SPYCLOPS SPY-MNBLT2WIP5 Mini Bullet IP Camera User Guide
- June 3, 2024
- SPYCLOPS
Table of Contents
SPYCLOPS SPY-MNBLT2WIP5 Mini Bullet IP Camera
Statement
Thank you for using our products, please read this manual carefully before
trying.
This manual Is applicable to network series products.
This manual may contain information that is technically inaccurate,
inconsistent in the product’s function and operation, or in a typographical
error Our company will update the context in the manual according to the
enhancement of product features. Updated content will be added in the new
version of this manual without further notice.
-
This equipment should be installed in a well-ventilated environment Please keep proper space with the ground during installation.
This product can not withstand heavy loads. Do not place heavy objects or multi-layer overlays on this product. -
Power must be under safety certification, Its output voltage, current voltage polarity and operating temperature must comply with the power requirements of this equipment.
-
When using this equipment in thunder and lightning condition please pay attention to install lightning protection device or cut off the power.
-
In order to get high quality video and pictures, make sure your internet connection is stable and smooth.
Network Settings
IPv4 address of the PC needs to be in the same network segment as the IP
address of the IP camera to allow connection.
( Note: The default IP address of the IP Camera: 192.168.1.168.) Specific
settings in window system can refer to the following methods:
Method one:
-
Check the IPv4 address of PC, click [Start] / [Control Panel / [Network and Internet] / [Network and Sharing Center] / [Local Network] / [Details] .
-
Set the PC IPv4 address(E.g PC:192.168.1.165)
-
Or add PC and network cameras in a same network segment (E.g:192.168.1.165).
Note: The 1Pv4 address can not use an existing IP of another device when you add in LAN.
Method Two:
Use IP search tool, changing searched IP camera to the same network segment as
the PC’s. (Note: Default IP address of the IP Camera: 192.168.1.168. Default
Username: admin. default password: admin; the changed URL can not conflict
with the IP address of other devices in the LAN).
Ping device address
-
(D Connect camera and PC by network cable in the same LAN, power on. Connecting as following (Poe switch, camera, PC connection photo).
-
Left click: window [Start l menu, Input ‘cud” in [Program/ file searcher] to open window cornland(or you can press shortcut ‘winner” directly on keyboard to input “cud’), from the Cursor blinking side, input ‘Ping and press ‘Enter’ (For example, when the camera I rests is 192.168.1.168, then input ‘ping 192.168.1.168’ and press ‘Enter’) to check the system connect, on information. For example as below photo, when system connection information is data package: sent=4. received=4, loss=O, <0% loss> means PC and camera signal communication is Norma you can login the camera by IE Internet Explorer) web browser.
Connection and login
Please download and install OCX plugin the first time you connect to the
camera, open I IP Search I tool and click: [Search] , double click: the camera
you need to connect. webpage of login will come out. then click: [Download] to
download the OCX plugin and install. After installation, please refresh IE and
input user and password (Default Factory setting user is admin. default
password is admin. we strongly suggest you to change the user and password to
higher safety level), details are shown as following photos:
Real-time preview and parameter configuration
-
Enter the user name and password of the device in the browser user interface and enter the real-time preview interface.
-
Click [Configuration to enter the device and other functions, including local configuration, system, local network. video, image and event configuration. User.; can selectively set these features to achieve better performance based on the actual situation of the application Scarano.
SPY-MNBLT2WIP5 / SPY-MNBLT2GIP5
MINI BULLET IP CAMERAS
- 2.8mm fixed Lens
- 5MP CMOS Sensor
- Supports 1080P/30, 4MP/25 & 5MP/20 Resolution
- IP67 Water Resistant
- Smart IR LEDs for up to 25 Meters Night Vision
- Supports H.264, H.264+, H.265 & H.265+
- Built in PoE
SALES 386-255-0234
AVAILABLE IN WHITE AND GRAY
IMPORTANT!! Please fill out this warranty card to register your new Cyclops Surveillance System within 30 days of purchase.
First name Last Name Initial ———– ——— —
Company Name _ ..,: __ Date of Birth _
Address City __ State Zip
Phone No. Model# ———— —————
Store Name _____ Date of Purchase __ Purchase Price$ _
What influenced you to purchase a Cyclops Surveillance System?
□ Price / Value □ Sales Person □ Features □ Others
□ Warranty □ Appearance □ Brand name
Education ——-
□ High School □ Some College □ Completed College □ Graduate School
Marital Status
□ Married □ Single
Which best describes your total household income?
□ Under $20,000 □ $20,000 ~ $40,000 □ $40,001 ~ $60,000 □ Over $60,001
Thanks for your time to complete the questionnaire. Your answers are important to us!!