PXN X2 TWS Gaming Headset User Manual
- June 5, 2024
- PXN
Table of Contents
PXN X2 TWS Gaming Headset
PRODUCT OVERVIEW
WEARING METHOD
- Step 1 Choose the silicone ear caps that suit your earphones.
- Step 2 Insert the earphone into your ear canal and turn it gently to find a comfortable and fixed position for you.
POWER ON & OFF
- Step 1 Open the charging box and the headphones will automatically turn on.
- Step 2 Put the headphones into the charging box and close the box to turn off.
WIRELESS PAIRING
- Step 1 Open the charging box, the headphones (L/R) will automaticaly enter the inter-matching state, the LED indicator (Red /Blue) flashes alternately, and the headphones will enter the Pairing Mode at this time.
- Step 2 Find “TWS Game headset” in the pairing list of mobile phone. After the connection is successful, the headphones will prompt “Audio connected”.
Re-connect Mode
- When the TWS Game headset is connected for the second time, you only need to open the charging box, and the headphones (L/R) will automatically connect back to the device.
- If there is no automatic connection, please select “TWS Game headset” in the pairing list of mobile device to connect.
Mono Mode
Use in mono mode. After the TWS Game headset is successfully paired, the headphones (L/ R) can be used alone
PAIR WITH OTHER DEVICES
- Step 1 Put the headphones (L/R) into the charging box and keep it open. Long press the Reset Button at the bottom of the charging box for 5 seconds to clear the pairing record. Then the Red/ Blue LED indicator wil fash 3 times quickly to enter the pairing mode.
- Step 2 Find “TWS Game headset” in the pairing list of mobile phones. After the connection is successful, the headphones will prompt “Audio connected”.
RESET
If the headphone (L/R) is not paired successfully or cannot be paired with the devices, please follow the steps below to reset the headphones.
- Step 1 Put the headphones in the charging box and make sure it is in charge.
- Step 2 Press the Reset Button at the bottom of the charging box for 6 seconds, the blue light will flash 3times quickly. Then the Red /Blue LED indicator wil fash alternately. After entering the headphone pairing mode, the reset is complete.
POWER CHARGING
TWS Game headset is equipped with a charging box, USB -C charging cable, and wireless charger. There is a rechargeable battery in the charging box, which can charge the headphones 3 times.
Charging box + Wireless charger (USB -C charging cable)
- Step 1 Put the headphones into the charging box and dose the charging box,
- Step 2 Use the included USB -C cable to connect the charging case to the power source. Or place the charging box in the center of the wireless charger to perform wireless charging.
- Step 3 If you need to check the power level of the charging box, please open it to check the power level of the LED indicator.
Headphone charging
Step 1 Put the headphones into the corresponding card sot of the charging box,
and ensure that the headphones can touch the metal piece of the card sot.
Step 2 The Red light is on when the headphones start to charge. The white
light goes out when the headphones are fully charged.
CONTROL
APP
Download the PXN Audio APP to experience custom interactive operations. (Volume control, playback control, voice assistant activation, custom Personal sound effects, switch environment mode, etc.)
PRODUCT SPECIFICATIONS
WARRANTY REGULATIONS
- We will begin to guarantee the product when the original purchaser purchases it for a period of 12 months, and the warranty is limited to manufacturing defects.
- Please scan the QR code to view the detaied manual in PDF.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>