MTX RZR-14-FS POLARIS RZR Front Speaker Pods Owner’s Manual
- June 3, 2024
- MTX
Table of Contents
RZR-14-FS
POLARIS ® RZR ® FRONT SPEAKER PODS
OWNER’S MANUAL
MTX.COM
RZR-14-FS POLARIS RZR Front Speaker Pods
THANK YOU
Thank you for making the AWESOME decision to purchase our MTX Audio 6.5″
weatherproof kick panel speakers for your Polaris ® RZR ® . With a few simple
tools from your trusty toolbox, these speakers are so easy to install that
even a 5-year old can do it. Trust us when we say we’ve tried it. The
rotationally molded enclosures are built as a single piece, designed to take
years of abuse without failure and the Quick Install Bracket with POD-LOC
technology makes mounting them a snap, literally. And of course, who can
forget the integrated RGB lighting in the speakers, because, who doesn’t like
things that light up, right? So, congratulations on your purchase, thanks for
your upport and most importantly, enjoy the ultimate audio experience with
MTX!
WE’RE HERE TO HELP
We’re here to help with any installation or technical support. Visit mtx.com
to chat, call 1-800-225-5689 to speak
with an MTX Technical Support representative, or visit
youtube.com/user/MTXAudioUSA to view product videos.
DON’T FORGET TO REGISTER YOUR PRODUCT
Don’t forget to register your new MTX Audio product. Visit
mtx.com/productregistration or scan the
QR code to the right.
Model #……………..
Serial #…………………………
Dealer’s Name…………………….
Date of Purchase………………
MAKE SURE TO READ THIS
If the RZR-14-FS kick panel speaker pods are being installed along with the RZR-14-SW subwoofer enclosure, the subwoofer MUST be installed first.
IMPORTANT NOTICE
Whenever working on the vehicle, it is recommended to disconnect the battery
prior to starting work.
Failure to do so may lead to a risk of electric shock or equipment damage.
When connecting power and ground wires ensure that the red power wire is fused
at the point where it is connected to the vehicle’s battery. Failure to do so
can result in damage to the vehicle if a short circuit develops between the
vehicle connection point and the product.
FEATURES
- Integrated RGB LED Lighting
- Custom Fit for RZR ® Kick Panel
- Custom Quick Mount Bracket with POD-LOC Technology for Easy Installation
- Rotationally Molded Sealed Enclosure
- Factory Matched Texture
- Polypropylene Woofer and Mylar Dome Tweeter
- Installer Friendly Design
- Direct Fit, No Cutting or Drilling Required
SPECIFICATIONS
- RMS Power Handling: 50-Watts
- Peak Power Handling: 100-Watts
- Sensitivity (2.83V/1m): 89.9dB
- Sensitivity (1W/1m): 85.6dB
- Frequency Response: 70Hz – 20kHz
- Impedance: 4Ω
FIT GUIDE
RZR 900 …………………………….2014 – 2020
RZR 900 XC ………………………………2015 – 2020
RZR 2 900 EPS ……………………………2014 – 2018
RZR 4 900 EPS …………………………………….2014 – 2020
RZR S 900 ………………………………2014 – 2020
RZR S 1000 ……………………………………2017 – 2020
RZR S4 1000 ……………………..2019 – 2020
RZR XP 1000 ………………………………..2014 – 2020
RZR XP Turbo ……………………..2016 – 2020
RZR XP Turbo S ……………………………………2019 – 2020
RZR XP Turbo Dynamix Edition …………………2018 – 2020
RZR XP 4 1000 …………………………………..2014 – 2020
RZR XP 4 Turbo …………………………………………2016 – 2020
RZR XP 4 Turbo S ………………..2019 – 2020
RZR XP 4 Turbo Dynamix Edition …………………….2018 – 2020
RZR XP 1000 Trails and Rocks ……………………..2019 – 2020
RZR XP 1000 High Lifter …………………………………2014 – 2020
RZR XP 4 1000 High Lifter …………………………..2014 – 2020
IN THE BOX
- RZR-14-FS Kick Panel Speaker Pods (Left and Right Enclosures)
- Mounting Hardware
(2) Mounting Brackets
(2) 10mm Screws
INSTALLATION
Step 1 – Remove the two (2) T40 screws at the bottom of the kick panel.
Step 2 – Remove the top 13mm body bolt.
Step 3 – Place the custom quick mount speaker bracket.
Step 4 – Reinstall the body bolt and two (2) T40 screws.
Step 5 – Align the bottom of the RZR-14-FS speaker pod with the hooks on the custom quick mount speaker bracket. Tilt the top of the speaker pod toward the outer body until flush against the mounting bracket. Push down until the pod locks in place. Step 6 – Align the top of the speaker pod with the speaker bracket and insert the supplied 10mm bolt.
Step 7 – Feed wire into dash towards amplifier mounting location.
Note: In the event these are not used with an MTX THUNDER SYSTEM, it will
be necessary to cut off the connectors and hardwire directly to your
equipment.
Step 8 – Reassemble and go ride.![MTX RZR14 FS POLARIS RZR Front Speaker Pods
- necessary](https://manuals.plus/wp-content/uploads/2022/12/MTX-RZR14-FS- POLARIS-RZR-Front-Speaker-Pods-necessary.png)
WARRANTY PERIOD
At MTX Audio we engineer products that will stand up to the test of time. We
also realize that from time to time a problem may occur. That’s why our
products carry a 2-year limited warranty that begins at the time of sale to
the end user.
Of course, we’re here to help. If you experience an issue with any of our
products within the warranty period, please contact our customer service
technical line at 1-800-CALL-MTX to help troubleshoot your issue. If, after
speaking with our technical experts it is determined that a problem lies with
the product, the technician will provide you with a Return Authorization
number and all relevant details you’ll need to get the product taken care of.
MITEK WARRANTY
Mitek Mobile products (including, but not limited to: MTX, Coustic,
Streetwires, Xtant, BassSlammer, and Thunder Marine) purchased in the USA from
an AUTHORIZED MITEK DEALER are guaranteed against defects in material and
workmanship for the period of time specified. The warranty period begins the
day the product is purchased by the end user, and this warranty is limited to
the original retail purchaser of product. Products found to be defective
during the warranty period will be repaired or replaced with equivalent
product by Mitek at no charge. This warranty is void if it is determined that
unauthorized parties have attempted repairs or alterations of any nature, and
the
warranty does not extend to cosmetics or finish. Mitek disclaims any liability
for other incurred or consequential damages resulting from product defects.
Mitek’s total liability will not exceed the purchase price of the product.
Let’s Get Social
mtx.com
Like, Follow, & Subscribe
© 2020 Mitek Corporation. All rights reserved. MTX is a trademark of Mitek
Corporation. All other trademarks
are property of their respective owners. Designed and Engineered in the U.S.A.
Due to continual product development, all specifications are subject to change
without notice.
MTX Audio, 4545 East Baseline Rd. Phoenix, AZ 85042 U.S.A.
1-800-225-5689
MTX006072 RevA 2/20 • 21A10764 • AW0015797
MTX.COM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>