FOR-X XQ-6PP Plug and Play Car Amplifier User Guide
- June 3, 2024
- FOR-X
Table of Contents
FOR-X XQ-6PP Plug and Play Car Amplifier
POWER AMPLIFIER PANEL FUNCTION
- Power supply
- ACC and high level switch selection
- ACC and high level switch selection
- Output of CH5 and CH6 power amplifiers
- CH1 and CH2 Qualcomm frequency adjustment and volume volume
- Low-pass upgrade after bridging between CH5 and Ch6
- CH5 and CH6 Qualcomm and Lowpass Frequency Adjustment
- CH5 and CH6 Qualcomm and Lowpass and full Frequency selection
- CH5and CH6 volume adjustment
- CH3 and CH4 Qualcomm frequency adjustment and volume volume
- 2CH or 4CH low frequency input and output selection
- 4CH low frequency input and output ports
- 4-in-4-output high frequency input and output port
DIAGRAM OF POWER AMPLIFIER INSTALLATION < A >
The connection method of the original car with 4 in and 4 out
DIAGRAM OF POWER AMPLIFIER INSTALLATION < B >
Bridge-driven passive subwoofer connection 4.1 use
DIAGRAM OF POWER AMPLIFIER INSTALLATION < C >
4 in G out with active subwoofer connection/”6.1 use
When the switch is pulled to 2CH, the CH1/CH3 of low-frequency RCA is the
input or output signal of combining frequency, and CH2/CH4 is the input or
output signal of combining frequency. When the switch is pulled to 4CH, CH1 to
CH4 is the independent input and output signal of each channel, and the input
signal of CH5 and CH6 is CH1/CH2! When the high frequency signal is input, the
signal can be taken from the CH1~CH4 of the low frequency RCA to the external
power amplifier or active bass.
SPECIFICATIONS
- POWER SUPPLY 11-15V DC NEG. GROUND
- POWER OUTPUT@40HM POWER OUTPUT@ 20HMM INPUT
- IMPEDANCE 35Wx4+80Wx2 5OWx4+120Wx1 22K OHMS
- S/N RATIO 100 dB 50 dB
- T.H.D. 0.1%
- CHANNEL SEPARATION FREQUENCY
- RESPONSE
- CH1 CH4 HPF 10Hz-50KHz(-3dB) 50 Hz~500Hz
- CH5-CH6 HPF/LPF 50 Hz~500Hz 0~12dB
- CH5-CH6 BASS BOOST
- DIMENSIONS 205×255 x60mm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>