FOR-X XQ-710DSP Digital Media Receiver User Manual

FOR-X XQ-710DSP Digital Media Receiver

Product Information

• Product Name: XQ-710DSP
• Supported Functions: FM Radio, Coaxial Output
• FM Frequency Range Preset:
  • Europe Area: 87.5 ~ 108.0 KHz (50KHz / Step)
  • U.S.A. Area: 87.5 ~ 107.9 KHz (200 KHz / Step)
  • ASIA Area: 87.5 ~ 108.0 KHz (100 KHz / Step)
  • RUSS Area: 65.0 ~ 74.0 KHz (30 KHz / Step)
• Supported Radio Stations: 18 FM / 12 AM
• Measurement Units :
  • Time: Milliseconds (MS)
  • Distance: Centimeters (CM) and Inches (INCH)

Product Usage Instructions

1. To turn on the device, press the SRC button.
2. To navigate through the menu options, use the V+ and V- buttons.
3. To select an option, press the MENU button.
4. To change the radio band, press the BAND button.
5. To access the automatic memory search (AMS) feature, press the AMS button.
6. To set the clock, press the CLK button.
7. To mute the sound, press the MUTE button.
8. To adjust the volume or select a specific function, use the VOL/SEL button.
9. For FM radio, use the SRC button to switch to the radio mode and navigate through the preset frequencies using the V+ and V- buttons.
10. For other supported functions like TF, RST, USB, AUX, refer to the product manual for detailed instructions.

WARNINGS & PRECAUTIONS

• To avoid risk of serious injury or possble violation of laws,please read the following thoroughly before installation or connecting.
• This product is designed specifically for use with 12 volt, negative ground electrical systems only.
• Having the wiring and installation done by expert.
• Be sure to diconnect the cable from the negative battery terminal while installtion.
• This apparatus shall not be exposed to dripping or splashing, and no object filled with liquids,shall be placed on the apparatus.
• Fuses shall be replaced only with the correct type and fuse value,and only when the apparatus is powered off.
• To prevent a short circuit,never put or leave any metallic objects(such as coins or metallic tools)inside the unit.
• Never set the volume of this product so high that you cannot hear outside traffic and emerency vehicles.

PRODUCT FEATURES

• Panel: Fixed
• LCD:VA-LCD
• Key Light: Multi Color
• Bluetooth: Version 5.0
• Bluetooth Music: Support
• DSP: Built-in
• EQ: 28 Band,8 Preset
• Pre-Output: BCH x 4V
• Max Power: 4 x OW
• Xbass: Support
• Xover: Support
• 3D Surround: Support
• 2-Way Network: Support
• 3-Way Network: Support
• Time Alignmnet: 0-18 ms
• Q Value: 1-20
• Subwoofer Control: Support
• Playback Interface: TF&USB
• Phase: 0° -180°
• Listening Bit Setting: Support
• Slope: Support
• PAC™-SWI: Support
• Remote: Support
• Microphone: Built-in and External
• Radio: Preset 18FM, 12AM, RDS
• APP Control: iOS and Android Phone
• Charge: Rear USB 2A
• Audio Format: MP3,WMA,AAC,FLAC,APE

INSTALLATION

Installation Procedures

• First complete the electrical connections and then check for correctness.

Installation Opening

• This unit can be installed in any dashboard Having an opening as shown below:

To Install The Car Radio

Be sure you test all connections first, and then follow these steps to install this unit.

1. Make sure the ignition is turned off, and then disconnect the cable from the vehicle battery’s negative (-) terminal.
2. Disconnect the wire harness and the antenna.
3. Remove the detachable panel and decorative enclosure frame and place on one side.
4. lnsert the two brackets into the left and right sides of the chassis, as shown in the following figure, and separate the chassis from the sleeve.
5. lnsert the installation sleeve into the center console to be installed, and bend the clip using a screwdriver. Make sure the locking rod is flush with the mounting sleeve and does not protrude.
6. Connect cables as shown in the Wiring diagram.
7. lnsert the car radio into the mounting sleeve.
8. lnstall decorative enclosure frame.

ACCESSORY LIST

Please check the following accessories after opening the package:

DIMENSION(UNIT:MM)

WIRING DIAGRAM

BASIC FUNCTIONS OF PANEL KEYS

REMOTE OPERATION

APP OPERATION

APP Download
Please go to the APPLE APP Store or Google Play Store and search [AUDIO DSP Control] APP ,after downloading the APP,install it on your Appale&Android devices.

APP Connection

1. Open the [AUDIO DSP Control] APP, click [H ] to search for XQ-710DSP.
2. Click XQ-710DSP to connect, the [ ] will be red after the connect is successful.

