby S.p.A.
WHAT TO DO IF YOU REQUIRE ASSISTANCE
- If you require assistance for your product, immediatelycontact the Inglesina Retailer that sold it to you, with the “Serial Number” relative to said object ready on hand.
- It is the Retailer’s duty to contact Inglesina to assess the best suited intervention case by case and then provide the subsequent indications.
- The Inglesina Customer Care Service can provide any information, following written request by filling out the form provided on the website: inglesina.com – Warranty and Assistance section.
HINTS FOR CLEANING AND MAINTAINING THE PRODUCT
- This product requires regular maintenance by the user.
- Never force any mechanisms or moving parts; in case of doubt, check the instruction first.
- Do not store the product if it is still wet and do not leave it in humid environments since mildew may form.
- Store the product in a dry place.
- Protect the product against weather agents, water, rain or snow; moreover, continuous and prolonged exposure to sunlight can cause changes in the colour of many materials.
- Should the product be used on the beach, carefully clean and dry it afterwards in order to remove sand and salt as they may cause rusting.
- Clean the plastic and metal parts with a damp cloth or with a mild detergent; do not use solvents, ammonia or benzine.
- Carefully dry metal parts after any contact with water to prevent the formation of rust.
- Keep all moving parts clean and, if necessary, lubricate them with light oil.
HINTS FOR CLEANING THE TEXTILE LINING
- Seat cover and harness are surface wash only. Clean with a damp cloth and mild soap; do not use solvents, ammonia or bleach. Do not use abrasive cleaners or scrubbing pads.
- Follow the lining washing instructions on the labels.
- Dry the textile lining completely before using or storing it.
Do not bleach
Do not tumble dry
Dry flat in shade
Do not iron
Do not dry clean
Do not spin-dry
INSTRUCTIONS
LIST OF COMPONENTS fig. 1
A Hood
B Handrail
C Storage basket
OPENING THE STROLLER
fig. 2 To open the stroller, release the hook (P1) that ensures its
folding and unbutton the 2 press studs (P2) that hold the backrest on the
structure.
fig. 3 Holding the handle firmly on both sides, lift the stroller until
the correct opening click is heard.
REMOVING/ATTACHING THE FRONT WHEEL ASSEMBLY
In case of need, the front wheel assembly (D) can be easily removed.
fig. 4 To remove it, pull it out from the front support while holding
down the lever (D1).
fig. 5 To reinstall it, simply position it and push it until it clicks
into place.
**fig. 6 Caution: make sure that the wheels are properly attached before use.
**
REMOVING/ATTACHING THE REAR WHEELS
Should it be necessary, the rear wheels (E) can easily be removed.
fig. 7 To remove them, pull them out from the rear support while holding
down the button (E1).
fig. 8 To reinstall them, simply position them and push them until they
click into place.
fig. 9 Caution: make sure that the wheels are properly attached before
use.
REAR WHEELS BRAKE
fig. 10 To operate the brake, use the rear central lever (P3).
Always engage the brake during stops.
HANDRAIL
fig. 11 The handrail (B) can be open on one side or fully removed; to
open it, press the button (B1) and remove it from its housing; to remove it,
repeat the procedure on the other side.
ADJUSTING THE BACKREST
fig. 12 To lower the backrest, release the rear strap by pressing the
button (P4) on the central device (P5).
fig. 13 To lift the backrest, press the button (P4) on the central device
(P5) and simultaneously pull the rear ring (P6).
SAFETY BELTS
fig. 14 Ensure that the safety belts are inserted in the eyelets at the
height of the shoulders or immediately above. If the position is not correct,
remove the belts from the first pair of eyelets and reinsert them in the
second one; always use eyelets at the same height.
fig. 15 To move the back straps from one pair of slots to the other, open
the back zip (P7) on the backrest and remove the back straps through the
corresponding holes, on the internal rigid reinforcement (P8).
fig. 16 Then insert the back straps into the second pair of slots on the
backrest and pass through the corresponding holes on the internal rigid
reinforcement (P8).
fig. 17 Make sure that the back strap is properly inserted in the ends of
the waist one (P9).
fig. 18 Fasten the ends of the waist belt to the central buckle (P10).
fig. 19 Always use the crotch strap (P11) in combination with the waist
strap, making sure that they are all well adjusted around the baby.
Caution! Failure to comply with this precaution can cause the baby to
fall or slide out, with serious injury risks.
Caution: adapt the height and the length of the harness according to the
baby’s growth.
HOOD
fig. 20 To adjust the hood, simply accompany it to the desired position.
fig. 21 The hood features a fabric insert that extends the degree of
cover, improving protection from the sun.
HOOD LINING MAINTENANCE
The hood lining can be removed to allow for its correct maintenance.
fig. 22 To remove it, unbutton both rear press studs (A1).
fig. 23 Unbutton the 2 press studs (A2) that fix the hood to the
structure of the stroller and detach the side velcro (A3).
fig. 24 Open the internal zip (A4) and free the lining from the fixed
rear rib (A5).
fig. 25 Use a screwdriver (or similar tool, not included) to operate the
lever (A6) placed on the hood joint and\ simultaneously remove the front rib
(A7) from its housing.
fig. 26 Now remove the entire hood lining.
ADJUSTING THE FOOTREST
fig. 27 To lower the footrest (E), use both lower buttons (E1) and push
it down simultaneously.
fig. 28 To lift the footrest, simply pull it upwards and it shall automatically lock into position.
CLOSING THE STROLLER
fig. 29 To fold the stroller, press the small button (P13) and
simultaneously press the release button (P14) until the control device (P) is
released.
fig. 30 Then accompany the stroller downwards until it is completely
folded.
fig. 31 Always make sure that the closing hook (P1) is engaged.
Warning: act on the operating device (P) only during the folding and unfolding activities on the stroller. Pay attention not to operate accidentally this device during normal use of the stroller.
REGISTER YOUR PRODUCT
Do it now, for your baby’s safety.
It is an easy and fast operation, just visit the website inglesina.com to do
it.
To register the product is IMPORTANT because it provides us with the
possibility to contact you for important information about safety and
functionality of your product.
L’Inglesina Baby S.p.A.
Via Lago Maggiore, 22/26 – 36077 Altavilla Vicentina – Vicenza – Italy
Tel. +39 0444 392 200 – Fax +39 0444 392 250
inglesina.com –
info@inglesina.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>