CTA PAD-DMCG Digital Articulating Desk Clamp Mount with Universal Security Enclosure Instruction Manual
- June 9, 2024
- CTA
Table of Contents
CTA PAD-DMCG Digital Articulating Desk Clamp Mount with Universal Security
Enclosure Instruction Manual
Thank you for choosing CTA Digital’s product. We hope that you will enjoy
using it.
Please follow the guidelines and instructions as laid out in this instruction
manual.
Package Contents
Instructions
Clamp Mount Installation
Gromment Mount Installation
Mounting Arm To Pole
Adjusting Vesa Joint For Tilt And Orientation Versatility
Note: Aqjust to the desired angle then tighten the screws using the Allen key as shown, alternating from each screw as you tighten them.
Adjusting Arm
VESA Compatible
75×75 100×100
To properly balance the arm with monitors mounted, adjust the spring tension using the supplied Allen Key as follows:
First, position and firmly hold the arm horizontally as shown. Ask for
assistance should you require it.
CAUTION:
To avoid damage to monitors or mount, always keep the arm in a horizontal
position while making adjustments.
Again, ask for assistance if required.
If the arm drops, turn the adjustment screw counter-clockwise until it stays in a horizontal position.
If the arm rises, turn the adjustment screw clockwise until it stays in a horizontal position.
CAUTION:
DO NOT over tighten the screws.
Connecting VESA Mount to Security Enclosure
Cable Routing
Using the provided clips, route the wire from your device to the power source
as illustrated to the right.
Caution
Pease be sure to fasten alte scrws securly before using, Faure to do so may
compromise integrity.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>