Start Listening

USB &SD PLAYBACK

BLUETOOTH OPERATION

Bluetooth Pairing
The first time pair mobile phone with receiver, please follow below steps:

1. When there is no pairing, in any mode, the BT on the LCD will flash, and the pairing can be performed at this time.
2. Turn on the phone’s Bluetooth to Search XQ-710DSP.
3. Click on the XQ-710DSP on the phone to connect. After the connection is successful, the BT will stop flashing.
4. When pairing is complete the mobile phone audio will automatically transfer to the car audio system whenever a call is made or received, or when the mobile phone plays music.

Note:
For more details of bluetooth pairing,please refer to the owner’s manual for your mobile phone.

Bluetooth Basic Operation

Bluetooth Music Operation

AUX INPUT

1. Connect a portable audio player(commercially available).
   • Auxiliary input jack
   • Auxiliary input jack
   • 3.5mm stereo mini plug with “L”shaped connector. (commercially available).
2. Press[“SRC]buttons to select AUX IN.
3. Turn on the portable audio player and start playback.

EXTERNAL MICROPHONE

Note:
Since the panel microphone is far from the driver’s position, when using an external microphone, you can get better voice calls.

AUDIO SETTINGS

1. Press the knob to enter the [MENU].
2. Turn the knob to select [AUDIO],then press the knob.

Audio Settings List

28BAND : 25HZ/32HZ/40HZ/S0HZ/63HZ/ 80HZ/lO0HZ/l 25HZ/ l60HZ/200HZ/250HZ/3l0HZ/400HZ/500HZ/630HZ/800HZ/lK/

l ,25K/2K/2,5K/4K/5K/6,3K/8K/l0K/l 2,SK/l 6K/20K

XBASS| FREQ OFF/60HZ/80HZ/ l 20HZ/ l 60HZ/200HZ/300HZ
GAIN 0-3
SURROUND| OFF/ON
BASS| BASS -7 – +7
MIDDLE| MIDDLE -7- +7
TREBLE| TREBLE – 7 – +7
AUDIO RST| NO/YES

Subwooter Volume Adjustment

1. Turn the knob to select [SW LEVEL],then press the knob.
2. Turn the knob to adjustment SVOL [ -8 to +8].

Preset EQ Select

1. Turn the knob to select [PRESET EQ ],then press the knob.
2. Turn the knob to select [USER/NATURAL/POP/CLASSIC/ROCK/ JAZZ/FLAT/COUNTRA/SUPER BASS].

User EQ Setup

1. Turn the knob to select [PRESET EQ ],then press the knob.
2. Turn the knob to select [USER],then press the knob.
3. Turn the knob to select frequency for adjustment.

X-BASS Adjustment

1. Turn the knob to select [XBASS],then press the knob.
2. Turn the knob to adjustment [0-20].

Surround Setup

1. Tum the knob to select [SURROUND],then press the knob.
2. Tum the knob to select [OFF/ON].

Bass Adjustment

1. Turn the knob to select [BASS],then press the knob.
2. Turn the knob to adjustment [-7 to +7].

Middle Adjustment

1. Turn the knob to select [MIDDLE],then press the knob.
2. Turn the knob to select [ L7-L0 to Rl-R7].

AUDIO SETTINGS

1. Press the knob to enter the [MENU].
2. Turn the knob to select [AUDIO],then press the knob.

Treble Adjustment

1. Turn the knob to select [TREBLE],then press the knob.
2. Turn the knob to select [ -7 to +7].

Audio Setup Reset

1. Turn the knob to select [AUDIO RESET],then press the knob.
2. Turn the knob to select [NO/YES].

XOVER SETUP

1. Press the knob to enter the [MENU].
2. Turn the knob to select [AUDIO],then long press the knob enter the [XOVER].

Xover List

1. Press the knob to enter the [MENU].
2. Turn the knob to select [AUDIO],then long press the knob enter the [XOVER].

Xover List

NET2-WAY

| ****

TWEETER

| HPF FREQ| FULL/630HZ/700HZ/800HZ/l K/l .6K/

2.5K/3.l 5K/ 4K/5K/6.3K/8K/lOK/ l2.5K/

PHASE| REVERSE/NORMAL
SLOPE| 6D8/ l2DB/ 18D8
GAIN LEFT| 0~ 8
GAIN RIGHT| 0~ 8

FRONT

| HPF FREQ| FULL/30HZ/40HZ/50HZ/63HZ/70HZ/ 80HZ/90HZ/l00HZ/l 25HZ/l 60HZ/
SLOPE| -6DB/-l2DB/-l8DB
PHASE| REVERSE/NORMAL
GAIN| 0~ 8

