Ear Technology Corp DryBoost UV Maintenance for Rechargeable Hearing Aids User Guide
- June 11, 2024
- Ear Technology Corp
Table of Contents
Ear Technology Corp DryBoost UV Maintenance for Rechargeable Hearing Aids
IMPORTANT SAFETY INFORMATION
This product is for household use. When using electrical products, especially
when children are present, basic safety precautions should always be followed,
including:
DANGER To reduce the risk of electrocution:
-
Do not use while bathing.
-
Do not place or store product where it can fall or be
pulled into a tub or sink. -
Do not place in or drop into water or other liquid
-
Do not reach for this device if it has fallen into water.
WARNING To reduce the risk of burns, electrocution, fire, or injury to persons:
-
NEVER look at the UV-C light when it’s on.
Looking at the UV-C light with the naked eye may cause severe burns to the eye. · Closely supervise use by, on or near children or invalids. -
Use this product only for its intended use as described in this guide.
-
Never operate this product if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return it to the place of purchase or service center for examination and repair.
-
Never place the product on a soft surface such as a bed. Keep any air openings free of lint, hair, and the like.
-
Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
-
The AC adapter included with your nit is made specifically for this product. Do not use it with another appliance, and do not use an adapter from any other electrical device in its place.
NOTE: This product is not designed to diagnose, prevent, monitor, treat, or alleviate disease.
OPERATING CONDITIONS
At an ambient temperature of 70°F (21°C) the operating temperature of this
appliance is 80-85°F (26-29°C).
UV-C lamp will shut off if lid is opened during the sanitizing* cycle. The
lamp also shuts off at the end of the 5 minute cycle time.
WARRANTY SERVICE (OUTSIDE NORTH AMERICA) Contact the place of business where
you obtained your drying unit.
Power Supply Information: INPUT: 100-240V 50/60 Hz, 0.8 A OUTPUT: 9 V 3 A
Power supplies used with this product are certified to UL. Consult label on
enclosed power supply for certifications.
DRYBOOST UV MODEL: DBU
©DRYBOOST UV ALL RIGHTS RESERVED.WORLDWIDE PATENTS AT
EARTECH.COM/PATENTS
DESIGNED BY EAR TECHNOLOGY CORP. IN THE USA. MADE IN CHINA.
Package Contents
-
DryBoost UV®
-
Power Adapter
-
Quick Start Guide
INSTALLATION INSTRUCTIONS
-
Plug the power plug into an electrical outlet.
-
Plug the other end into the Type-C USB port on DryBoost UV.
-
Thread your base charging cable through the opening in the back of DryBoost UV.
-
Place your charging base onto the tray, and plug your charging cable into your charging base.
-
Add your instruments to the charging base. Position the charging base so the tips and tubes receive maximum exposure from the UV-C lamp.
-
Plug in the USB Type-A end of the charging cable into the back of DryBoost UV.
DryBoost UV has an additional USB port in the back for charging other items (phone, watches, or other electronic devices). -
Close the lid and touch the power button.
Touch for 1 SECOND for sanitizing* (5 min.) and drying (6 hrs.)
**OR**
Touch and Hold for 3 SECONDS for sanitizing* (5 min.) only
DryBoost UV will shut off automatically at the end of the cycle.
Reduces 99.9% of bacteria, specifically Staphylococcus Aureus
Remember to register your DryBoost UV
www.dryandstore.com/warra
Need assistance?
NOTE 1-800-327-8547 |
info@eartech.com
Interrupt the cycle at any time by lifting the lid. The cycle will not restart
once the lid is closed. Touch the power button for one second to restart the
cycle
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>