LOREX N19 Series 4K Fusion Wired NVR System User Guide

June 3, 2024
Lorex

LOREX-LOGO

LOREX N19 Series 4K Fusion Wired NVR System

LOREX-N19-Series-4K-Fusion-Wired-NVR-S-PRODUCT

Package Contents

LOREX-N19-Series-4K-Fusion-Wired-NVR-S-FIG-1

Overview

Front

LOREX-N19-Series-4K-Fusion-Wired-NVR-S-FIG-2

  1. Hard Drive LED

  2. Power LED

  3. Network LED

  4. USB Ports

  5. Info/Panic Button
    BackLOREX-N19-Series-4K-Fusion-Wired-NVR-S-FIG-3

  6. Power Port

  7. PoE Ports

  8. LAN Port

  9. VGA Port

  10. Audio In/Out

  11. HDMI Port

Test your cameras prior to selecting a permanent mounting location.

Wired Option 1

Connect your wired camera
Connect your camera directly to your recorder’s PoE port using the Ethernet extension cable.

LOREX-N19-Series-4K-Fusion-Wired-NVR-S-FIG-4

Connect your wired camera
Connect your camera to a PoE switch on your network using the Ethernet extension cable. Ensure your switch is connected to the same network as your recorder

LOREX-N19-Series-4K-Fusion-Wired-NVR-S-FIG-5

Connect to your network
Connect your recorder to your Wi-Fi router using the included Ethernet cable.

LOREX-N19-Series-4K-Fusion-Wired-NVR-S-FIG-6

Connect your mouse
Connect the included USB mouse to the USB port on your recorder. To copy events or to perform a firmware update, connect a USB flash drive.

LOREX-N19-Series-4K-Fusion-Wired-NVR-S-FIG-7

Connect to your TV:
Connect your recorder to your TV using the included HDMI cable. The HDMI supports up to 4K resolution and VGA supports up to 1080p.

LOREX-N19-Series-4K-Fusion-Wired-NVR-S-FIG-8

Connect your power adapter:
Connect the included power adapter to your recorder and a power outlet. Once your recorder has powered on, complete the Lorex Setup Wizard

LOREX-N19-Series-4K-Fusion-Wired-NVR-S-FIG-9

Download the Lorex Home App

To enable remote viewing with mobile apps, you will need to:

  • Have high-speed Internet
  • Have an upload speed of 6Mbps for one 4K channel and at least 20Mbps for the whole system
  • Find your recorder’s Device ID

To connect your recorder to the app

  1. Download
  2. In the app tap + to add your recorder
  3. Follow the in-app steps to complete the setup

Fusion Setup

Connect your Wi-Fi device to your recorder:
Set up your recorder and wired cameras. Next, download the Lorex Home app and add your recorder and Wi-Fi device. From your recorder, navigate to the camera’s setup page and scan your network to connect your Wi-Fi device. To learn more or get support, scan the QR code or visit

lorex.com/fusion

Need Help

For up-to-date information and resources, scan the QR code or visit:

help.lorex.com

  • Download your recorder’s manual
  • Watch how-to-videos
  • Find related troubleshooting tips & FAQs

Register Your Product

Please see our full Terms of Service and Limited Hardware Warranty Policy at:

Copyright © 2022 Lorex Technology Inc
As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.

Regulatory Information

IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p) is not more than that necessary for successful communication.

FCC Statement

Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Caution : The user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF exposure warning
This equipment must be installed and operated in accordance with provided instructions and antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The equipment should be installed and operated with a minimum distance 20cm between the radiator and your body. For full FCC compliance declarations, visit https://www.lorex.com/pages/fcc-compliance

Declaration of Conformity UKCA
UK CA This device complies with UKCA relevant directives and standards. UK Declaration of Conformity (DoC) can be downloaded from: https://www.lorex.com/pages/ukca-compliance

Lorex Technology UK Limited 1 Georges Square, Bath Street, Bristol, United Kingdom, BSl 6BA.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals