MiDiPLUS MIV2 Monitor Speakers User Manual
- June 5, 2024
- Midiplus
Table of Contents
MiDiPLUS MIV2 Monitor Speakers
Thank you for purchasing the lilii>ii’LU) 2nd generation Ml series active monitor with Bluetooth, features 3.5 inch/5.25 inch fiberglass woven cone woofer and 1 inch silk-dome tweeter with metal mesh cover. Flexible inputs including TRS, RCA, Aux in and Bluetooth streaming. The high energy efficiency Digital Audio Amplifier and all-wood cabinet provides the profession quality sound, it is great for bedroom studio, home entertainment system. This instructions will help you to know the function and operation of Ml series quickly. Please keep it properly in order to consults.
Notes:
- Do not remove the rear panel of the speaker to avoid electric shock.
- Long-term use of excessive volume will cause permanent hearing loss, please pay attention to protect your hearing.
- In order to be more effectively protected the speaker, please use the original packing carton if transporting them.
- Do not drop or splash water to the speaker,do not put objects full with liquid onto the device, like vase.
- The disconnecting device of this product is the power plug, the power socket should be near the product and easy to use, do not block by other objects.
Hookup diagrams
Connect to Computer
- Use the 4-pin speaker cable to connect the Right speaker and Left speaker
- Use the included 1/8″ audio cable to connect to your computer
Bluetooth Connectivity
- Use the included 4-pin speaker cable to connect the Right speaker and Left speaker, then turn on the power.
- Turn on the Bluetooth switch on the rear panel, then you should see “Ml 3” or “Ml 5″in the available devices list of smartphone or computer.
- Tapping it to connect it, when it is successfully connected, the lilii>iitLU) logo LED remain solid blue.
Front and Rear Panel Features
- AC Line cord: Connect to the live AC outlet
- Power: Turn on/off the power
- Right Speaker Connector: Connect the Right (passive) speaker to the Left (powered) speaker through the included speaker cable.
- Volume: Control the volume
- RCA: Unbalanced input, connect to the signal source through RCA cable (not included)
- TRS: Balanced input, connect to the signal source through TRS cable (not included)
- AUX IN: Stereo input, connect to the stereo signal source through the included 1/8″ cable
- Bluetooth: Turn on/off the Bluetooth connectivity
- HF Drive: 1 inch silkdome tweeter
- LF Drive: 3.5 inch (MI 3)/5.25 inch (MI S5) FiberglasS woven cone wooter
- MidiPLUs logo LED: The MidiPLUS logo LED illuminates white when the power is turned on, the LED illuminates blue and white breathing when the Bluetooth is turned on but unconnected, LED illuminates bule when Bluetooth is connected.
Technical Specifications
| MI 3 II | MI 5 II | |
|---|---|---|
| Frequency Response (-3dB) | 70 Hz ‒ 20 kHz | 60 Hz ‒ 20 kHz |
| HF Driver | 1″ Silk-dome | 1″ Silk-dome |
| LF Driver | 3.5″ Fiberglass woven cone | 5.25″ Fiberglass woven cone |
| Connectors | RCA Unbalanced 1/ 1/4″ TRS Balanced d |
4- 8″ Stereo Unbalance r
pin Speaker Connecto
Bluetooth 5.0 Supports: A2DP V1.3, AVRCP V1.6, GAVDP V1.3,
Bluetooth| HFP V1.7, HID V1.1, IOPT, SPP V1.2
Rated Power| 25 Watts x 2| 35 Watts x 2
Amplifiers Design| Class D| Class D
Dimension (WHD)| 120 202 160 mm| 170 290 224 mm
Net Weight| 3.31kg( Per Pair)| 7.37kg( Per Pair)
FCC Statement
FCC ID： 2AXTO-MIV2
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void your authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The distance between user and products should be no less than 20cm