PXN Sense Elf S2 True Wireless Gaming Earbuds User Manual
- June 4, 2024
- PXN
Table of Contents
PXN Sense Elf S2 True Wireless Gaming Earbuds
Overview & Package Contents
Package contents includes PXN Sense Elf S2 Earbuds, 3 sizes of earbuds tips ( M size tips ar1e installed in the earbuds ) USB-C cable and user manual
|
|
---|---|---
Download the APP ”PXN Audio” in Apple APP Store or Play Store on Android to
exp,erience custom interactive, operations. (Volume control, playback
control,, voice assistant activation … )|
Scan to downloading the browser
Auto Power ON & OFF
- Open the charging case and the earbuds wm power ON automatically.
- Put the earbuds baiek to the charging case and close the case, the earbuds will power ,OFF and enter the charging state.
- If no connection to any smart device for more than 3 seconds after removing the earbuds from the charging case, the earbuds will power ,OFF automatically
Manual Power ON & OFF
- Under power OFF state, long press the touch senor area on the L & IR earbuds simultaneously for 3 seconds to power ON. (Voice guidance: Power ON.)
- Under power OFF state, long press the touch senor area on the L & IR eanbuds simultaneously for 5 seconds to power ON. (Voice guidance: Power OFF.)
Connect Smart Device In Dual Earbud Mode
- For the firat use. the earbuds Indicator ‘will keep on Wh1t9 for 2 seconds after removing from the charging case. (Voice guidance: Power ON.) L & R earbuds will pair automatically (Voice guidance: Beep.) After successful pairing, the White and Blue indicator will flash alternately and enter the Bluetooth Search state. (Voice guidance: Pairing.) Now car, connect with the smen device.
- Open the Bluetooth on the :smart device and search “PXN Sense Elf S2” to pair. The earbuds will be paired with the smart device successfully. (Voice guidence: Connected.)
Connect Smart Device in Mono Earbud Mode
- Remove the L / R aarbuds from the charging case and pair-it according to the above dual earbud mod& to complete ‘the connection.
Auto-Reconnection
- Open the charging case, and the earbuds will automatically connect back to the last successfully connected smart device.
- The earbuds will be disconnected with the smart device when they are beyond the effective distance.
(Voice guidance: Disconnected.) Return to the, effective distance within 3 minutes, the earbuds and smart device wm reconnect automatically.
TWS Pairing Connection of L & R Earbuds
When the earbuds leave the factory, the L & R earbuds have successfully completed TWS pairing under normal conditions., and the earbuds. can be used normally after connecting with the smart device.
If you need to re-pair under special circumstances,, please follow these steps:
- Double click the earbuds simultaneously when L & R earbuds, enter to the search state., The White indicator on the earbuds will enter the breathing flash state and start to pair.
- The indicator ian the earbuds with flash in White and Blue altennately after successful pairing.
(Voice guidance: Beep.) Now can connect with the smart device.
Indicator State
Eerbuds Mode| Play Mode| Game Mode| Music Mode| Standby Mode| Incoming call
Mode
---|---|---|---|---|---
Indicator State| Blue/White light Breathing cycle flashing| Blue light
flashes| White light flashes| Blue/White light flashes 4s/time(under Game
mode/Music mode)| White light flashes quickly
Function| Touch Operation Instruction| Gesture
---|---|---
Play/Pause| Click 2 times (L/R)| Double- click L/R
Volume| Click 1 time (L- /R+)| Single-click L- /R+
Previous song| Hold press for 2s (L)| Hold press for 2s (L)
Next song| Hold press for 2s (R)| Hold press for 2s {R)
Answer a call
End call| Click 2 times (L/R)
Two- way voice| Double- click L/R
Reject call| Hold press for 2s (L/R)| Hold press for 2s
Game mode| Click 3 times (R) (Voice guidance: Game Mode)| Click 3 times (R)
Music mode| Click 3, times (R) (Voice guidance: Music Mode)
Activate voice assistant 0N/OFF| Click 3 times (L)| Click 3 times (L)
Earbuds R1 GB, mode ON/OFF| Click 4 times (L/R)| Click 4 times (L/R)
Charging
When using the charging case for charging at the first time, ple-ase put the earbudls back into the charging cas,e and close the cover .. Use the data cable included with this product to connect to the power supply for charging.
Earbuds Charging| Put the earbuds into the charging case and close the cover
for charging| When the earbuds are charging,, the white indicator on the
earbuds will remain on for 3 seconds and then the indicator will be off
gradually. After fully charged, the corresponding RG 8 White Light will remain
ON for 3 second and then OFF.
---|---|---
Charging Case Charging| Use the USB-C cable included for charging| During
charging, L/R indicator ls red breathing flashing. When fully charged, L/R
indicator will remain Green for 1 minute and then OFF
Restore Factory Settings (Operate with Caution)
Restoring the factory settings will clear all pairing information of the earbuds.
- Under Power OFF state, long press the touch sensor area for 1 0 seconds until the earbuds are t urned off again. After the restoring is completed, the Blue indicator on the earbuds will remain ON for 2 seconds and power OFF.
- Please follow the steps in “TWS Pairing ,connection of L & R Earbuds” to complete the TWS pairing and the connection of smart devices again ..
Q: No sound can be heard through the, earbuds.?
A : a. Make sure the earbuds are under working state.
b. Confirm whether the volume of the earbuds is appropriate.
c. Check if the earbudls are connected successfully with the phone.
d. Make sure the e,arbuds are itn the norm,al working range.
e. Confirm whether there is foreign ma1tter blocking at the position of
earbuds horn net.
Q: Bad signal in call when using the earbuds?
A· a. Confirm whether the smart device 1s in the area with strong signal
b .. The effective distance of the earbuds ls 10m, please make sure that the
earbuds are within the effective distance and there is no obstacle between the
earbuds and the smart device.
Q: Unable to pause, resume, previous song and next song control when using
the earbuds to play music?
A : This, function requires that the device paired with the earbuds supports
the AVRCP protocol. (Audio/Video Remote Control Pronle.)
Product Specifications
| Product Name | PXN Sense Elf S2 |
|---|---|
| Connection | Wireless connection |
| Input | DC 5V === 1A |
| Frequency Response | 20HZ – 20KHZ |
| Maximum Wireless Range | 10 m (Barrier-free) |
| Battery Life | About 5 hours |
| Charging Method | About 1 .5 hours (earbuds charging) |
About 2 hours (charging case + USB-C cable charging)
Product Size| About 61.5 61.4 32 mm (charging case)
Attention
- Avoid placing in humid, high t,emperature or soot place.
- Prevent water or other liquids from entering the inside of the earbuds,.
- Avoid using the earbuds at a high volume for a long time. If tinnitus or earache occurs, please stop using
- If you have any problems or suggestions about the product, please contact the seller or the after-services.
- Warning:. The rechargeable b,attery of this product must be disposed of properly for recycling, please do not put the battery into the fire, to avoid cause an explosion.
- Advise: If not use the earbuds for a long time, please store it in a dry place.
The earbuds need to be charged at least once a month to extend the battery life.
FCC Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Please read the manual carefully before using, and keep this manual for future reference
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>