kibri 38544 Historical Petrol Station ARAL Incl LED Lighting Instruction Manual
- June 13, 2024
- kibri
Table of Contents
kibri 38544 Historical Petrol Station ARAL Incl LED Lighting Instruction
Manual
Important information
Please observe the correct sequence when assembling the parts to sub- assemblies and to the completed product!
Safety information
Caution:
Risk of injury!
Due to the finely detailed reproduction of the original and the intended use,
this product may have sharp points or edges as well as parts that may easily
break off. Some tools are required for assembly.
Electrical hazard!
parts to sub-assemblies and to the completed product! Never put the connecting
wires into a power socket! Regularly examine the transformer for damage. In
case of any damage, do not use the transformer!
Assembly
Carefully separate the parts required for the respective assembly phase with a
side cutter or a sharp utility knife from the injection-moulded sprue and
deflash the edges.
Since some sprues are used for several different products it is quite possibly that some parts may not be needed for this particular product.
The contents of this kit have been carefully checked against the parts list. However, should a part be missing please contact us by e-mail or by sending a letter. Please state the precise product description and the item-No. as well as the No. of the sprue and the specific part that is missing. You will find all necessary information in this manual. We will promptly supply the missing parts.
You will find suitable glue for the kits in the kibri product range.
The high-resolution master copy for all kind of signs in your kibri kit are available as download for free. Deco sheets can be printed by using a standard colour printer. Suitable paper or foil for the respective printers are offered by specialized trade. Best way is to use self-adhesive smooth papers or foil with low material thickness.
Print – cut – stick – ready!
Catalogues by Viessmann and kibri/Vollmer can be ordered alternatively via internet. Please follow the link or use QR-code.
Contents
Check the contents of the package for completeness after unpacking:
- Sticker 437
- 2 preassembled LED strip with connection cable
- 2 preassembled LED with connection cable
- 1 ARAL sign with preassembled LED lighting and connection cables
- 10 cm hose
- Manual
| Teile-Nr | Stück | Teile-Nr | Stück | Teile-Nr | Stück |
|---|---|---|---|---|---|
| G220 | 1 | G243 | 1 | G270 | 12 |
| G221 | 1 | G244 | 1 | G271 | 8 |
| G272 | 4 | ||||
| G222 | 1 | G245 | 1 | G273 | 4 |
| G223 | 1 | G246 | 1 | G274 | 2 |
| G224 | 1 | G247 | 1 | G275 | 1 |
| G225 | 1 | G248 | 1 | ||
| G226 | 1 | G249 | 1 | G276 | 1 |
| G227 | 1 | G250 | 1 | G277 | 1 |
| G228 | 1 | G251 | 1 | G278 | 1 |
| G279 | 1 | ||||
| G229 | 1 | G252 | 1 | G280 | 2 |
| G230 | 1 | G253 | 1 | G281 | 2 |
| G231 | 1 | G258 | 2 | G282 | 1 |
| G232 | 1 | G259 | 1 | ||
| G233 | 1 | G260 | 1 | G281 | 3 |
| G234 | 1 | G261 | 1 | G282 | 2 |
| G235 | 1 | ||||
| G236 | 1 | G263 | 2 | Z498 | 1 |
| G237 | 1 | G264 | 4 | Z501 | 2 |
| G238 | 1 | G265 | 1 | Z502 | 1 |
| G239 | 1 | G266 | 1 | Z503 | 1 |
| G240 | 1 | G267 | 1 | Z504 | 1 |
| G241 | 1 | G268 | 1 | ||
| G242 | 1 | G269 | 2 |
Mounting
LED lighting Mounting of
- Drill a hole (Ø 4 mm) at the mounting place.
- Put the patented base socket into the hole and put the cables from outside through the hole.
- Put the mast into the base socket.
Einbau der LED-Beleuchtung
Connection of LED
Power supply: 10-16 V AC ~ (with and without Viessmann power module 5215/5205) 14-24 V DC = 13 24 V Digital signal
Caution :
Make sure that the power supply is switched off when you mount the device and connect the cables! 13 – 24 V Digital signal Only use VDE/EN tested special model train transformers (e. g. Viessmann item 5200) for the power supply! The power sources must be protected to prevent the risk of burning cables.
Resistor and diode at the cables are needed for proper function of the lamp. Never cut them off! Never cover resistor or diode with insulation material, because they have to be cooled by surrounding air!
Connect the LED to the light output of a model train transformer (e. g. Viessmann item 5200).
DC voltage: Connect the diode (red part with black marking) with the positive pole of the transformer, the resistor with the negative pole
AC voltage: While operation with AC voltage it may flicker slightly.
Therefore, we recommend to use the Viessmann power module with distribution strip item 5205 (fig. 1). The distribution strip on the top allows a comfortable connec- tion of 12 loads without soldering, just by plugging the leads of the resistors and the diodes into the sockets of the distribution strip.
Plug the connection cable with the diode into an output socket of the brown connection rail, the connection cable with the resistor into an output socket of the yellow connection rail on top of the power module.
For easy on-off switching of the lighting use an on-off switch (e. g.
Viessmann item 5550).
Die aktuelle Version der Anleitung finden Sie auf der kibri-Homepage unter
der Artikelnummer.
You will find the latest version of the manual on the kibri website using the
item-No
Do not dispose this product through (unsorted) general trash, but supply it to the recycling.
Viessmann Modelltechnik GmbH
Bahnhofstraße
2a D-35116
Hatzfeld-Reddighausen
[email protected]
+49 6452 9340-0
www.viessmann-modell.de
Made in Europe
Schwierigkeitsgrad der Bausätze:
Level of difficulty
Einsteiger
Learners
Profis
Professionals
81239
Stand 03/sw
03/2022
SzT
