MTX AUDIO X3-17-THUNDER3 3 Speaker System Instruction Manual
- June 3, 2024
- MTX Audio
Table of Contents
MTX AUDIO X3-17-THUNDER3 3 Speaker System
Thank You!
Congratulations and thank you for purchasing the MTX Audio X3-17-THUNDER3
audio system designed for the Can-Am™ Maverick X3. Our audio system will
deliver ground pounding audio making you the party vehicle in any ride!
With a few basic hand tools in your trusty toolbox, you can have this
installed in no time. So, what are you waiting for? It’s time to get the
rumble in your ride and go hit the trails! Oh, and congratulations on your
purchase, thanks for your support and most importantly, enjoy the ultimate
audio experience with MTX!
IN THE BOX
RECOMMENDED TOOLS
- T40 Torx with driver or drill
- Small flat blade or pin removal tool
- 19mm socket with extension and driver or drill
- 15mm socket with driver or drill
- 13mm socket with driver or drill
- 10mm socket with driver or drill
- 13mm wrench
- 10mm wrench
- 3mm Allen wrench
- RGB option – heat gun, butane torch, or lighter
- Extra zip ties
INSTALL VIDEO
Please visit http://mitk.co/NLF or scan the QR code to view our installation
video.
VEHICLE LAYOUT
WE’RE HERE TO HELP
We’re here to help with any installation or technical support. Visit
mtx.com to chat, call
1-800-225-5689 to speak with an MTX
Technical Support representative, or visit
youtube.com/user/MTXAudioUSA to view
product videos.
DON’T FORGET TO REGISTER YOUR PRODUCT
Don’t forget to register your new MTX Audio product. Visit
mtx.com/productregistration or scan the
QR code to the right.
Model #
Serial #
Dealer’s Name
Date of Purchase
MAKE SURE TO READ THIS
Installation of the X3-17-THUNDER3 audio system requires a lot of vehicle
disassembly. It is very important to return all hardware from which it came to
insure the safety and longevity of the vehicle and audio system.
IMPORTANT NOTICE
Whenever working on the vehicle, it is recommended to disconnect the battery
prior to starting work. Failure to do so may lead to a risk of electric shock
or equipment damage. When connecting power and ground wires ensure that the
red power wire is fused at the point where it is connected to the vehicle’s
battery. Failure to do so can result in damage to the vehicle if a short
circuit develops between the vehicle connection point and the product.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>