SPYCLOPS SPY-MNDM2WIP5 Mini Turret Dome Style IP Camera User Guide
- June 3, 2024
- SPYCLOPS
Table of Contents
MINI TURRET DOME STYLE
IP CAMERA
SPY-MNDM2WIP5
SPY-MNDM2WIP5 Mini Turret Dome Style IP Camera
- 2.8mm Fixed Lens
- 5MP CMOS Sensor
- Supports 1080P/30, 4MP/25 and 5MP/20 Resolution
- IP67 Water-Resistant
- Smart IR LEDs for up to 20 Meters Night Vision
- Supports H.264, H.264+, H.265 and H.265+
- Built in PoE
02020 Metra Electronics Corporation 460 Walker Street, Holly Hill, FL
32117-2699 Specifications are subject to change without notice.
All trademarks are the property of their respective owners.
386-255-0234 •
www.spyclopsusa.com
Please read this manual carefully and keep it properly before using our
network camera products.
Statement
Thank you for using our products, please read this manual carefully before
trying .
This manual is applicable to network series products.
This manual may contain information that is technically inaccurate,
inconsistent in the product~ function and operation, or in a typographical
error. Our company will update the context in the manual according to the
enhancement of product features. Updated content will be added in the new
version of this manual without further notice.
-
This equipment should be installed in a well-ventilated environment. Please keep proper space with the ground during installation.
This product can not withstand heavy loads. Do not place heavy objects or multi-layer overlays on this product. -
Power must be under safety certification, Its output voltage, curren~ voltage polarity and operating temperature must comply with the
-
power requirements of this equipment.
When using this equipment in thunder and lightning conditions.
please pay attention to install lightning protection device or cut off -
the power.
In order to get high quality video and pictures, make sure your internet connection is stable and smooth.
Network Settings
IPv4 address of the PC needs to be in the same network segment as the IP
address of the IP camera to allow connection.
(Note: The default IP address of the IP Camera: 192.168.1.168.)
Specific settings in window system can refer to the following methods:
Method one:
-
Check the IPv4 address of PC, click [Start) / [Control Panel ) / [Network and Internet) / [Network and Sharing Center) / [Local Network ) / [Details ) .
-
Set the PC IPv4 address(E .g PC:192.168.1.165)
-
Or add PC and network cameras in a same network segment (E.g:192.168.1.165).
Note: The 1Pv4 address can
not use an existing IP of another device when you add in LAN.
Method Two:
Use IP search tool, changing searclned IP camera to the same network segment as the PC’s. (Note: Default IP address of the IP Camera: 192.168.1.168. Default Username: admin, default password: admin; the changed URL can not conflict with the IP address of other devices in the LAN).
Ping device address
-
Connect camera and PC by network cable in the same LAN, power on. Connecting as following (PoE switch, camera, PC connection photo).
-
Left click window [Start] menu, input “cmd’ in [Program/file searcher ) to open window command(or you can press shortcut “win+R” directly on keyboard to input “cmd”), from the Cursor blinking side, input “Ping and press “Enter· (For example, when the camera l~~ress is 192.168.1.168, then input “ping 192.168.1.168” and press “Enter”) to check the system connection information. For example as below photo, when system connection information is data package: sent=4, received=4, loss=O. <0% loss> means PC and camera signal communication is normal you can login the camera by IE Onternet Explorer) web browser.
Connection and login
Please download and install OCX plugin the first time you connect to the camera, open [IP Search] tool and dick [Search) dCXJble click the camera you need to con~ webpage of login will come ou~ then dick [Download) to download the OCX piugin and install. After installation, please Click refresh IE and input user and password (Default Factory setting user is admin, default password is admin. we strongly suggest you to change the user and password to higher safety level), details are shown as following photos:
Real-time preview and parameter configuration
-
Enter the user name and password of the device in the browser user interface and enter the real-time preview interface.
-
Click [Configuration) to enter the device and other functions. including local configuration, system. local networic. video, image and event configuration. User.; can selectively set these features to achieve better performance based on the actual situation of the application scenariio.
IMPORTANT!! Please fill out this warranty card to register your new Spyclops Surveilance System within 30 days of purchase.
□ Mr. □ Mrs. □ Ms. □ Miss.
First name ———–
Last Name ——— — Initial
Company Name __ ..:., __ Date of Birth _
Address ____ City __ State _ Zip _
Phone No. ———— ————— Model#
Store Name ___ Date of Purchase __ Purchase Price $ _
What influenced you to purchase a Spyclops Surveilance System?
□ Price / Value
□ Sales Person
□ Features
□ Others ——-
□ Warranty
□ Appearance
□ Brand name
Education
□ High School
□ Some College
□ Completed College
□ Graduate School
Which best describes your total household income?
□
Under $20,000 □ $20,000 ~ $40,000 □ $40, 001 ~ $60,000 □ Over $60,001
Thanks for your time to complete the questionnaire. Your answers are important
to us!!
www.MetraAV.com |
386-255-0234
© COPYRIGHT 2021 METRA ELECTRONICS CORPORATION 3/21
460 Walker Street
Holly Hill, FL 32117
SALES 386-255-0234
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>