SPYCLOPS 120LT3WIP8 4K Color Night Vision IP Camera User Guide
- June 4, 2024
- SPYCLOPS
Table of Contents
SPYCLOPS 120LT3WIP8 4K Color Night Vision IP Camera
-
This equipment should be installed in a well-ventilated environment Please keep proper space with the ground during installation.
This product can not withstand heavy loads. Do not place heavy objects or multi-layer overlays on this product. -
Power must be under safety certification, Its output voltage, current voltage polarity and operating temperature must comply with the power requirements of this equipment.
-
When using this equipment in thunder and lightning conditions. please pay attention to install lightning protection device or cut off the power.
In order to get high quality video and pictures, make sure your internet connection is stable and smooth.
Network Settings
IPv4 address of the PC needs to be in the same network segment as the IP
address of the IP camera to allow connection. (Note: The default IP address of
the IP Camera: 192.168.1.168.) Specific settings in window system can refer to
the following methods:
Method one:
-
Check the IPv4 address of PC, click [Start] / [Control Panel) / [Network and Internet] / [Network and Sharing Center] / [Local Network] / [Details] .
-
Set the PC IPv4 address(E.g PC:192.168.1.165)
-
Or add PC and network cameras in a same network segment (E.g:192.168.1.165).
Note:
The 1Pv4 address can not use an existing IP of another device when you add in
LAN.
Method Two:
Use IP search tool, changing searched IP camera to the same network segment as
the PC’s. (Note: Default IP address of the IP Camera: 192.168.1.168. Default
Username: admin. default password: admin; the changed URL can not conflict
with the IP address of other devices in the LAN).
Ping device address
-
Connect camera and PC by network cable in the same LAN, power on. Connecting as following (PoE switch, camera, PC connection photo).
-
Left click: window [Start l menu, Input ‘cmd” in [Program/ file searcher] to open window command(or you can press shortcut ‘win+R” directly on keyboard to input “cmd’), from the Cursor blinking side, input ‘Ping … … …. and press ‘Enter’ (For example, when the camera is 192.168.1.168, then input ‘ping 192.168.1.168’ and press ‘Enter’) to check the system connect, on information. For example as below photo, when system connection information is data package: sent=4. received=4, loss=O, <0% loss> means PC and camera signal communication is normal, you can login the camera by IE Internet Explorer) web browser.
Connection and login
Please download and install OCX plugin the first time you connect to the
camera, open I IP Search I tool and click: [Search] , double click: the camera
you need to connect. webpage of login will come out. then click: [Download] to
download the OCX plugin and install. After installation, please refresh IE
and input user and password (Default Factory setting user is admin. default
password is admin. we strongly suggest you to change the user and password to
higher safety level), details are shown as following photos:
Real-time preview and parameter configuration
-
Enter the user name and password of the device in the browser user interface and enter the real-time preview interface.
-
Click [Configuration to enter the device and other functions, including local configuration, system, local network. video, image and event configuration. User.; can selectively set these features to achieve better performance based on the actual situation of the application scenario.
Record in 4K resolution with a small but powerful IP camera that captures
video up to 8MP at 30 fps, for a crisp, clear picture, even in low light or
dark conditions. The advanced CMOS sensor has the latest technology to provide
color night vision with superior picture quality and better clarity in low
light. For completely dark environments, smart IR LEDs can see objects up to
25 meters away at night and automatically adjust the IR LED brightness to
avoid a washed out image. A built-in microphone records audio and the camera’s
H.265+ video compression reduces bandwidth and video storage demands without
sacrificing the video quality.
- Choose color night vision or smart IR LEDs setting based on the environment
- Color night vision:
- Uses the latest technology for low light conditions
- Works best with an existing ambient light source and areas with streetlights
- Must be enabled through the camera’s configuration menu
- Smart IR LEDs:
- Automatically adjusts the IR LEDs for night vision up to 25 meters
- Prevents images from appearing washed out if too close to the IR LEDs
- Works best for completely dark environments with no ambient light source
- Supports 1080p/30, 4MP/30, 6MP/30, & BMP/30 resolutions
- Water-resistant, rated IP67
- Supports H.264, H.264+, H.265 & H.265+
- Built-in microphone
- Built-in PoE
IMPORTANT
Please fill out this warranty card to register your new Spyclops
Surveilance System within 30 days of purchase. 
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>