BONECO P300 Air Purifier Instruction Manual
- June 10, 2024
- BONECO
Table of Contents
- BONECO P300 Air Purifier
- Product Information
- Product Usage Instructions
- SCOPE OF DELIVERY
- TECHNICAL SPECIFICATIONS
- CONTROLS / SETTINGS
- FIRST USE
- AUTO / MANUAL MODE
- NIGHT MODE
- AIR QUALITY
- 24 HOUR TIMER
- CLEANING
- REPLACING THE FILTER
- REPLACING THE UV LAMP
- DISPOSING OF A UV LAMP
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
BONECO P300 Air Purifier
Product Information
The BONECO P300 is an air purifier that is designed to clean the air in your home or office. It has a rated power consumption of 67W and is capable of cleaning up to 170m3/h. The device comes with a filter and a UV lamp that help to remove impurities and bacteria from the air.
Technical Specifications
- Rated power: 67W
- Noise level: 60 dB(A)
- Weight: 4.23 kg
- Air cleaning capacity: 170 m3/h
Controls/Settings
The BONECO P300 air purifier has a simple control panel that allows you to adjust the settings easily. The following are the controls/settings available:
- Set remaining time on timer
- Switch on AUTO mode
- On/off switch
- Night mode on/off
- Regulate the performance
- Clear warning for filter/UV lamp
- Switch UV lamp on/off
- Switch ionizer on/off
- Replace the filter
- Replace the UV lamp
Product Usage Instructions
To use your BONECO P300 air purifier, follow these steps:
- Place the air purifier on a flat, stable surface.
- Plug in the power cord to a power outlet.
- Press the on/off button to turn on the device.
- If desired, set the timer by pressing the timer button and adjusting the remaining time.
- Choose the operating mode by pressing the AUTO mode button or the night mode button.
- To adjust the performance of the air purifier, use the performance regulator.
- If a warning for the filter or UV lamp appears, press the clear button to reset the warning.
- To turn on/off the UV lamp or ionizer, press the corresponding button.
- If the filter or UV lamp needs to be replaced, follow the instructions in the manual to replace them.
Always remember to observe all safety notes included in the delivery to ensure safe and proper usage of your BONECO P300 air purifier.
Always observe all safety notes (included separately in delivery).
www.boneco.com/downloads
These condensed instructions help to save paper. If you require more in-depth
information about the BONECO device, please download the expanded instructions
in PDF format.
SCOPE OF DELIVERY
TECHNICAL SPECIFICATIONS
CONTROLS / SETTINGS
-
Set remaining time on timer
-
Switch on “AUTO” mode
-
On / off switch
Night mode on / off -
Regulate the performance
Clear warning for filter / UV lamp -
Switch UV lamp on/off
-
Switch ionizer on/off
-
Replace the filter
-
Replace the UV lamp
FIRST USE
AUTO / MANUAL MODE
NIGHT MODE
AIR QUALITY
24 HOUR TIMER
CLEANING
REPLACING THE FILTER
REPLACING THE UV LAMP
DISPOSING OF A UV LAMP
Contact your local waste disposal authority to get instructions about
recycling and proper disposal of the old lamp.
Do not throw your used lamp in the house-hold waste. Objects containing
mercury must be disposed of in accordance with the applicable laws and
regulations of your place of residence.
If the UV lamp breaks, switch off the appliance. Do not operate the appliance
with a broken lamp. Do not use a vacuum cleaner to re-move broken pieces.
Sweep the debris into a plastic bag and dispose of it properly.
BONECO is a registered trademark of BONECO AG, Switzerland BONECO AG, Espenstrasse 85, 9443 Widnau, Switzerland
References
- BONECO AG - humidifier, air washer, air purifiers and Air Shower fans - Boneco
- BONECO healthy Air Luftbefeuchter & Luftreiniger Bedienungsanleitungen - Boneco
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>