EJEAS AIH1 Smart Helmet Headset User Manual

EJEAS AIH1 Smart Helmet Headset

Product Information

Specifications

• Bluetooth Name: AiH1
• Reconnect automatically when turning on
• Automatically enters pairing state when there is no connection
• Automatically answer the call after 10 seconds when a call comes in
• Automatically turn off after 10 minutes when there is no connection or no audio playing
• Supports connection of 2 Bluetooth devices

Product Usage Instructions

Product Buttons and Operation

The Smart Helmet Headset has two buttons for different functions:

LED Light Function Button

Actions and Functions:

• Volume +: Click to go to the next song when music is playing.
  Long press to increase the volume.

• Volume -: Click to go to the previous song when music is playing. Long press to decrease the volume.

Function Button

Actions and Functions:

• + Volume -: Click to answer a call when it comes in, hang up during a call, play/pause music.
• + Volume -: Long press to turn on the device, activate voice assistant, or reject a call.
• + Volume -: Double-click to redial the last number.
• + Volume -: Triple-click to disconnect the previous phone and pair with a new one.
• + Volume -: Long press to turn off the device.

Status Indication

The LED light and voice prompts provide status indications for different scenarios:

• Turn On: Blue light on, Voice Prompt: “Turn On”
• Charging: Red light always on, Voice Prompt: None
• Turn Off: Red light on, Voice Prompt: “Turn Off”
• Fully Charged: Red light off, Voice Prompt: None
• Bluetooth Pairing: Red and blue lights flash alternately (0.3s)
• Low Battery: Red light flashes slowly (0.2s on, 1s off), Voice Prompt: “Low battery”
• Bluetooth Connected: Blue light flashes slowly (0.2s on, 2s off), Voice Prompt: “Connected”
• Audio Player: Blue light flashes slowly, Voice Prompt: “Maximum volume” / “Minimum volume”

FAQ

How many Bluetooth devices can be connected to the AiH1?

The AiH1 can be connected to up to 2 Bluetooth devices simultaneously.

What should I do if the device is not pairing with my Bluetooth device?

If the pairing process is not successful, please try the following:

• Reorient or relocate the receiving antenna.
• Increase the separation between the AiH1 and your Bluetooth device.
• Connect the AiH1 to a different power outlet from your Bluetooth device.
• Consult the dealer or an experienced radio/TV technician for further assistance.

Can I modify or make changes to the device?

No, any changes or modifications not expressly approved by the responsible party may void the user’s authority to operate the equipment.

Is the device compliant with FCC Rules?

Yes, this device complies with Part 15 of the FCC Rules. It must not cause harmful interference and must accept any interference received, including interference that may cause undesired operation.

www.ejeas.com

Product Buttons and Operation

Status Indication

1. Turn On
   LED Light: Blue light on
   Voice Prompt: Turn On

2. Turn Off
   LED Light: Red light on
   Voice Prompt: Turn Off

3. Bluetooth Pairing
   LED Light: Red and blue lights flash alternately (0.3 S)
   Voice Prompt: Pairing successful

4. Bluetooth Connected
   LED Light:Blue light flashes slowly
   （0.2s on, 2s off）
   Voice Prompt: Connected

5. Audio Player
   LED Light:Blue light flashes slowly
   Voice Prompt: Maximum volume /Minimum volume

6. Charging
   LED Light: Red light always on
   Voice Prompt: None

7. Fully Charged
   LED Light: Red light off
   Voice Prompt: None

8. Low Battery
   LED Light: Red light flashes slowly
   （0.2s on,1s off）
   Voice Prompt: Low battery

Bluetooth

FCC

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
and (2) this device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>