EXCLUSIVE HOME RD014887DSEHA1 Dia Single Curtain Rod Kit in Matte Nickel User Guide

EXCLUSIVE HOME RD014887DSEHA1 Dia Single Curtain Rod Kit in Matte Nickel User Guide

One (1) Rod Set Package Contains

• 2-PIECE ROD SET
  36-72 IN (91-183CM)

• FINIALS X2

• BRACKETS X3

• WALL SCREWS X6

• ANCHORS X6

• THUMB SCREWS X3

Instruction

1. GATHER THE FOLLOWING TOOLS: PENCIL, MEASURING TAPE, SCREWDRIVER AND ELECTRIC DRILL.
2. POSITION BRACKETS IN A DESIRED LOCATION ABOVE THE WINDOW BY MARKING WALL SCREW LOCATIONS WITH A PENCIL. BOTH BRACKETS SHOULD BE EQUAL DISTANCE FROM THE OUTSIDE OF THE WINDOW AND THE THIRD BRACKET IN THE CENTER. TIPS: IN MOST SPACES, A CURTAIN ROD SET LOOKS BEST HUNG ON THE WALL OUTSIDE OF THE WINDOW FRAME. ALLOW 1 TO 3 IN (2.5 TO 7.6CM) ON EACH SIDE OF THE WINDOW, 2 TO 4 IN (5 TO 10CM) ABOVE THE WINDOW FRAME.
3. IF FIXING TO DRYWALL, CHECK FOR BURIED CABLES AND PIPES BEFORE USING A DRILL BIT. DRILL TO A DEPTH OF 32MM AND INSERT ANCHORS. IF FIXING TO WOODEN BATTEN, NO ANCHORS ARE REQUIRED.
4. MOUNT THE BRACKETS WITH THE WALL SCREWS PROVIDED.
5. CONNECT THE TWO-PIECE ROD TOGETHER.
6. FIT ONE FINIAL TO ONE END OF THE ROD. SLIDE CURTAIN ONTO THE ROD BEFORE FITTING THE OTHER FINIAL.
7. PLACE CURTAIN ROD ONTO THE BRACKETS, TIGHTEN THE THUMB SCREWS.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>