REAR

| HPF FREQ| FULL/30HZ/40HZ/50HZ/63HZ/70HZ/ 80HZ/90HZ/lO0HZ/l 25HZ/l 60HZ/
SLOPE| -6DB/-l2DB/-l8DB
PHASE| REVERSE/NORMAL
GAIN| 0~ 8
**** SUBWOOFER| LPF FREQ| 30HZ/40HZ/50HZ/ 63HZ/70HZ/

80HZ/90HZ/l 00HZ/l 25HZ/l 60HZ/

l 80HZ/220HZ/250HZ/3l 5HZ/400HZ/ 500HZ/ 630HZ/700HZ/800HZ

SLOPE| -6DB/-l2DB/-l8DB
PHASE| REVERSE/NORMAL
GAIN| 0~ 8

1. Press the knob to enter the [MENU].
2. Turn the knob to select [AUDIO],then long press the knob enter the [XOVER].

Xover List

Menu          Adjustment

NET3-WAY

| ****

TWEETER

| HPF FREQ| FULL/630HZ/700HZ/800HZ/l K/l .6K/2.5K/

3.l 5K/4K/5K/6.3K/8K/l0K/l 2.5K/

SLOPE| -6DB/-l 2DB/-l8DB
PHASE| REVERSE/NORMAL
GAIN LEFT| o- 8
GAIN RIGHT| o- 8

MIDDLE

| HPF FREQ| FULL/30HZ/40HZ/50HZ/63HZ/70HZ/80HZ/ 90HZ/ lO0HZ/ l 25HZ/ l 60HZ/l 80HZ/220HZ/

250HZ/315HZ/400HZ/500HZ/630HZ/

700HZ/800HZ

SLOPE| -6DB/-l 2DB/-l8DB
LPF FREQ| FULL/630HZ/700HZ/800HZ/lK/l .6K / 2.5K/3. l 5K/ 4K / 5K/6.3K/

8K/l0K/l2.5K/

SLOPE| -6DB/-l 2DB/-l8DB
PHASE| REVERSE/NORMAL
GAIN| o- 8

WOOFER

| HPF FREQ| FULL/30HZ/40HZ/50HZ/63HZ/70HZ/80HZ/ 90HZ/ l 00HZ/ l 25HZ/ l 60HZ/ l 80HZ/220HZ/

250HZ/315HZ/400HZ/500HZ/630HZ/

700HZ/800HZ

SLOPE| -6DB/-l 2DB/-l8DB
LPF FREQ| FULL/630HZ/700HZ/800HZ/l K /l .6K/

2.5K/3.l 5K/4K/5K/6.3K/8K/l0K/l 2.5K

SLOPE| -6DB/-l 2DB/-l8DB
PHASE| REVERSE/NORMAL
GAIN| o- 8

SUBWOOFER

| LPF FREQ| 30HZ/40HZ/50HZ/63HZ/70HZ/80HZ/

90HZ/ l 00HZ/ l 25HZ/ l 60HZ/ l 80HZ/220HZ/

250HZ/315HZ/400HZ/500HZ/630HZ/

700HZ/800HZ

SLOPE| -6DB/-l 2DB/-l8DB
PHASE| REVERSE/NORMAL
GAIN| o- 8

1. Press the knob to enter the [MENU].
2. Tum the knob to select [AUDIO],then long press the knob enter the [XOVER].

Net 4.2 Front Setup

1. Tum the knob to select [NET 4.2],then press the knob.
2. Tum the knob to select [FRONT],then press the knob.
3. Tum the knob to select [HPF FREQ/HPF SLOPE/LPF FREQ/LPF SLOPE/PHASE/ GAIN],then press the knob.

Net 4.2 Rear Setup

1. Tum the knob to select [NET 4.2],then press the knob.
2. Tum the knob to select [FRONT],then press the knob.
3. Tum the knob to select [HPF FREQ/HPF SLOPE/LPF FREQ/LPF SLOPE/PHASE/GAIN],then press the knob.

Net 4.2 Subwoofer Setup

1. Tum the knob to select [NET 4.2],then press the knob.
2. Tum the knob to select [SUBWOOFER],then press the knob.
3. Tum the knob to select [LPF FREQ/LPF SLOPE/PHASE/GAIN], then press the knob.

Net 2-Way Tweeter Setup

1. Tum the knob to select [NET 2-WAY],then press the knob.
2. Tum the knob to select [TWEETER],then press the knob.
3. Tum the knob to select [HPF FREQ/GAIN LEFT/GAIN RIGHT], then press the knob.

Net 2-Way Front Setup

1. Tum the knob to select [NET 2-WAY],then press the knob.
2. Tum the knob to select [FRONT],then press the knob.
3. Tum the knob to select [HPF FREQ/HPF SLOPE/GAIN],then press the knob.

Net 2-Way Rear Setup

1. Tum the knob to select [NET 2-WAY],then press the knob.
2. Tum the knob to select [REAR],then press the knob.
3. Tum the knob to select [HPF FREQ/HPF SLOPE/GAIN],then press the knob.

Net 2-Way Subwoofer Setup

1. Tum the knob to select [NET 2-WAY],then press the knob.
2. Tum the knob to select [SUBWOOFER],then press the knob.
3. Tum the knob to select [LPF FREQ/LPF SLOPE/LPF PHASE/GAIN], then press the knob.

XOVER SETUP

1. Press the knob to enter the [MENU].
2. Turn the knob to select [AUDIO],then long press the knob enter the [XOVER].

Net 3-Way Tweeter Setup

1. Turn the knob to select [NET 3-WAY],then press the knob.
2. Turn the knob to select [TWEETER],then press the knob.
3. Turn the knob to select [HPF FREQ/HPF SLOPE/PHASE/GAIN LEFT/ GAIN RIGHT],then press the knob.

Net 3-Way Middle Setup

1. Turn the knob to select [NET 3-WAY],then press the knob.
2. Turn the knob to select [MIDDLE],then press the knob.
3. Turn the knob to select [HPF FREQ/HPF SLOPE/LPF FREQ/LPF SLOPE/ PHASE/GAIN], then press the knob.

Net 3-Way Woofer Setup

1. Turn the knob to select [NET 3-WAY],then press the knob.
2. Turn the knob to select [WOOFER],then press the knob.
3. Turn the knob to select [HPF FREQ/HPF SLOPE/LPF FREQ/LPF SLOPE/ PHASE/GAIN], then press the knob.

Net 3-Way Subwoofer Setup

1. Turn the knob to select [NET 3-WAY],then press the knob.
2. Turn the knob to select [SUBWOOFER],then press the knob.
3. Turn the knob to select [LPF FREQ/LPF SLOPE/PHASE/GAIN], then press the knob.

ANIMATION SETTINGS

1. Press the knob to enter the [MENU].
2. Turn the knob to select [ANIMATION],then press the knob.
3. Turn the knob to select [OFF/PER 15SEC/30SEC/1 MIN/2MIN/4MIN].

DEMO MODE SELECT

1. Press the knob to enter the [MENU].
2. Turn the knob to select [DEMO MODE],then press the knob.
3. Turn the knob to select [OFF/ON].

DTA SETTINGS

1. .Press the knob to enter the [MENU].
2. Turn the knob to select [DTA SET],then press the knob.

DTA Settings List

1. Press the knob to enter the [MENU.
2. Turn the knob to select [DA SET.then press the knob.

Car Type Settings

1. Turn the knob to select [CAR TYPE].then press the knob.
2. Turn the knob to select [SMALL /MEDIUM /LARGE].

Listening Position Settings

1. Turn the knob to select [POSITION],then press the knob.
2. Turn the knob to select [USER/FRONT R/FRONT L/CENTER].

Delay Unit Settings

1. Turn the knob to select [UNIT], then press the knob.
2. Turn the knob to select [MS/CM/INCH].

Distance Net 4.2 Settings

1. Turn the knob to select [DISTANCE],then press the knob.
2. Turn the knob to select CHI~CH8 then press the knob.
3. Turn the knob to select|0~18.0MS/ 0~612CM/ 0-240 INCH].

Distance Net 2-Way Settings

1. Turn the knob to select [DISTANCE],then press the knob.
2. Turn the knob to select (CH1~CH8].then press the knob.
3. Turn the knob to select [0~18.0MS/ 0-612CM/ 0-240 INCH].

Distance Net 3-Way Settings

1. Turn the knob to select (DISTANCE],then press the knob.
2. Turn the knob to select (CH1~CH8].then press the knob.
3. Turn the knob to select[0~18.0MS/ 0~612CM/ 0-240 INCH].
   • Note: Net 4.2/Net 2-Way /Net 3-Way can be set in the “XOVER” option.

DA Reset

1. Turn the knob to select [DTA RST],then press the knob.
2. Turn the knob to select [NO/YES].

TIME ALIGNMENT(DISTANCE)

1. Press the knob to enter the [MENU].
2. Turn the knob to select [DTA SET],then press the knob.
3. Turn the knob to select [DISTANCE],then press the knob.
4. Turn the knob to select[F LEFT/F RIGHT/R LEFT/R RIGHT/SUBWOOFER] to adjustment.

