PXN-P3 Portable Wireless and USB Connection Game Controller User Manual
- June 3, 2024
- PXN
Table of Contents
Product Specification
Overview：
The PXN-P3 Android vibration handle is specially designed to work with Android consoles. Ergonomic design, can bring you a comfortable game experience. Support Bluetooth modes, that the device connection is more convenient, suitable for TV, set-top box and computer.
Functional Characteristics：
2.1 Multi-purpose, support PC, Android smart device, IOS device, host use。
2.2 Dual motor vibration support, has vibration function in PC games。
2.3 The controller supports Bluetooth, USB connection modes。
2.4 Transmission distance: straight line without barrier up to 10 meters。
2.5 There is a reset switch in the rear cover hole of the handle to shut down
directly。
2.6 The controller has a built-in 550mAh lithium battery and intelligent
power-saving technology to provide longer game time。
2.7 PC platform plug – in play X360 games（Game for Windows）。
2.8 The Android platform supports devices with Android 4.0 and above。
product diagram：
3.1 Schematic diagram of front key：
3.2 Side view diagram：
3.3 Schematic drawing of back and receiver：
3.4 Dongle schematic
Function Description:
4.1 On/Off Function:
4.1.1 Power on: Press the [HOME] button for 1 second to display the power
information before the handle starts up. If the handle has been successfully
paired with the host before, the handle will be automatically connected back
to the host after starting up. The mode of the controller after startup is the
mode before shutdown. For example, the Bluetooth mode before shutdown is also
the Bluetooth mode after startup.
4.1.2 Power off: Long press [HOME] for 3 seconds to power off the machine.
Push the reset opening in the small hole of the handle bottom shell with a
small hard object
It can also be turned off.
4.2 Connection Method:
4.2.1 Connection of Android HID Bluetooth mode: Open the Bluetooth function of
the device (such as mobile phone or tablet), press the [X] + [HOME] button on
the handle for 3 seconds to start the device, and the No. 3 LED flashes
quickly to enter the Bluetooth mode pairing state. Search the name PXN-P3 on
the device, then click the connection, and the No. 3 LED will be bright after
successful connection.
4.3 IOS Mode (XBOBONE Protocol) Only Supports ios 14.2 and later oss:
4.3.1 When the handle is turned off, short press the MODE key of the handle
for 1 second. After the power information is displayed, short press the MODE
key +Y key of the handle for 3 seconds and the LED1 light flashes for pairing.
4.3.2 Search for “controller” on the Bluetooth Setting screen of the IOS
device. The connection is
successful and the LED1 indicator is always on.
4.5 Wired Connection Mode (PC xinput Mode) :
4.5.1 When the cable is connected, the PC XINPUT mode is used by default, and
the connection is
successful. The LED1 indicator is always on.
4.5.2 Note: LED4 light indicates when wired connection; LED4 light blinds
slowly when charging; LED4 light is steady on when fully charged.
5. Low voltage alarm and charging function:
5.1 When the battery voltage of the handle is 3.6V(± 0.3V), the No. 4 LED
flashes indicating low power, please charge in time.
5.2 When the battery voltage of the handle is lower than 3.5V(± 0.3V), the
handle will automatically shut down.
5.3. When charging, LED No. 4 flashes slowly, charging current: 300mA, LED No.
4 is steady on after full charge.
5.4 The working static current is 21.9mA, and the search current is 22-24mA.
Sleep Patterns:
6.1 When the handle is connected successfully and there is no button or shaft
action for 5 minutes, it will enter the sleep mode.
6.2 When the handle is not connected, it will enter the sleep mode after 1
minute.
6.3 In sleep mode, the power consumption of the controller is 2uA. Short press
the “HOME” button during sleep to wake up.
Reset function:
When the handle operation is abnormal or abnormal, it can be Reset and shut down by pressing the “Reset” key in the small hole on the back of the handle with a small hard object, and then start and connect the operation.
Auxiliary Functions:
8.1 Rocker virtual position adjustment function:
8.1.1 When the handle is connected, press LT+RT+start at the same time without
letting go, and press the cross key to adjust the upper, left and lower three
gears: The upper rocker has high sensitivity, LED1+LED2+LED3 flashes with
strong vibration in the rocker with medium sensitivity, LED1+LED2 flashes with
medium vibration in the rocker with low sensitivity, and LED1 flashes with low
vibration.
8.2 Calibration function:
8.2.1 In the power-on state, press and hold RB+BACK button for 3 seconds, and
when LED # 1, LED # 2 and long LED # 3 and LED # 4 alternate, press the left
trigger (LT) and right trigger (RT) to the end in turn, and then turn the left
3D and right 3D in turn.
8.2.2 Press the right 3D Down +BACK button at the same time, the LED goes off,
and the motor vibration prompts, then the calibration is completed.
8.3 Adjustment of vibration gear:
8.3.1 When the handle is connected, press LT+RT+start at the same time without
letting go, and move the right rocker 3d up and down to adjust the motor
vibration intensity.
8.3.2 Adjustable four-gear: 0(turn off vibration)– 30% (weak)– 70% (medium)–
100% (strong), default 70% (medium) when the handle is powered on
8.3.3 Handle indicator light + vibration feedback when vibration is closed:
LED2/LED3 is off, there is no vibration. When vibration is low: LED1 is bright
and flashing, low vibration is medium: LED1+LED2 is bright and flashing,
medium vibration is strong: LED1+LED2+LED3 flashes a strong vibration.
8.4 The interchange function of left rocker and cross key
8.4.1 When the handle is connected, press LT+RT+start at the same time without
letting go, and press the left rocker down button (L3) to adjust the function
interchange between the left rocker and the cross button. Swap successfully
shake the handle once.
Troubleshooting:
9.1 When the device cannot be started, the built-in battery may be dead.
Please charge the handle for a period of time before starting the device.
9.2 When the handle accidentally crashes or disconnects, please keep the
distance between the handle and the receiver within the valid range and
without obstacles in between
lock, or pull out the receiver and reconnect.
9.3 In case of trigger or 3D head self-illumination or non-return, calibration
is performed according to item 8.2.1.
Attachment: The handle keys correspond to the handle key value tables of each
platform
KEY| PC XINPUT| ANDROID
HID| PS3
---|---|---|---
left joystick| left joystick| left joystick| left joystick
Right joystick| Right joystick| Right joystick| Right joystick
DPAD| DPAD| DPAD| DPAD
A| A| A（| ×
B| B| B（| ○
X| X| X| □
Y| Y| Y| △
LB| LB| LB| L1
LT| LT| LT| L2
L3| LSB| LSB| L3
RB| RB| RB| R1
RT| RT| RT| R2
R3| RSB| RSB| R3
BACK| BACK| BACK| SELECT
START| START| START| START
MODE| XBOX| HOME| PS
Noted：
10.1 Please read the instructions carefully before use.
10.2 Avoid strong vibration. Do not disassemble, refit or repair by yourself.
10.3 Avoid storing in humid, high temperature, soot and other places.
10.4 Avoid water or other liquids entering the inside of the handle, which
will affect the function and service life of the handle.
10.5 There are batteries inside. Do not drop the handle into the fire, it will
explode.
10.6 If you have quality problems or suggestions, please contact the seller or
after-sales staff.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>