Allied Telesis GS950 Series Gigabit Ethernet Switches User Guide
- June 13, 2024
- Allied Telesis
Table of Contents
GS950 Series v2.0.8 and 3.0.8
GS950 PS Series v1.0.7 and v3.0.9
Gigabit Ethernet Switches
Software Release Notes
GS950 Series Gigabit Ethernet Switches
Read this document before updating the management software:
- “Supported Platforms,” next
- “Resolved Issues” on page 2
- “Open Issues” on page 2
- “Contacting Allied Telesis” on page 3
Supported Platforms
This firmware release applies to the following GS950 (non-PoE+) and GS950 PS PoE+ Switches:
- GS950/8
- GS950/16
- GS950/24
- GS950/48
- GS950/10PS
- GS950/16PS
- GS950/28PS
- GS950/48PS
Note
The GS950 PS Switches are no longer available for purchase. For alternative
products, refer to the End of Sale Products List on the Allied Telesis
website.
This table lists the new and previous firmware versions.
| Switch | New Firmware Version | Previous Firmware Version |
|---|---|---|
| GS950/8 | 2.0.8 | 2.0.7 |
| GS950/16 | 2.0.8 | 2.0.7 |
| GS950/24 | 2.0.8 | 2.0.7 |
| GS950/48 | 3.0.8 | 3.0.7 |
| GS950/10PS | 3.0.9 | 3.0.8 |
| GS950/16PS | 3.0.9 | 3.0.8 |
| GS950/28PS | 1.0.7 | 1.0.6 |
| GS950/48PS | 3.0.9 | 3.0.8 |
Software upgrade instructions are provided in the following documents at www.alliedtelesis.com/library:
- GS950/8 Web Interface User Guide AT-S113
- GS950/16 Web Interface User Guide AT-S114
- GS950/24 Web Interface User Guide AT-S115
- GS950/48 Web Interface User Guide AT-S116
- GS950/10PS Web Interface User Guide AT-S110
- GS950/16PS Web Interface User Guide AT-S112
- GS950/28PS Web Interface User Guide AT-S126
- GS950/48PS Web Interface User Guide AT-S111
- GS950 PS Series Command line Interface User Guide
Resolved Issues
The following issues were resolved in this release:
- Ports disabled with the Loopback Detection feature were incorrectly displayed in the web browser management interface as linked.
- IGMP snooping worked incorrectly on ports in a port trunk.
Open Issues
The following are open issues:
- The switch might not display the web browser management interface correctly when SSL is enabled. If this happens, close the interface and open it again.
- The switch might not update the Link Status column in the Physical Interface window when you enable or disable a port with Admin Status. To view the correct settings, refresh the window by exiting and returning to it.
- The switch might not correctly update the MAC address tables in the web browser management interface when you delete an active port trunk. To view the correct settings, close the interface and open it again.
- Port mirroring might not work correctly if you mirror multiple 100M ports on a 1G port.
- Storm Control thresholds might be exceeded.
- Traffic with the same CoS priority might be forwarded by the switch at different rates.
Contacting Allied Telesis
For assistance with this product, you may contact Allied Telesis technical
support on the Services & Support section of the Allied Telesis web site at
www.alliedtelesis.com/services.
The site has links to the following services:
- Helpdesk (Support Portal) – Enter our interactive support center to search for answers to your questions in our knowledge database, check support tickets, learn about Return Merchandise Authorizations (RMAs), and contact Allied Telesis technical experts.
- USA and EMEA phone support – Select the phone number that best fits your location and customer type.
- Hardware warranty information – Learn about Allied Telesis warranties and register your product online.
- Replacement Services – Submit an RMA request via our interactive support center.
- Documentation – View the most recent installation and user guides, software release notes, white papers and data sheets for your products.
- Software Downloads – Download the latest software releases for your managed products.
To contact a sales representative or find Allied Telesis office locations, go to www.alliedtelesis.com/contact.
Copyright 2023 Allied Telesis, Inc.
All rights reserved. No part of this publication may be reproduced without
prior written permission from Allied Telesis, Inc. Allied Telesis, Inc. and
the Allied Telesis, Inc. logo are trademarks of Allied Telesis, Incorporated.
All other product names, company names, logos or other designations mentioned
herein are trademarks or registered trademarks of their respective owners.
Allied Telesis, Inc. reserves the right to make changes in specifications and
other information contained in this document without prior written notice. The
information provided herein is subject to change without notice. In no event
shall Allied Telesis, Inc. be liable for any incidental, special, indirect,
or consequential damages whatsoever, including but not limited to lost
profits, arising out of or related to this manual or the information contained
herein, even if Allied Telesis, Inc. has been advised of, known, or should
have known, the possibility of such damages.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>