SW-MOTECH BC.HTA.41.983.30000B Side Case Set URBAN Instruction Manual
- June 4, 2024
- SW-MOTECH
Table of Contents
ANBAUANLEITUNG
mounting instructions
BC.HTA.41.983.30000/B
BC.HTA.00.677.10000L/B
MOUNTING INSTRUCTIONS
URBAN ABS side case
Thank you for choosing this premium product from SW-MOTECH. Please visit our
webshop for additional information, such as application charts and PDF
mounting instructions. Any other documents that may be required (e.g. ABE
certifications) are also available for download at our webshop.
Installation and/or maintenance of this product require good technical
understanding! For your own safety, SW-MOTECH recommends having installation
and/or servicing carried out by a specialist workshop! SW-MOTECH assumes no
liability for damage caused by improper installation and/or maintenance work!
Carefully follow all the directions given in the mounting instructions and pay
attention to all relevant information in the vehicle manual during assembly.
Nonconformance can lead to vehicle damage or even endanger the driver! These
mounting instructions are written based on our current state of knowledge.
Legal requirements for accuracy do not exist.
This product was developed for vehicles in their factory setting.
Compatibility with original accessory parts or other manufacturers’ accessory
parts is not guaranteed. Furthermore, BEFORE installing this product, make
sure that all moving parts (e.g. the chain) are in the original state of
maintenance. Installed accessories can change the driving behavior and/or
stability of your vehicle.
GENERAL INFORMATION
Observe the country-specific regulations concerning vehicle
registration/operation as well as TUV regulations if applicable. If required,
register installed parts in the vehicle documents through an appropriate
inspection authority.
PREPARATION: Read the mounting instructions carefully and make sure that
all items on the parts list are included. Make sure that your vehicle is
parked safely and cannot fall over. Turn off the engine and remove the
ignition key. Let the motor/exhaust cool off if necessary. Disconnect the
vehicle battery when working on the electrical system. Use appropriate tools.
Have another person to help you.
FUNCTION CHECK: This is a universal product. For this reason make sure
BEFORE the first use, that the product can be fixed properly and used without
problems with your vehicle type. After fixation also makes sure that no
moving parts are obstructed and the function of the vehicle is not hindered in
any way. Lamps as taillight and turn signals must not be limited in their
function. Cables and hoses must not rub and/or be pinched. Before starting to
ride, perform a comprehensive check of all functions.
PRODUCT SPECIFIC INFORMATION
ATTENTION: Riding with this product may affect the motorcycles driving and
braking performance!
ATTENTION: Depending on the location of fixation, cornering and ground
clearance can be reduced by using this product!
ATTENTION: Before riding and at each stop (every 200 km) check the proper
fixation of the product!
| Maximum Load | Maximum Speed |
|---|---|
| 5 KG (11 lbs) per case | 130 km/h (80 mph) |
ATTENTION: The maximum vehicle load specified by the manufacturer must
not be exceeded!
ATTENTION
NOT FOR OFFROAD USE!
SW-MOTECH GmbH & Co. KG
Entered 8/10
35282 Rauschenberg Germany
Tel / phone + 49 (0)6425 / 8168 – 050
Fax / fax + 49 (0)6425 / 8168 – 10
infofasw-motech.com www.sw-
motech.com
errors and omissions excepted. Technical and design modifications are subject
to change.
PARTS LIST
Schritt Step| Nr.
No.| Art.-Nr. / Bezeichnung
Item No. / Description| Artikel| Part| Anzahl
Quantity”| **Nm *
---|---|---|---|---|---|---
| | BC.HTA.00.677.10000L/B| URBAN ABS Seitenkoffer links| URBAN
ABS side case left| 1/1|
1| 1| BC.HTA.00.677.10000L/B| URBAN ABS Seitenkoffer links| URBAN ABS
Side Case left| 1/1|
2| 2| BC.LOC.00.001.10200/B| Motorradtaschen-Schloss| Lock for Motorcycle
Luggage| 1/1|
3| 3| BC.ZUB.00.064.30000| Wasserdichte Innentasche| Waterproof Inner Bag| |
| | BC.HTA.00.677.10000R/B case right| URBAN ABS Seitenkoffer
rechts| **URBAN ABS side case right| |
1| 1| BC.HTA.00.677.10000R/B| URBAN ABS Seitenkoffer rechts| URBAN ABS Side
Case right| 1/1|
2| 2| BC.LOC.00.001.10200/B| Motorradtaschen-Schloss| Lock for Motorcycle
Luggage| 1/1|
3| 3| BC.ZUB.00.064.30000| Wasserdichte Innentasche| Waterproof Inner Bag|
1/1|
- All measurements in millimeters.
• The second number indicates the total quantity of the part in the delivery.
* No torque specifications: Use the torque defined by the vehicle manufacturer! The standard torque in this table can be used as long as it is within the vehicle manufacturer’s specifications.
CARE
Care To clean the side case, use warm, soapy water and a soft, clean cloth. Rinse with clean water. Do NOT use strong cleaning agents, rough cleaning tools, or a high-pressure washer! Clean the side case after riding in salty conditions, to avoid damage from salt. Hard-to-open zippers can be loosened with a small amount of talcum powder. ATTENTION: Surface materials can experience color changes or fading when exposed to direct sunlight for extended periods of time and by environmental factors (e.g., SMOG, acid rain, etc.)! SW-MOTECH assumes no liability for this.
MOUNTING
Place the three locking openings of the side case onto the guide bolts of the
mounted SLC side carrier. Then press the side case slightly downward, until it
properly rests on the SLC side carrier.
ATTENTION: Make sure that all three guide bolts engage at the same time!
Pay attention to the clearly audible snap sound of the locking mechanism and
that the red marking under the slider is not visible!
To release press the slider downward.
ATTENTION: All components of the side case must not contact any hot or
moving parts of the vehicle! All parts should also remain 5 cm away from hot
parts of the vehicle and remain clear of the exhaust stream! After mounting,
make sure there are no clearance issues while the suspension is both
compressed and extended. 
Open the mounted side case (1) to protect it against theft.
Now press the locking button and turn it according to the arrow mark until the
locking button engages.
Then lock the closed zipper with the included lock (2) We recommend leaving
the locking button in the closed position during the ride. 
Use the included waterproof inner bag (3) to protect your luggage from moisture.
For easier loading of the side case (1), open the buckles and hook and loop
fasteners of the opening reductions, as shown in the drawing.
ATTENTION: Make sure weight is evenly distributed between the left and
right sides if you want to use both side cases! Make sure that the loading is
secured against shifting during the ride!
ATTENTION: Never store pointy or sharp-edged objects, which could cause
injury to persons or damage to the vehicle/side case!
Errors and omissions excepted. Technical and design modifications are subject
to change
Copyright by
SW-MOTECH Gmbh&Co.KG
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>