SPYCLOPS SPY-DM2GIP5AF IP Camera User Guide

: June 4, 2024
: SPYCLOPS

Table of Contents

Statement
Network Settings
Ping device address
Connection and login
Real-time preview and parameter configuration
Drill Template
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SPYCLOPS SPY-DM2GIP5AF IP Camera

2.7-13.5mm Zoom and Autofocus Lens
5MP CMOS Sensor
Supports 1080P/30, 4MP/30 and 5MP/20 Resolution
IP67 Water-Resistant
Smart IR LEDs for up to 30 Meters Night Vision
Supports H.264, H.264+, H.265 and H.265+
Built in PoE

Statement

Thank you for using our products, please read this manual carefully before trying.
This manual is applicable to network series products.
This manual may contain information that is technically inaccurate, inconsistent in the product~ function and operation, or in a typographical error. Our company will update the context in the manual according to the enhancement of product features. Updated content will be added in the new version of this manual without further notice.

This equipment should be installed in a well-ventilated environment. Please keep proper space with the ground during installation.
This product can not withstand heavy loads. Do not place heavy objects or multi-layer overlays on this product.
Power must be under safety certification, Its output voltage, current voltage polarity and operating temperature must comply with the power requirements of this equipment.
When using this equipment in thunder and lightning conditions please pay attention to install lightning protection device or cut off the power.
In order to get high quality video and pictures, make sure your internet connection is stable and smooth.

Network Settings

IPv4 address of the PC needs to be in the same network segment as the IP address of the IP camera to allow connection.
(Note: The default IP address of the IP Camera: 192.168.1.168.)
Specific settings in window system can refer to the following methods:

Method one:

① Check the IPv4 address of PC, click [Start) / [Control Panel) / [Network and Internet) / [Network and Sharing Center) / [Local Network) / [Details) .

② Set the PC IPv4 address(E.g PC:192.168.1.165)

③ Or add PC and network cameras in a same network segment (E.g:192.168.1.165).

Note: The 1Pv4 address can not use an existing IP of another device when you add in LAN.

Method Two:
Use IP search tool, changing searclned IP camera to the same network segment as the PC’s. (Note: Default IP address of the IP Camera: 192.168.1.168. Default Username: admin, default password: admin; the changed URL can not conflict with the IP address of other devices in the LAN).

Ping device address

① Connect camera and PC by network cable in the same LAN, power on. Connecting as following (PoE switch, camera, PC connection photo).

Left click window [Start ] menu, input “cmd’ in [Program/file searcher) to open window command (or you can press shortcut “win+R” directly on keyboard to input “cmd”), from the Cursor blinking side, input “Ping ***” and press “Enter” (For example, when the camera IP address is 192.168.1.168, then input “ping 192.168.1.168” and press “Enter”) to check the system connection information. For example as below photo, when system connection information is data package: sent=4, received=4, loss=0, <0% loss> means PC and camera signal communication is normal you can login the camera by IE Onternet Explorer) web browser.

Please download and install OCX plugin the first time you connect to the camera, open [IP Search I tool and dick [Search ].
double click the camera you need to connect webpage of login will come out, then dick [Download] to download the OCX piugin and install. After installation, please click refresh IE and input user and password (Default Factory setting user is admin, default password is admin. we strongly suggest you to change the user and password to higher safety level), details are shown as following photos:

Real-time preview and parameter configuration

① Enter the user name and password of the device in the browser user interface and enter the real-time preview interface.

② Click [Configuration] to enter the device and other functions including local configuration, system. local networic. video, image and event configuration. User.; can selectively set these features to achieve better performance based on the actual situation of the application scenariio.

Drill Template

Hole A: for cables routed through the ceilling
Hole B: for cables routed through the side opening
Screw hole 1: for Mounting Base

IMPORTANT!! Please fill out this warranty card to register your new Spyclops Surveilance System within 30 days of purchase.

□ Mr. □ Mrs. □ Ms. □ Miss.
First name Last Name Initial__
Company Name ____
Date of Birth ____//____
Address _
City ____
State ___
Zip ____
Phone No. Model#____
Store Name ___
Date of Purchase ___//_
Purchase Price $___

What influenced you to purchase a Spyclops Surveilance System?
□ Price / Value
□ Sales Person
□ Features
□ Others____
□ Warranty
□ Appearance
□ Brand name

Education
□ High School
□ Some College
□ Completed College
□ Graduate School

Marital Status
□ Married
□ Single

Which best describes your total household income?
□ Under $20,000
□ $20,000 ~ $40,000
□ $40,001 ~ $60,000
□ Over $60,001

Thanks for your time to complete the questionnaire. Your answers are important to us!!

460 Walker Street Holly Hill, FL 32117