GD DIGITAL NV3182 Wi-Fi Night Vision Instructions

June 5, 2024
Gd Digital

www.chinaomg.com

NV3182-Wifi Night Vision

OutlookGD DIGITAL NV3182 Wi Fi Night Vision - Main
Image

Model NV3182 WIFI
Highlight •About 250-300 meters view distance in complete darkness

•3 meters-infinity view distance in low light
•2.31″TFT inner screen. with 3X large window magnifier
•960P Video by interpolation
•2.4G WIFI distance 30M by Mobile App
•VGA pixels CMOS
SPEC
Photo Resolution| 1M(1280×960)by interpolation, VGA(640×480)
Video Resolution| 960P(1280×960@30FPS )by interpolation, VGA(640×480@30FPS )
Lens| F1.2 larger aperture, f=25mm, Auto IR filter
Lens Angle| FOV=10°, caliber is 24mm
Display Screen| The inner screen is 2.31″ 960240 TFT LCD.
The outer screen is 98x48mm, with a 3X large window magnifier
WiFi| 2.4G(802.11b/g/n),distance 30M
Storage Media| Micro SD card, up to 32GB
USB Port| Micro USB 2.0
Auto-off| OFF/1 min/ 3 min/ 5 min/ 10 min
IR LED| 3W,850nm strong infrared spotlight, 7 grades infrared adjustment
View Distance In Complete
Darkness| About 250-300 meters
View Distance In Low Light| 3 meters—infinity
Digital Zoom| Digital Zoom 4X
Power Source| 9V: 6
AA
OSD Language| Multiple languages are optional
Date Stamps| Support to set date and time. Date and time stamp on photo and video files.

GD DIGITAL NV3182 Wi Fi Night Vision - Main Image 2

Android APK, apple APP| It supports a mobile APP (Android, 10S) to operate NV remotely through WIFI, preview images and videos in real-time, take photos, record videos, set parameters and manage files, etc.
---|---
Operation Buttons| 6 buttons
Operation Temperature| -20r to +60t
Storage Temperature| -30t to +70t
Dimensions & Weight| approx. 206138’58mm /600g
Accessory| knapsack, USB cable, manual
way to install| Fixed installation and use, is not a portable device when the product is connected to wifi

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance of 20cm from the radiator of your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals