Ethspymdomew2P Spyclops Ccd Plastic Mini Dome Camera User Guide
- June 4, 2024
- SPYCLOPS
Table of Contents
Ccd Plastic Mini Dome Camera
**User Guide
**
Ethspymdomew2P Spyclops Ccd Plastic Mini Dome Camera
©2020 Metra Electronics Corporation
460 Walker Street, Holly Hill, FL 32117-2699
Specifications are subject to change without notice.
All trademarks are the property of their respective owners.
386-255-0234 •
www.spyclopsusa.com
Please read this manual carefully and keep it properly before using our
network camera products.
Statement
Thank you for using our products, please read this manual carefully before
trying.
This manual is applicable to network series products.
This manual may contain information that is technically inaccurate,
inconsistent in the product~ function and operation, or in a typographical
error. Our company will update the context in the manual according to the
enhancement of product features. Updated content will be added in the new
version of this manual without further notice.
-
This equipment should be installed in a well-ventilated environment. Please keep proper space with the ground during installation.
This product can not withstand heavy loads. Do not place heavy objects or multi-layer overlays on this product. -
Power must be under safety certification, Its output voltage, current ~ voltage polarity, and operating temperature must comply with the
-
power requirements of this equipment.
When using this equipment in thunder and lightning conditions.
please pay attention to installing lightning protection devices or cutting off -
the power.
In order to get high-quality video and pictures, make sure your Internet connection is stable and smooth.
Network Settings
The IPv4 address of the PC needs to be in the same network segment as the IP
address of the IP camera to allow the connection.
(Note: The default IP address of the IP Camera: is 192.168.1.168.)
Specific settings in the window system can refer to the following methods:
Method one:
- Check the IPv4 address of PC, click [Start) / [Control Panel ) / [Network and Internet) / [Network and Sharing Center) / [Local Network ) / [Details ) .
- Set the PC IPv4 address(E .g PC:192.168.1.165)
- Or add PC and network cameras in a same network segment (E.g:192.168.1.165)
Note: The 1Pv4 address can not use an existing IP of another device when you
add in LAN.
Method Two:
Use the IP search tool, changing the searclned IP camera to the same network
segment as the PCs. (Note: Default IP address of the IP Camera:
192.168.1.168. Default Username: admin, default password: admin; the changed
URL can not conflict with the IP address of other devices in the
LAN).
Ping device address
- Connect camera and PC by network cable in the same LAN, power on. Connecting as following (PoE switch, camera, PC connection photo).
- Left click window (Start ) menu, input “cmd’ in [Program/ file searcher ) to open the window command(or you can press shortcut “win+R” directly on the keyboard to input “cmd”), from the Cursor blinking side, input “Ping … A … – and press “Enter· (For example, when the camera l~~ress is 192.168.1.168, then input “ping 192.168.1.168” and press “Enter”) to check the system connection information. For example as in the below photo, when system connection information is data package: sent=4, received=4, loss=O. <0% loss> means PC and camera signal communication is normal you can log in to the camera by IE Internet Explorer) web browser.
Connection and login
Please download and install the OCX plugin the first time you connect to the
camera, open (IP Search )
I tool and dick (Search).
double click the camera you need to con~ webpage of login will come ou~ then
dick [Download) to download the OCX plugin and install it. After installation,
please cl~ refresh IE and input the user and password (Default Factory setting
the user is admin, the default password is admin. we strongly suggest you
change the user and password to higher safety level), details are shown in
following photos:
Real-time preview and parameter configuration
- Enter the user name and password of the device in the browser user interface and enter the real-time preview interface.
- Click (Configuration) to enter the device and other functions. including local configuration, and system. local networks. video, image, and event configuration. Users.; can selectively set these features to achieve better performance based on the actual situation of the application scenario.
SALES386-255-0234
- 2.8mm Fixed Lens
- 5MP CMOS Sensor
- Supports 1080P/30, 4MP/25, and 5MP/20 Resolution
- IP67 Water-Resistant
- Smart IR LEDs for up to 20 Meters of Night Vision
- Supports H.264, H.264+, H.265, and H.265+
- Built-in PoE
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.
IMPORTANT!! Please fill out this warranty card to register your new Spyclops Surveillance System within 30 days of purchase.
□ Mr. □ Mrs. □ Ms. □ Miss.
First name ———–
Last Name ——— —
Initial Company Name __ Date of Birth ____
Address ____ City __ State Zip
Phone No. ————
Model#—————
Store Name _____ Date of Purchase __ Purchase Price $ _
What influenced you to purchase a Spyclops Surveillance System?
□ Price / Value
□ Sales Person □ Features
□ Others ——-| □ Warranty
□ Appearance
□ Brand name
---|---
Education
□ High School
□ Some College| □ Completed College
□ Graduate School
---|---
Marital Status
□ Married □ Single
Which best describes your total household income?
□ Under $20,000
□ $20,000 ~ $40,000| □ $40, 001 ~ $60,000
□ Over $60,001
---|---
Thanks for the time to complete the questionnaire. Your answers are important to us!!
460 Walker Street
Holly Hill, FL 32117
www.MetraAV.com
386-255-0234
© COPYRIGHT 2021 METRA ELECTRONICS CORPORATION 3/21
Documents / Resources
|
SPYCLOPS Ethspymdomew2P Spyclops Ccd Plastic Mini Dome
Camera
[pdf] User Guide
Ethspymdomew2P Spyclops Ccd Plastic Mini Dome Camera, Ethspymdomew2P, Spyclops
Ccd Plastic Mini Dome Camera, Plastic Mini Dome Camera, Dome Camera, Camera
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>