Determining the value tor adjustment.

1. Determine the center of the currently set listening position as the reference point.
2. The adjustable speaker has five directions: front left, front right, back left, back right, and back.
3. The time for the speakers in the five directions to reach the center is the same by default.
4. Set the value for each speaker, the delay range: 0-20ms.
5. Adjust the increase or decrease of each speaker, 0.2ms each time.

Example: When is selected as the listening position:

CLOCK AND DATE SETTINGS

1. Press the knob to enter the [MENU].
2. Turn the knob to select [CLOCK],then press the knob.

Clock And Date Settings List

Clock Format Settings

1. Turn the knob to select [CLK FRMT],then press the knob.
2. Turn the knob to select [12H/24H].

Clock Adjust

1. Turn the knob to select [CLK ADJ],then press the knob.
2. Turn the knob to adjustment.
3. Press the knob to switch the clock/minute adjustment.

Date Format Settings

1. Turn the knob to select [DATE FORMAT],then press the knob.
2. Turn the knob to select [DD-MM-YY/MM-DD-YY].

Date Settings

1. Turn the knob to select [DATE SET],then press the knob.
2. Turn the knob to adjustment.
3. Press the knob to switch day/month/year adjustment

TUNER SETTINGS

1. Press the knob to enter the [MENU].
2. Tum the knob to select [TUNER],then press the knob.

Tunner Settings List

SCIENCE/VARIED/POP M/ ROCK M/EASY M/LIGHT M/ CLASSICS/OTHER M/WEATHER/ FINANCE/CHILDREN/SOCIAL/ RELIGION /PHONE IN/TRAVEL/ LEISURE/ JAZZ/COUNTRY/ NATION M/OLDIES/FOLK M/

DOCUMENT

DX/LOCAL
RDS OFF/ON
I| TA OFF/ON
AF ON/OFF
EON OFF/ON
REG OFF/ON
PTY OFF/ON
REGIONAL EUROPE/USA/ ASIA/RUSSIA

Stereo/Mono Select

• Turn the knob to select [STEREO or MONO],then turn the knob select [STEREO/MONO].

DX/Local Select

• Turn the knob to select [LOC or DX],then turn the knob select [DX /LOCAL].
• Remark: DX:Distant exchange.

RDS ON/OFF

• Turn the knob to select [RDS OFF],then turn the knob select [RDS OFF,ON].

Tuner Area Select

• Turn the knob to select [REGIONAL],then turn the knob select [ASIA/RUSSIA/EUR/USA].

DISPLAY SETTINGS

1. Press the knob to enter the [MENU].
2. Turn the knob to select [DISPLAY],then press the knob.

Display Settings List

Key Light Select

1. Turn the knob to select [COLOR SEL],then press the knob.
2. Turn the knob to select key light color:[AUTO/RED/GREEN /BLUE/YELLOW /CY AN/PURPLE/WHITE].

Spectrum ON/OFF

1. Turn the knob to select [SPECTRUM],then press the knob.
2. Turn the knob to select [OFF/ON].

ID3 ON/OFF

1. Turn the knob to select [ID3 TAG],then press the knob.
2. Turn the knob to select [OFF/ON].

System Version

Tum the knob to select [VERSION],then press the button to query the system version information.

TROUBLE SHOOTING

Not work

• Fuse blown
• Loose panel contact

Not responding

• System problem

No bass

• Subwoofer setting level is too small

Can’t turn on voice

• Bluetooth is not connected
• Phone does not support voice

Notplaylng

• Incorrect device format
• Device error
• Unsupported audio file

Radio reception is poor

• Poor contact of radio antenna
• Poor signal at location

Remote control is invalid

• Remote control battery is low

Bluetooth call ls poor

• Microphone is too far away

Remedy

• Replace the fuse: small 15A[Red)
  • Take out the panel and reinstall
• Reset the unit
  • Enter AUDIO to set SVOL
• Connect Bluetooth
• N.A
  • Reformat
• Replacement device
  • Replace supported audio files
• Reconnect the radio antenna
  • Change to other positions
• Replace CR2025 battery
  • Speak into the microphone

SPEAKER CONNECTION

• Do not connect the speaker leads of the power cord to the car battery; otherwise,the unit wil be seriously damaged.
• Before oconnecting the speak leads of the power cord to the speakers, check the speaker wiring in your car.

SPECIFICATION

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>