ATEN KX9970F 5K DisplayPort KVM Over IP Extender User Guide

June 3, 2024
Aten

ATEN KX9970F 5K DisplayPort KVM Over IP Extender

ATEN KX9970F 5K DisplayPort KVM Over IP Extender-FIG1

Hardware Overview

ATEN KX9970F 5K DisplayPort KVM Over IP Extender-FIG2

KX9970FT

  1. KVM ports
  2. access control port
  3. audio ports (PC / server)
  4. RS-232 serial port (PC / server)
  5. power & status LEDs
  6. grounding terminal
  7.  DC power jacks
  8. audio ports (console)
  9. RS-232 serial device port
  10. SFP+ slots
  11. console ports
  12. function switch

KX9970FR

  1. power & status LEDs
  2. operation pushbuttons
  3. USB peripheral port
  4. grounding terminal
  5. DC power jacks
  6. audio ports (console)
  7. RS-232 serial device port
  8. USB peripheral port
  9. SFP+ slots
  10. console ports
  11. function switch

Installation

ATEN KX9970F 5K DisplayPort KVM Over IP Extender-FIG3

Bracket Attachment
To install KX9970FT onto a rack or wall, fi rst, attach the mounting bracket by doing the following.

1 Unscrew the screws from the side of the unit as shown.
2 Use the screws from step 1 to secure the mounting bracket to the bottom of the unit as shown.

Rack Mount
Secure the unit by screwing the bracket onto a convenient location on the rack.

Wall Mount
Use the center hole to screw the bracket onto a secure wall surface.

Connecting KX9970FT

  1. Use a grounding wire to ground the unit by connecting one end to the grounding terminal and the other end to a suitable grounded object.
    Note: Do not omit this step. Proper grounding helps prevent damage to the unit from power surges or static electricity.

  2. For KX9970FT only, do the following:

    • Using the DisplayPort cable and USB Type-A to Type-B cable provided,connect the unit’s KVM ports to the video and USB ports of the PC /
      server you are controlling.

    • (Optional) For audio transmission, connect the unit’s front audio ports to those of the PC / server.

    • (Optional) For control of serial devices, connect the unit’s front RS-232 serial port to that of the PC / server.

    • (Optional) To use a 2XRT-0015G, connect it to the unit’s PS/2 access control port.

  3. For console operation, connect the unit’s console ports to a USB keyboard & mouse, DisplayPort monitor, microphone, speakers, and/or serial console device as needed.

  4. (Optional) For KX9970FR only, to use peripheral USB devices, connect up to 2 to the unit’s 2 USB peripheral ports.
    Note: The USB peripheral ports are isochronous endpoints compatible and thus support video and audio streaming.

  5. Connect the unit to power, thereby turning it on, by plugging the power adapter provided into an AC power source and plugging its cable into 1 of the unit’s 2 DC power jacks.
    Note: For power redundancy, optionally connect a second power adapter into another AC power source and connect its other end to the unit’s second DC power jack

  6. For KX9970FT, power on the PC / server.
    Extending KX9970FT — KX9970FR

  7. Every KX9970F (Tx / Rx) is equipped with two SFP+ slots. For extending control from a KX9970FT to a KX9970FR, it can be established using fi beroptic cables through one of the following methods:

    • Connect them directly, point-to-point, via their SFP+ slots.
    • Connect them to the same network via their SFP+ slots.
      Note: All KX9970F installed within the same network can be managed using
      CCKM, ATEN’s dedicated KVM over IP Matrix Manager.

OSD Options

Both the transmitter and receiver units can be confi gured from the OSD menu on the receiver. For OSD confi guration, refer to the KE/KX user manual
(downloadable at www.aten.com).

Package Contents

  • 1 KX9970FT 5K DisplayPort KVM over IP Transmitter / KX9970FR 5K
  • DisplayPort KVM over IP Receiver
  • 1 DisplayPort cable (KX9970FT only)
  • 1 USB Type-A to Type-B cable (KX9970FT only)
  • 1 mounting kit (KX9970FT only)
  • 1 power adapter
  • 1 foot pad set (4 pcs)
  • 1 user instructions

Support and Documentation Notice

All information, documentation, fi rmware, software utilities, and specifi cationscontained in this package are subject to change without prior notifi cation by the
manufacturer.
To reduce the environmental impact of our products, ATEN documentation an software can be found online at http://www.aten.com/download/

Technical Support

www.aten.com/support

Scan for more information

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals