Baseus True Wireless Earphones Bowie W15 Pairing Manual

June 28, 2024
Baseus

Baseus True Wireless Earphones Bowie W15 Pairing Manual

Please read the manual carefully before using the product and keep it with proper care.

Connection Steps

  1. Turn on
    The earphones automatically turn on after opening the lid of the charging case and taking them out.Baseus-True-Wireless-Earphones-Bowie-W15-Pairing-fig-
\(1\)

  2. Wireless connection
    Turn on the phone wireless to search and pair the earphones.

  3. Select model
    Baseus Bowie W15, and click Connect.Baseus-True-Wireless-Earphones-Bowie-W15
-Pairing-fig- \(3\)

  4. Turn off
    Put the earphones into the charging case and close the lid to turn off the earphones.

Function Operation

Music mode

  • Play/Pause: Double-click left or right earphone (L or R)
  • Next song: Long press the right earphone K1.5 seconds
  • Previous song: Long press the left earphone 1.5seconds
  • Previous song: Long press the left earphone 1.5secondsBaseus-True-Wireless-Earphones-Bowie-W15-Pairing-fig- \(10\)

Activate voice assistant (Siri)
Triple-click left or right earphone (L or R)

Call mode

  • Answer/ Hang up: Double-click left or right earphone (L or R)
  • Reject a call: Long press 1.5 seconds left or right earphone (L or R)

Charging Status Indicator Light

Baseus-True-Wireless-Earphones-Bowie-W15-Pairing-fig-
\(14\)

Charging case charging earphones
During charging, the indicator light turns on in red for 4 seconds and turns off.

Baseus-True-Wireless-Earphones-Bowie-W15-Pairing-fig-
\(15\)

Charging the charging case
The indicator light flashes in white during charging and stays in white after it is fully charged.

Restore factory settings

First, turn off the wireless of nearby cell phones. In the pairing state, open the lid to take out both earphones and triple-tap the left and right earphones to restore factory settings. Then put the earphones back into the charging case, and take them out again. Lastly, turn on the wireless of the cell phone to search and connect the earphones.

Declaration on hazardous substances and elements contained in electronic products

Baseus-True-Wireless-Earphones-Bowie-W15-Pairing-fig-
\(18\)

This form is compiled by SJ/T 11364.
0: It indicates that the content of the harmful substance in all homogeneous materials of the component is below the limit specified in the GB/T 26572 standard.
X: The content of harmful substances in at least one homogeneous material of this part exceeds the limit stipulated in the GB/T 26572 standard.

This product complies with the EU RoHS 2.0 Directive (2011/65/EU)
Warm Tip: The 5-year icon refers to the “effective life of environmental protection”, not the product quality assurance period. Electronic products all contain harmful substances such as lead, mercury and cadmium. Once they are overused, harmful substances may leak or mutate, cause pollution to the environment, or cause serious damage to people and property. The term “environmental protection use” means that all electronic products will be required to be used within this effective period. We will no longer be responsible for the quality of the products due to the safety risks that arise after the safe use period.

Product safety information
Please read all instructions and warnings before using this product. Non- standard use will damage the product or personal safety.

  • The battery is included in the product. Please do not expose it to sunlight, electric heater or similar overheating. Do not store the product in high temperature, strong light and strong magnetic field. Do not place it in other harsh environments such as fire sources. If water enters, dry it naturally and use it again. Improper use of the product can easily cause damage to the product or may endanger personal and property safety.
  • Consumers shall be liable for any personal and property damage resulting from their improper use of the user manual or ignoring the warning, to which our company will not bear any legal liability.
  • Disintegration of this product by non-professionals is strictly prohibited.
  • Loads (appliances) over the output current of this product shall be avoided. A circuit protection mechanism is built-in to automatically stop working if loads exceed.
  • Intense physical actions including knocking, throwing, trampling on and squeezing, etc. shall be avoided.
  • The ambient temperature of the product is 0-45°C.
  • Please use a clean cotton cloth to clean the charging contacts of earphones regularly to prevent the earphones from failing to charge or turn on due to failing to clean for a long time.
  • If the earphones are damaged or can not be turned on because consumers get them wet, for example, consumers leave the earphones in the washing machine by mistake. The responsibility needs to be borne by the consumer, and our company will no longer provide after-sales service for returns and refunds.
    Note: Please refer to the detailed product introduction for the waterproof level.

