cecotec 8435484041553 Power Black Titanium 1000 Jug Blender Instruction Manual
- June 4, 2024
- cecotec
Table of Contents
- cecotec 8435484041553 Power Black Titanium 1000 Jug Blender
- SAFETY INSTRUCTIONS
- PARTS AND COMPONENTS
- BEFORE USE
- PRODUCT ASSEMBLY
- OPERATION
- Maintenance
- TECHNICAL SPECIFICATIONS
- DISPOSAL OF OLD ELECTRICAL APPLIANCES
- TECHNICAL SUPPORT SERVICE AND WARRANTY
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
cecotec 8435484041553 Power Black Titanium 1000 Jug Blender
SAFETY INSTRUCTIONS
Read these instructions thoroughly before using the appliance. Keep this
instruction manual for future reference or new users. Make sure that the mains
voltage matches the voltage stated on the rating label of the appliance and
that the outlet is grounded. This appliance is intended for domestic use only.
Do not operate outdoors. Check the power cord regularly for visible damage. If
the cord is damaged, it must be replaced by the official Technical Support
Service of Cecotec, in order to avoid any type of danger. The blades inside
the product are very sharp, handle them carefully to avoid any possible cut.
Take extreme precaution during cleaning, maintenance or while emptying the
jug. Do not pour hot liquids inside the product while it is operating as it
could be ejected out causing burns. Do not leave the appliance unattended
while in use.
Always turn off and disconnect the appliance from the power
supply before assembling, disassembling, cleaning it or if it is not going to
be used for a long period of time. Pull from the plug, not the cord, to
disconnect it from the outlet.
Do not immerse the cord, plug, or any non-removable part of the appliance in
water or any other liquid, nor expose the electrical connections to water.
Make sure your hands are dry before handling the plug or switching on the
appliance. Do not touch the product’s surface that could reach high
temperatures. Use the handle provided.
Do not use accessories not provided or suggested by Cecotec, as these could
cause damage to the product or result in risk.
Do not twist, bend, strain, or damage the power cord in any way. Protect it
from sharp edges and heat sources. Do not let it touch hot surfaces. Do not
let the power cord hang over the edge of table or countertop. Do not use the
product outdoors, close to electric plates, gas, flames or inside an oven.
Extreme caution must be taken when moving appliances containing hoy liquids or
foodstuffs. Always turn the appliance off and disconnect it from the power
supply before changing accessories or approaching moving elements. Do not
expose the device to extreme temperatures. Do not introduce any utensil inside
the product during operation in order to reduce risk of injuries to persons or
damage to the product. A scraper may be used while the product is paused. Make
sure to keep the measuring lid in its position when blending hot liquids or
ingredients.Do not use the product if its blade is curved or damaged. Do not
operate the appliance empty. Make sure the accessory that is going to be used
is properly
assembled before operating the device.
Do not overfill the jar.
When blending fruits, remove hard bones before introducing them in the device.
Always operate the product with the cover in place. The appliance is not
intended to be used by children under the age of 8. It can be used by children
over the age of 8, as long as they are given continuous supervision. This
appliance is not intended to be used by persons with reduced physical,
sensory, or mental capabilities, or lack of experience or knowledge, unless
they have been given supervision or instruction concerning the use of the
appliance in a safe way by a person responsible for their safety, and
understand the hazards involved. Supervise young children to make sure that
they do not play with the appliance. Close supervision is necessary when the
appliance is being used by or near children.
PARTS AND COMPONENTS
- Measuring cup
- Lid
- Glass blending jar
- Motor base
- LED
- Speed knob
BEFORE USE
Take the product out of the box and remove all packaging material, stickers or
labels.
Make sure all the parts and accessories are present and that there are no
visible signs of damage. If there are, contact immediately the Technical
Support Service of Cecotec.
Place the appliance on a flat, stable and dry surface.
PRODUCT ASSEMBLY
To assemble the blending jar, introduce in the motor base.
To remove it from the main body, pull from it.
OPERATION
Turn the knob clockwise to set the desired blending speed according to the
food to be blended. 1 is the minimum speed and 5 is the maximum speed. Turn
the knob anticlockwise to active Pulse mode (P). The device will operate at
top speed.
Notes: Do not exceed the Max. mark on the jar. When preparing juices, use
2 parts of soft fruit and 3 parts of water (carrots and apples are considered
hard fruits). Do not operate the device at top speed for more than 1 minute.
CLEANING AND MAINTENANCE
Cleaning
Always turn the power knob to the “0” position, turn the switch off and unplug
the appliance after each use and before cleaning.
Use water to clean the jug. Do not use abrasive or chemical cleaning agents.
Use a dry, soft cloth to clean the motor base. Do not clean this part with a
wet cloth.
The only dishwasher-safe part is the jar.
The blades inside are very sharp, handle them with extreme caution in order to
prevent possible injuries.
Using the measuring cup, turn the joint system joining the blades and the base
of the jar counterclockwise. Once it has been loosened, carefully remove the
blades. Repeat the process in reverse to assemble the device.
Maintenance
If the product does not operate normally, produces uncommon noises or shakes more than it normally does, stop using the product and contact the Technical Support Service of Cecotec for reparation. Do not carry out maintenance tasks yourself.
Storage
After cleaning the device, make sure it is thoroughly dried before storing it.
After using the product, store it in a dry, safe place.
Avoid direct exposure to sun light.
Make sure it is stored in a place out of the reach of children.7. DISPOSAL OF
OLD ELECTRICAL APPLIANCES
TECHNICAL SPECIFICATIONS
04155 Power Black Titanium 1000
04156 Power Black Titanium 1000 Inox
1000 W, 220-240 V, 50/60 Hz
Jar capacity: 1.5L
Made in China | Designed in Spain
DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), specifies that old household electrical appliances must not be disposed of with the normal unsorted municipal waste. Old appliances must be collected separately, in order to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment.
The crossed-out “wheeled bin” symbol on the product reminds you of your
obligation to dispose of the appliance correctly.
If the product has a built-in battery or uses batteries, they should be
removed from the appliance and disposed of appropriately.
Consumers must contact their local authorities or retailer for information
concerning the correct disposal of old appliances and/or their batteries.
TECHNICAL SUPPORT SERVICE AND WARRANTY
This product is under warranty for 2 years from the date of purchase, as long as the proof of purchase is submitted, the product is in perfect physical condition, and it has been given proper use, as explained in this instruction manual. The warranty will not cover the following situations: The product has been used for purposes other than those intended for it, misused, beaten, exposed to moisture, immersed in liquid or corrosive substances, as well as any other fault attributable to the customer. The product has been disassembled, modified, or repaired by persons, not authorised by the official Technical Support Service of Cecotec. Faults deriving from the normal wear and tear of its parts, due to use. The warranty service covers every manufacturing defects of your appliance for 2 years, based on current legislation, except consumable parts. In the event of misuse, the warranty will not apply. If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact Cecotec Technical Support Service at +34 963 210 728.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>