ESI U22 XT Professional 24-Bit USB Audio Interface Instructions
- June 1, 2024
- ESi
Table of Contents
ESI U22 XT Professional 24-Bit USB Audio Interface
Specifications
- Product Name: U22 XT
- Operating System Compatibilit y: Windows 10 (32- or 64-bit), Windows Vista, Windows 7, Windows 8, Windows 8.1
- Driver File Format : .exe
- Release Date : 2016-01-31
Product Usage Instructions
Preparation
- Disconnect the U22 XT from the computer if connected via USB.
- Download and unzip the driver file needed for installation.
Installation
- Launch the setup program by double-clicking on the .exe file inside the driver download.
- Follow the on-screen instructions, allowing any security messages that may appear.
- Click “Next” when prompted and proceed with the installation process.
- After completion, click “Finish” to finalize the installation.
Uninstallation
If you need to uninstall the driver in the future:
- For Windows 10: Go to Settings > System > Apps & features.
- For previous Windows versions: Navigate to the list of installed Programs in the Windows Control Panel.
- Locate the driver and remove it from the system.
FAQ
- Q : How can I confirm the successful installation of the U22 XT driver?
- A : After completing the installation process, you should see a dialogue confirming the successful installation. Additionally, you can check the device manager to ensure the driver is properly installed.
- Q: Can I use the U22 XT with Mac operating systems?
- A: The U22 XT is designed for Windows operating systems. For Mac compatibility, consider checking for specific drivers or alternatives designed for macOS.
Introduction
This text describes how to install the U22 XT driver under Windows 10 (32- or 64-bit). The process is virtually the same for Windows Vista, Windows 7, Windows 8 and Windows 8.1.
Preparation
If U22 XT is connected to your computer with the USB cable, disconnect it now. You will need to connect it again later during the installation. Make sure that you have downloaded and unzipped the driver file with the driver you are about to install.
Installation
To start the installation, launch the setup program, which is a .exe file that is inside the driver download, by double-clicking on it. Typically the filename is something like U22_XT_vX.YY_setup.exe where X.YY is the version number of the driver. When launching the installer, Windows might display a security message. Make sure to allow the installation. After that, the following dialogue will appear:
Click Next and then the following dialog will appear
Now click Install. Files are now being copied. After some time an additional dialog will appear:
Confirm this by clicking Next. Again some files are being copied and typically you will be prompted with a Windows Security message like this
Confirm it by clicking Install. After a while the installation then will be completed and the following dialog will appear:
Once you see this, click Finish. In many cases, the following dialogue will appear
We strongly suggest selecting Yes, restart the computer now and then click
Finish. You can connect U22 XT to your computer anytime if not done yet.
Windows will automatically set up the system so you can use the device. Once
the system starts again and you are logged in with the hardware connected, you
will see by looking at the ESI icon in the taskbar notification, that the U22
XT control panel is now automatically being loaded. If you can see it, the
driver installation has been completed successfully.
Uninstallation
In case you need to uninstall the driver at a later time, you will find it
under Settings > System > Apps & features (under Windows 10) or in the list of
installed Programs in Windows Control Panel (with previous Windows versions).
You can simply remove it there.