PXN-P6 Wireless Gaming Controller User Manual
- June 3, 2024
- PXN
Table of Contents
Wireless Gaming Controller
PXN-P6
Product instruction
Summarize
This product is a wireless controller specially designed for Bluetooth Android devices (smart TV/TV box/mobile phone). It is compatible with IOS/PC platform. The controller has a beautiful appearance and meets the needs of game entertainment functions.
Functional characteristics
2.1 System: PC WIN8/10/11, Android 4.0 or above, IOS14.2 or above.
2.2 Wired and Bluetooth connection modes.
2.3 PC platform with D/X-INPUT dual mode.
2.4 The handle has built-in dual vibration motor, which has vibration
function in PC.
2.5 Built-in lithium battery 550mA/H, charging the handle through USB
TYPE_C data cable.
2.6 Power saving mode. If there is no connection within 1 minute or no
action within 5 minutes after connection, it will go to sleep. Press the HOME
button to wake up.
2.7 IOS supports MFI mode (XBOXONE Controller protocol identifier: Xbox
Wireless Controller).
2.8 RGBLED display: PC X-INPUT/IOS mode green, Android HID red, Android
Direct connection mode /PC D-INPUT mode blue
2.9 The handle contains arrow keys, ABXY keys, BACK, Start, LB, RB, LT,
RT, L3, R3, and HOME keys.
Product diagram：
3.1 Front button function diagram：
3.2 Back and receiver function diagram
Instructions
4.1 Power ON/OFF：
4.1.1 ON： Press the “HOME” button on the handle to power on.
4.1.2 OFF ：Press and hold the “HOME” button for 5 seconds, and the LED
light will turn off.
4.2 Android Bluetooth HID connection：
4.2.1 Press and hold the “X” + “HOME” key of the handle at the same time,
and release the hand when the RGB red light of the handle flashes.
4.2.2 Open Bluetooth search of Android device and click “PXN-P6A” to
pair.
4.2.3 The connection is successful, and the RGB red light of the handle
is always on.
4.3 Android Bluetooth Direct connection:
4.3.1 Press and hold the “A” + “HOME” key of the handle at the same time,
and release the hand when the RGB blue light of the handle flashes.
4.3.2 Open Bluetooth search of Android device and click “PXN-P6a” to
pair.
4.3.3 The connection is successful, and the RGB blue light of the handle
is always on.
4.4 Bluetooth IOS Connection:
4.4.1 Press and hold the “B” + “HOME” key of the handle at the same time,
and release the hand when the RGB green light flash on the handle.
4.4.2 Open Bluetooth search of Android device and click “PXN-P6M” to
pair.
4.4.3 The connection is successful, and the RGB green light of the handle
is always on.
4.5 PC Receiver Connection:
4.5.1 Insert the Nano receiver into the USB port of your computer,
4.5.2 Long press the “START+HOME” button for 3 seconds when the
controller is off, and the white light of the controller flashes.
The green LED is always bright after successful connection.
4.5.3 In PC belongs to X-INPUT mode key value.
4.6 PC Wired Connection:
4.6.1 Connect the handle to the computer with a USB cable, and the handle
will be automatically recognized as Xinput mode.
4.6.2. The RGB green light of the connected handle is always on.
4.6.3 Because the data cable is used, the handle will be charged, so the
cable is connected to the computer.
The green light blinks slowly.
Functional description
5.1 Reset Function:
When the handle appears dysfunctional, crash or other abnormalities, you can
press the switch in the back reset hole of the handle, the opponent
The handle is reset and shut down, and then press “HOME” button on the handle
to restart the connection and pairing.
5.2 Description of Special Functions:
5.2.1 Low power: The red LED flashes when the battery voltage is lower
than 3.7V, and turns off when the battery voltage is lower than 3.5V
The handle
5.2.2 Sleep: the handle is not connected within 1 minute and enters the
sleep state; When the handle is in working condition, it will go to sleep for
5 minutes without any button or axis action; In the sleep state, press the
“HOME” key to wake up, and automatically connect back to the mode before
shutdown. The sleep current is less than 50uA.
5.2.3 Charging: Charging voltage :USB5V. The handle can be charged
through USB ports such as mobile phone charger, computer and TV.
The handle should be fully charged for 2-3 hours.
Charging indication: The mobile phone charger will flash with white light
(change to red light after one minute), and the computer will flash with green
light when it is full The lights go out.
5.2.4 Calibration function: Press the HOME button once when the
controller is off, and press the BACK+RB key (RGB) at the same time after the
controller is turned on The light will shine alternately. Press the left
trigger, the right trigger, the left rocker, the right rocker several times,
andpress BACK+ right at the same time
Press down the rocker to exit the calibration, and the RGB light goes out.
Elimination of problems
6.1 When the device cannot be started, the built-in battery may be dead.
Please charge the handle with a USB cable.
6.2 In case of accidental crash or disconnection of the handle, keep the
distance between the handle and the device not too far and reconnect.
ATTENTIONS：
7.1 Avoid strong vibration. Do not disassemble, modify or repair by
yourself.
7.2 Avoid storing in humid, high temperature, lampblack and other places.
7.3 Avoid water or other liquids entering the handle, which may affect
the function of the handle.
7.4 There is a battery inside, please do not fall the handle into the
fire, it may explode.
7.5 The charging voltage of this product shall be USB4.5-5.5V DC power
supply, otherwise it may not be charged or the product may be damaged.
7.6 If not in use, press and hold the “HOME” button for 3 seconds to
close the handle.
7. 7 Children should use the product under the supervision of an
adult.
7.8 If you have any quality problems or suggestions, please contact the
seller or after-sales personnel.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>