GAMESIR F9 Phone Cooler User Manual

: June 5, 2024
: GameSir

Table of Contents

PACKAGE CONTENTS
REQUIREMENTS
DEVICE LAYOUT
ACCESSORIES LAYOUT
INSTALLATION AND USE
Documents / Resources

GAMES F9
PHONE COOLER
USER MANUAL

PACKAGE CONTENTS

GameSir-F9 1
Magnetic Sheet 1
Phone Clip 1
Transparent Protective Film 1
Wet & Dry Wipe Set 1
Type-C Cable (1.5 m) 1
User Manual 1
Certification 1

REQUIREMENTS

The following three requirements are applied for the three usage scenarios of the cooler accordingly:

Use the cooler only:
Compatible Devices: MagSafe-compatible iOS devices
Required Power Input: 5V/2A
Use the cooler with the attached magnetic sheet:
Compatible Devices: Phones, tablets, Switch, and other mobile devices without magnetic area
Required Power Input: 5V/2A
Use the cooler with the attached clip
Compatible Devices: Mobile phones with a width of 65-90 mm
Required Power Input: 5V/2A

DEVICE LAYOUT

GAMESIR F9 Phone Cooler - DEVICE LAYOUT

ACCESSORIES LAYOUT

Magnetic Sheet| Transparent Protective Film| Type-C Cable| Wet & Dry Wipe Set| Phone Clip

INSTALLATION AND USE

Tear off the protective film on the surface of the cooler.
The following three installation methods are adopted for the three
usage scenarios of the cooler:
1. Use the cooler only on MagSafe-compatible iOS devices: place the cooler’s magnetic surface on the back of the iOS device.
2. Use the cooler with the attached magnetic sheet on phones, tablets, Switch, and other devices without a magnetic area: place the magnetic sheet on the device’s back, then stick the cooler on the magnetic sheet.
How to Install the Magnetic Sheet
A. Use the attached wet and dry wipe set to clean the area where the magnetic sheet is to be placed.
B. Tear the film off the transparent protective film, place the protective film on the back of the mobile phone and remove bubbles to ensure a perfect fit of the protective film on the back of the mobile phone.
C. Tear off the release paper on a magnetic sheet, attach it to the protective film accurately; press for 30 seconds, and use after a 30-minute standing.
How to Remove the Magnetic Sheet
Open a corner of the protective film’s edge, then uncover it completely to remove the magnetic sheet from the phone.
Notes!
• Pay attention to avoiding the position of NFC while placing the magnetic sheet on the device with NFC function, otherwise, the NFC function will be affected.
• Devices that support wireless charging cannot be charged wirelessly when using the magnetic sheet.
Use the cooler with the attached phone clip on phones with a width of 65-90 mm: wrap F9 with the phone clip, pull out the clip and place the mobile phone in. 3. Use the Type-C cable to connect the Type-C port of the cooler and a USB power adapter (not included) after installing the cooler. Press the cooling mode switch once to reach Normal Cooling Mode with a solid green indicator; press the cooling mode switch twice to reach Hardcore Cooling Mode with a solid blue indicator.

PLEASE READ THESE PRECAUTIONS CAREFULLY.

DO NOT insert fingers, rods, or any other foreign objects into the fan’s exhaust opening to prevent any body damage or property damage.
CONTAINS SMALL PARTS. Keep out of reach of children under the age of 3. Seek immediate medical attention if swallowed or inhaled.
DO NOT use the product near fire.
DO NOT expose to direct sunlight or high temperatures.
DO NOT leave the product in a humid or dusty environment.
DO NOT impact the product or cause it to fall due to strong impact.
DO NOT touch the USB port directly or it might cause malfunctions.
DO NOT strongly bend or pull cable parts. Use a soft, dry cloth while cleaning.
DO NOT use chemicals such as gasoline or thinner.
DO NOT disassemble, repair or modify.
DO NOT use for purposes other than its original purpose. We are not responsible for accidents or damage when used for non-original purposes.
DO NOT look directly at the optical light. It might damage your eyes.
If you have any quality concerns or suggestions, please contact GameSir or your local distributor.

Nintendo Switch is a registered trademark of Nintendo Inc. All rights reserved. All other trademarks are property of their respective owners. Photos and illustrations are not binding. Contents, designs, and specifications are subject to change without notice and may vary from one country to another. This product is not distributed under the official license form or approved, sponsored, or endorsed by Nintendo Inc. This product is not manufactured for Nintendo Inc.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 o the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

https://www.gamesir.hk/pages/manuals-gamesir-f9
(E-MANUAL IN MORE LANGUAGES)