EJEAS 416 Motorcycle Intercom User Manual
- June 14, 2024
- EJEAS
Table of Contents
EJEAS 416 Motorcycle Intercom
Key Descriptions
- Volume-
- Power/Pairing A (multifunctional)
- EKey
- Clips
- DKey
- Headphone port
- Volume+
- Telephone key (to answer the call, make pairing -handling with the phone)
- KeyC
- KeyB
- Turn off R6 quickly
V6 is a motorcycle Bluetooth intercom with Stable performance, maximum intercom distance 6n is about 1200 meters, and the general distance used in the field is about 300-800 meters, Iambi en is a headset Bluetooth with high performance (15 meters), can answer the phone automatically, the latest 6 n production technology and the non-spiral structure of ultra waves 6 unique, it has level 5 waterproof, high definition sound 6 n, It is designed especially for motorcyclists, you can guarantee it travel safety!
Typical installation schematic diagram
Installation guide
- Installation clips
- Main machine installation
- Install MIC headphones
- The installation is finished
- Connect to headphones MIC
Operating instructions
Instructions for using the telephone
-
Turn on/off:
-
Turn on: Long press I Power Key/Al Key time, release after about two seconds, the light indicates The phone’s power is turned on, thus the ignition is completed.
-
Power off: In the power on state, press directly [Power off key quickly]
-
Connect with the phone (GPS/MP3):
In the power-on state, press [ Telephone Key] in about 6 seconds, do not release it until the blue and red indicator lights shine alternately, activate the phone’s Bluetooth, search for the Bluetooth headset, find V6, and click pairing, after pairing the phone successfully, the indicator light of Bluetooth intercom turns into blue color and shines normally. (If GPS/MP3 supports Bluetooth function, and its operation is the same as mobile phone pairing) -
Receive a call
When a call arrives, without a 5-second operation, the phones will automatically receive -
Play and pause music
Press I Phone Key I briefly, (it is compatible with 95% of phone music players m 6 vii) -
Volume control:
If you want to increase the volume, press [ volume+ ], if you want to decrease the volume, press [ volume-] -
Play the lyrics
For the previous physical m LI, press [ volume+ ] within 2 seconds, the next physical m LI, press [ volume- ] within 2 seconds
**Bluetooth V6 Intercom Operation
**
Supports a main team that is paired with 5 sub-teams, 6 people use them together, the main team can choose a sub-team among A, B, C, D, and E to realize the communication.
Note:
The main device cannot talk to 5 sub-teams at the same time, the main device 6
can talk to 1 sub-team, you need to press the A, B, C, O, and E keys on the
main device to change
The pairing of Group A
- Press the power key of the main unit and sub-unit A (about 5 seconds), do not release until the red and blue indicator lights of the main unit and sub-unit shine alternately.
- Press the A key on the main device, pairing begins
- Ment, after successful pairing, only 6 lights indicate
- Blue lights of 2 teams shine, at this moment, the pairing of these two teams is successful but cannot make communication 6, the pairing record has not been saved, press the power keys of the main equipment and the sub-equipment of A (Key A),
- At this time, the frequency of flashing blue lights of these two equipment is generally synchronized, the sub-equipment of the main equipment can do normal communication, turn off the equipment at this time, the pairing record has been saved automatically. ethically!
The pairing of group B
- Press the power key on the main equipment to turn on normally (do not release until the light turns on), press the B key on the main equipment for about 5 seconds, do not release until (the blue and red light shine alternately), and then press the power on key on Ben’s sub-team for about 5 seconds, do not release until (the blue and red light shine alternately), and press the B key on the main team.
- At this time, it enters the pairing state of group B, after pairing successfully, the red lights of the main equipment and the subequipment of B go out, and only the blue lights ules shine! If the pairing is successful.
- Press button B of the main equipment again to enter the communication state. Thus, you can make the communication
- The pairing record has been saved automatically.
The pairing of Group C
Press the power key of the main equipment to turn on normally (do not release until the light turns on), and press the C key of the main computer in about 5 seconds. and press the C key of the main team, at this time, it enters the pairing state of group C, after pairing successfully, the red lights of the main equipment and C sub-equipment go out.
- The blue lights shine! If the pairing is successful, press the C key of the main computer again to enter the communication state 6! That way, you can make communication!
- The pairing record has been saved automatically. and press the C key of the main equipment, at this time, it enters the pairing state of group C, after pairing with xlto, the red lights of the main equipment and the sub -C team shut down. s 6 the blue lights shine! If the pairing is successful,
- Press the C key on the main computer again to enter the communication status 6 n! Thus, you can make communication. The pairing record has been saved automatically. The D and E group pairing methods are the same as above, but you need to press the corresponding D and E keys.
- Simply put, A, B, C, D, and E of the main computer are paired with the A keys of 5 sub-computers respectively after pairing.
- You can press the key of A, B, C, D, E on the main equipment to make communication 6 with 1 of 5 groups, communication 6 cannot be made between the sub-equipments of A, B, C, OF!
Product Accessories
Technical Parameters
- Bluetooth version: 3.0
- Chip: CSR BC5
- Intercom distance: 1200 m
- Bluetooth Headphone Distance: 10m
- Battery capacity: 850 mA
- Battery type: Polymer
- Operating voltage: 3.3V-4.2V
- Communication time: 12 hours
- Standby time: 400 hours
- Charging time: 2.5 hours
- Speaker power: 0.12W
- Waterproof level: IP65
- Operating temperature range: -30°C to +60°C
- Charger specifications: USB charging (5V 0.5 ~ 2A)
Precautions for uses
- Please install it correctly, when it is raining, let the headphone port of the main machine facing down, make the earphones fully insert into the port, avoid allowing water to enter the main machine.
- To ensure the usage time of the battery, please use the normal charger.
- To ensure the safety of riding, it is not recommended to listen to the music in the riding state.
- In the assembling state, do not operate the main machine keys manually, pay attention to safety.
- To ensure communication distance, please try to use it in open places.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>