Product Parameters

  • Name: Baseus True Wireless Earphones
  • Model No.: Baseus Bowie W15
  • Earphone rated input: DC5V= 35mA
  • Material: ABS+PC|
  • Charging case rated input: DC5V= 330mA
  • Version: V5.2
  • Communication distance: 10m
  • Earphone-rated consumption current: 8mA
  • Charging case rated current consumption: 130mA
  • Music time: 5 hours (70% of the volume)
  • Charging time: 1.5 hours
  • Music time with a charging case: 20-25hours
  • Frequency response range: 20Hz-20kHz
  • Battery capacity: 35mAh/0.13Wh (earphones)
  • Charge interface: Type-C
  • 330mAh/1.22Wh (charging case)
  • Suitable for: Compatible with all wireless devices

The above data are measured by the Baseus laboratory, the actual use will be slightly different depending on the specific circumstances.

Packing List

Baseus-True-Wireless-Earphones-Bowie-W15-Pairing-fig-
\(19\)

FAQS

The mobile phone cannot find the Bluetooth headphones, and the Bluetooth connection is unstable or disconnected during use, thus resulting in unsmooth sound/ interruption.

  1. A: 1) Please do not exceed the Wireless connection distance of the mobile phone, to avoid interference from the wall or the human body.
  2. Please make sure the earphone has enough power, and re-enter the pairing mode to connect.
  3. If the earphones can not be connected after the above steps, please put the earphones back into the charging case, manually ignore the phone’s wireless device turn off the wireless, and restore factory settings before reconnection.
  4. Due to the property of the Wireless earphone, the electromagnetic waves in your area may interfere with the Wireless connection, resulting in sound problems or disconnection, please stay away from such areas before connecting.

Why the earphones cannot be turned on/off?

  1. A: 1) Make sure that the charging case and the earphones have battery left, open the lid of the charging case and the earphones will automatically turn on.
  2. Make sure that the charging case has a battery left, put the earphones back in the charging case, and close the lid to turn off the earphones automatically.
  3. When the charging case is out of battery, please turn off the wireless function on your phone and the earphones will turn off automatically in 5 minutes.
  4. Please keep the charging area of the earphones and the Pogo pin of the charging case clean, and regularly clean them with a dry cloth.

Why is one of my earphones without sound after I take them out?

  1. A: 1) If this problem occurs, please put the earphones into the charging case close the lid, and then take them out.
  2. If the earphones can not be returned to normal after the above steps, please put the earphones back into the charging case, manually ignore the phone’s wireless device turn off wireless, and restore factory settings before reconnection.

Why is the touch function not sensitive?

  1. A: 1) Make sure that the functional area of the earphones is clean and water-free.
  2. Make sure that the fingers to touch the earphones are without water or other foreign objects.
  3. Make sure that the touch position is correct, and complete the quick double-click or triple-click operation within 0.5s.
  4. If the earphones can not be returned to normal after the above steps, please put the earphones back in the charging case, manually ignore the phone’s wireless device turn off wireless, and restore factory settings before reconnection.

How to burn in the earphones for better sound quality?

  1. A: 1) (softer music) Play music at one-third of normal volume for 12 hours.
  2. (any music except for typical rock music) Play music at two-thirds of normal volume for 12 hours.
  3. (your favourite music) Play music at normal volume for 72 hours.
  4. (your favourite music) Play music at three-fourths of normal volume for 24 hours.

This equipment complies with the provisions of Directive 2012/19/EU, 2006/66/EU. It is strictly forbidden to dispose of this equipment with ordinary trash; it must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment.

It is hereby declared that Baseus Bowie W15, a product model of Shenzhen Times Innovation Technology Co., Ltd. complies with the provisions of Directive 2014/53/EU and Directive 2011/65/EU. The full text of the EC Declaration of Conformity can be found on the following website: www.baseus.com

Warning
Please follow the above safety instructions otherwise it will cause fire, electric shock, damage or other damage.

Manufacturer: Shenzhen Times Innovation Technology Co., Ltd.
Add: 5th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,
Gangtou Community, Bantian Street, Longgang District, Shenzhen
Hotline: +86-4000-712-711 Website: www.baseus.com

Download PDF:Baseus True Wireless Earphones Bowie W15 Pairing Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals