EJEAS Q8 Mesh Group Intercom System User Manual
- May 15, 2024
- EJEAS
Table of Contents
- Q8 Mesh Group Intercom System
- Product Specifications:
- Product Usage Instructions:
- Basic Operation:
- Battery Status:
- Mesh Intercom:
- Microphone Mute:
- VOX Voice Sensitivity:
- Pairing Steps as Members:
- Intercom Reconnection:
- Q: How do I know when the battery is low?
- Q: Can I charge the device while using it?
Q8 Mesh Group Intercom System
“`html
Product Specifications:
- LED Light: Blue, Red, Green
- Antenna
- Phone/Power Button
- Intercom Button
- Volume -: Decrease volume
- USB Charging Interface
- Headphone Jack
- Volume +: Increase volume
- MESH 6 People Intercom
- Bluetooth Intercom
- Music Share
- IP67 Waterproof
- Voice Assistant
- FM Radio
- Support EUC Remote Support Mobile App
Product Usage Instructions:
Basic Operation:
Power ON/OFF:
ON: Long press the Phone/Power Button for 1 second
until the blue light flashes with a voice prompt.
OFF: Long press both the Phone/Power Button and
Intercom Button until the voice prompt says Power off.
Battery Status:
Low Battery Indication: Red light flashes twice with a
voice prompt when battery is low. Device auto powers off when
extremely low.
Charging Indication: Red light is on during USB
charging and off when fully charged.
Mesh Intercom:
Mesh intercom allows Bluetooth music playback simultaneously.
It’s a multi-hop technology mesh network intercom with up to 6
people.
Microphone Mute:
Mute microphone in Mesh Intercom by pressing the Intercom
Button; unmute by pressing again.
VOX Voice Sensitivity:
In Mesh intercom, press and hold the + to cycle through
sensitivity levels (1-5).
Pairing Steps as Members:
-
All devices enter pairing state by long-pressing the Intercom
Button. -
Select one as the paired server by pressing the Phone/Power
Button. -
Wait for Pairing Successful prompt and Channel information to
start communication.
Intercom Reconnection:
To power on for next use, short press the Phone/Power
Button.
Frequently Asked Questions (FAQ):
Q: How do I know when the battery is low?
A: The device will indicate a low battery with red light flashes
and a voice prompt.
Q: Can I charge the device while using it?
A: Yes, the device can be used while charging after powering
on.
“`
More Languages
Q8
User Manual
Mesh Group Intercom System
Product Details
LED Light
Blue Red Green
Antenna
Phone/ Power Button
Intercom Button
Volume –
USB Charging Interface Headphone Jack
Volume +
MESH 6 People Intercom
Bluetooth Intercom
Music Share
IP67 Waterproof
Voice Assistant
FM Radio
Support EUC Remote Support Mobile App
Product Installation
or
Product Operation
Operation Diagram
2s
5s
Click
Double-click Long-press Long press Long press for 2 seconds for 5 seconds
Basic Operation Power ON/OFF Please charge it before using
ON
Long press <Phone/Power Button > for 1 second, until the blue light flashes
with a voice prompt.
Blue light flashes slowly
OFF
Long press < Phone/Power Button > + < Intercom Button >, until the voice
prompt says “Power off”
Indicator light off
Reset: It will automatically power off while charging and can be used while charging after powering on.
Low Battery Indication
Charging Indication
When the battery is low, the red light flashes twice with a voice prompt “Low Battery”. When the battery is extremely low, the device will automatically power off.
The red light is always on when using USB charging.The red light is off when fully charged.
Battery Inquiry: After connecting to the phone via Bluetooth, you can see the power icon on the phone side.
Mesh Intercom
When entering the Mesh intercom, Bluetooth music can be played at the same
time .
Mesh intercom is a multi-hop technology mesh network intercom (Communication frequency 470-488MHz). On account of large number of participants and unrestricted location, people are able to move at will within the effective range. It is not only superior to the traditional Bluetooth chain intercom, but has a longer transmission distance and better anti-interference ability.
Features: Intercom with up to 6 people, 5 channels in total.If participating in campaign mode as a listener, there is no limit to the number of people who can join the intercom in a listen-only manner.
Microphone Mute
When using Mesh Intercom, you can mute the microphone with a short press of
the < Intercom Button , so that the sound of your own voice will not be sent
to others.
“Microphone Mute”
Press
Note: Only valid for Mesh intercom.
VOX Voice Sensitivity
When using Mesh intercom, the system will enter a sleep mode when there is no
speech detected. Speaking will immediately activate the system and start the
intercom. Users can adjust the voice activation sensitivity to suit their own
voice and avoid false activations or the need for excessively loud sounds to
activate the system. There are 5 levels of sensitivity settings, default level
3. Level 5 has the highest sensitivity and is the easiest to activate the
system, level 1 has the lowest sensitivity. When driving at high speed, please
use low level to avoid wind noise to activate the microphone, and speak loudly
to activate the microphone; while at low speed, you can use high level so that
whispering can easily activate the microphone.
1s
After turning on Mesh intercom, press and hold the
1->5->1 cycle switching. “{VOX n}n is 1~5, indicating 5 levels”
4
Pairing Steps as Members
All devices first enter the intercom pairing
5s
state, long press
5s) until you hear a prompt and the red light
and green light flash alternately.
Red light and green light flash alternately “Mesh Pairing”
Paired Server
Take one of them as the paired server, press
Red light and green light flash alternately “Bi”
Wait for a moment and hear “Pairing Successful” from all devices, which means
the pairing is successful.
“Pairing Successful”
Wait a few moments and you hear the prompt “Channel n, xxx.x megahertz” from all the intercoms, you can start communicating and hear each other’s voices.
Intercom Reconnection
Turn off MESH Intercom
1s
When you power on the intercom for the next use, short press the <Intercom
Button>.
You will hear the prompt “Join the Mesh.” Wait for a moment, and you will hear
the prompt ” Channel n, xxx.x megahertz”, you can talk to each other.
Press and hold the
The voice prompts “Mesh Close”.
If the device is powered off without turning the intercom off, the intercom will be automatically restored upon the next power-on.
5
Pairing Steps as Listeners
In the case that other intercoms have formed a team, you can become the
listener of the team through pairing.
Take the intercom to be paired, enter listening mode
5s
pairing, long press
(about 5s), and prompt “Listen Mesh Pairing”, the red
light and green light will flash alternately.
Red light and green light flash alternately “Listen Mesh Pairing”
5s Paired Server
Paired Server
Take an intercom that has been paired as a paired server, entering listening
mode pairing, and press and hold
“Listen Mesh Pairing”
3 Short press the
Red light and green light flash alternately “Du”
Wait a moment and hear “Pairing Successful” from all intercoms. Wait a few
more minutes and hear “Channel n, xxx.x MHz”. This means that you have joined
the intercom network and can communicate with others.
Intercom Channel Switching
There are 5 channels in total, short press
“Channel nxxx.x MHz”
6
Two-person Bluetooth Intercom
How To Pair With The Device
5s
After powering on the device, press and hold <Phone/Power Button> + <Volume
+> (about 5s) until the red and blue lights flash alternately, and the pairing
voice prompts “Intercom Pairing”. Wait for connection to other intercoms.
Red light and blue light flash alternately
The other intercom enters the pairing state using the
5s
same operation. After the two intercoms discover each other, one of them will initiate the pairing connection.
The connection is successful and the intercom begins.
Pairing with The Old Models 5s
B
FM A
or
Intercom Connection
Simultaneously press and hold <Phone/Power Button> + <Volume +> + <Intercom
Button> for approx. 5 seconds to start pairing (red and blue lights flash
alternately).
Red light and blue light flash alternately
For older models (V6/V4) follow the instructions to enter the search and wait
for successful pairing.
Intercom Disconnection
1s
Blue light flashes rapidly
7
Pairing With Headsets or Other Branded Bluetooth Intercoms Search
Note: It is not guaranteed to be compatible with all Bluetooth headsets or
intercoms on the market.
Long press <Phone/Power Button> + <Volume +>
5s
(approx. 5s) until the red and blue lights flash alternately and the prompt “Intercom pairing” is
displayed.
Red light and blue light flash alternately
“Intercom Pairing”
Click again on <Phone/Power Button> + <Volume +>. The voice prompts “Intercom
Searching”. The red and blue lights flash alternately.
Red light and blue light flash alternately “Intercom Searching”
HFP-enabled intercoms
Others
At this point the intercom is searching for other intercoms in the pairing state, and when it finds another intercom, it will initiate the pairing.
Successful Pairing
Firmware Upgrades
Connect to the computer with a USB data cable. Download and open the “EJEAS
Upgrade.exe” upgrade software. Click on the “Upgrade”
button to start and wait for the upgrade to complete. Note: charging and
upgrading must use the standard data cable from EJEAS.
8
Mobile Phone Pairing
This intercom supports connection to mobile phones for playing songs, making
calls, and waking up voice assistants. Up to 2 mobile phones can be connected
at the same time.
After powering on the device, press and hold (approx. 5s)
5s
the <Phone/Power Button> until the red and blue lights flash alternately and the voice prompts “Phone Pairing”.
Red light and blue light flash alternately
The phone searches for the device named “Q8” using Bluetooth. Click on it to
connect. Q8
Connection Blue light double flashes slowly successful
Current battery level is displayed on the phone’s Bluetooth icon Mobile phone
HFP connection required Bluetooth Reconnection With Mobile Phones After
switching on, it automatically connects back to the last connected phone
Bluetooth. When there is no connection, click on the < Phone/Power Button > to
reconnect with the last mobile device that was connected to Bluetooth.
Mobile Control
Call Answering
When a call comes in, click on the <Phone/Power Button>
9
Call Rejection
Hang Up
1s
Call Redial
Cancel Redial
When a call come,press During a call ,click on When standby/playing
During redial,click on
the <Phone/Power Button> the <Phone/Power
music,quickly double-
<Phone/Power Button>
for about 1s
Button>
click the <Phone/Power
Button>.
Phone Priority When a call comes in, it will interrupt Bluetooth music, FM radio, intercom, and resume after hanging up.
Music FM Intercom
Music FM Intercom
Incoming Calls Interruptions
End
Resume
Voice Assistant When in standby/playing music, press and hold <Phone/Power Button>, it depends on your mobile phone.
1s
Press and hold <Phone/Power Button> to wake up voice assistant.
Voice Assistant
“Open Music” “Previous Song”
“Next Song” “Call EJEAS” “Open Navigation”
Music Control
Play/Pause
Previous Song
Next Song
Music Playing
Volume –
Volume +
10
FM Radio FM On/Off
After turning on the FM radio, it will automatically search for stations and
play the found station. FM can be turned on during the intercom, and you can
listen to the radio while talking.
Press and hold <Volume +> + <Volume -> (approx. 1s). The prompt ” FM Radio “.
Press and hold <Volume +> + <Volume -> (approx. 1s) .The prompt ” FM Radio
Off “.
Switching Channels
Frequency –
Frequency +
Volume Adjustment FM with a total of 7 volume levels
When using FM alone
VolumeWhen FM + Intercom
Volume+
Volume-
11
Volume+
Music Share
Share the music played by Bluetooth on your phone to another device, and this
function cannot be used during Bluetooth intercom. This function cannot be
used when two phones are connected simultaneously.
Take an intercom as the host, connect it to the phone, and the other one is
the slave.
Press the <Phone/Power Button>+<Volume -> at the same time between the host
and slave to enter the music sharing search connection state.
“Music Share”
After the connection is successful, play the phone music of the host, and the
music can also be played from the speaker. “Music Share Connected”
Press the <Phone/Power Button>+<Volume -> again to exit music sharing.
“Music Share Disconnected”
12
EUC Remote Controller (Optional) Buttons Introduction
Buttons
Actions
Function
Short press
(Music Alone
or FM Alone)
Intercom Volume +/ Music Volume +/ FM Volume +
FM Button C Button
Volume +
Long press
Next song when music is playing. Increase the frequency when FM is on
Double click
(Simultaneous Music
and Intercom)
Intercom Volume +/ Music Volume +/ FM Volume +
B Button A Button
Volume –
Short press
(Music Alone or FM Alone)
Long press
Intercom Volume -/
Volume +
Music Volume -/
FM Volume Previous song when Phone Button
music is playing.
Decrease the frequency when FM is on
Volume –
Double click
(Simultaneous Music
and Intercom)
Intercom Volume -/ Music Volume -/ FM Volume –
Short press Phone Button
01. Answer a call when it comes in 02. On call, hang up 03. Music play/pause 04. When no mobile phone is connected Connect the last connected phone
Buttons
Long press Double click
Reject calls Voice assistant
Last number redial
A Button
Short press
01. Turn on mesh intercom
02. Mute/unmute microphone when mesh is connected
Long press
None
C Button
Double click
Switch VOX sensitivity during Mesh intercom
Short press
Turn off Mesh Intercom
FM Button
Actions
Function
Short press
Initiate Bluetooth Intercom Connection
Long press
Disconnect the intercom
Double click Music sharing start/end
Short press
Turn FM on/off
B Button
Long press Double click
None None
Volume +
FM Button
Super Long Press
Clear handle pairing records
13
EUC Pairing
Press and hold the <Phone/Power Button> + <Volume -> for about 5s to enter
the pairing mode, the voice prompts “Remote Control Pairing”, the red and blue
lights flash alternately, if the pairing is not successful within 2 minutes,
exit the pairing.
Red light and blue light flash alternately
Press and hold the < FM Button >+ < Volume – > on the handle for about 5s to
clear the record until the red and blue lights come on.
Until the red and blue lights come on
Click any button of EUC Any
Pairing Successful No successful pairing within 2 minutes, exit the pairing
EUC Handle Operation
Mesh intercom reconnect/disconnect and mobile phone control are the same as on
the machine.
Bluetooth Intercom Connection
Bluetooth Intercom Disconnection
FM On/Off
FM C B A
1s
FM C
B A
FM C B
14
Mobile App
Download and install SafeRiding mobile APP for the first time.
Press and hold (approx. 5s) <Phone/Power Button> until the red and blue lights
flash alternately to enter phone pairing.
Red light and blue light flash alternately
Open the APP, click on the Bluetooth icon in the top right corner, the
interface shows the name of the intercom device searched, select the intercom
device to be connected, click to connect. (IOS system need to enter the phone
pairing again, in the system settings->Bluetooth, connect audio Bluetooth).
Open the APP the next time you use it. Click the Bluetooth icon in the top
right corner and click to select Intercom for connection from the paired
devices.
APP provides intercom group, music control, FM control, switch off, check
authenticity and other functions.
Restore Default Settings
Press and hold <Phone/Power Button> + <Volume +> + <Volume -> for about 5s,
the voice prompts “Restore Default Settings” to delete the pairing record, and
then automatically reboot the phone.
15
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>