LOREX W891UA Series 12MP Dual Lens WiFi Camera User Manual
- June 3, 2024
- Lorex
Table of Contents
LOREX W891UA Series 12MP Dual Lens WiFi Camera
Package Contents
Note: Based on 1 camera
- 12MP Dul-Lens Wi-Fi Camera (x1)
- Wall Mounting Bracket (x1)
- Mounting Plate (x1)
- Power Adapter (x1)
- Mounting Template (x1)
- MicroSD Card (x1)
- Wrench (x1)
- Anchors & Screws (x8)
- Cable Clips (x4)
- Drill
- Screwdriver
Status Indicator
Operating correctly.
Ready for network connection.
Device malfunction.
Network connection failed.
A firmware update is in progress.
*Press and hold the reset button until you hear the audio prompt.
Setup
-
Download
-
Connect the power cable to the power adapter. Plug the power adapter to a wall outlet.
-
Tap in the app to add the device, then follow the in-app instructions to complete the setup.
Need help?
For up-to-date information and resources visit:
- Download product guides
- Find related troubleshooting tips & FAQs
- Watch how-to-videos
Register your product
Please see our full Terms of Service and Limited Hardware Warranty Policy at:
Copyright © 2022 Lorex Technology Inc
As our products are subject to continuous improvement, Lorex reserves the
right to modify product design, specifications and prices, without notice and
without incurring any obligation. E&OE. All rights reserved.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Please take attention that changes or modification not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with FCC/IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>