MTX AUDIO X3-17-THUNDER8 Audio System User Guide
- June 4, 2024
- MTX Audio
Table of Contents
MTX® Audio X3-17-THUNDER8 Audio System User Guide
Congratulations and thank you for purchasing the MTX Audio X3-17-THUNDER8 audio system designed for the Can-Am™ Maverick X3. Our audio system will deliver ground pounding audio making you the party vehicle in any ride!
With a few basic hand tools in your trusty toolbox, you can have this installed in no time. So, what are you waiting for? It’s time to get the rumble in your ride and go hit the trails! Oh, and congratulations on your purchase, thanks for your support and most importantly, enjoy the ultimate audio experience with MTX!
IN THE BOX
RECOMMENDED TOOLS
- T40 Torx with driver or drill
- Small flat blade or pin removal tool
- 19mm socket with extension and driver or drill
- 15mm socket with driver or drill
- 13mm socket with driver or drill
- 10mm socket with driver or drill
- 13mm wrench
- 10mm wrench
- 3mm Allen wrench
- RGB option – heat gun, butane torch, or lighter
- Extra zip ties
INSTALL VIDEO
Please visit http://mitk.co/NLI or scan the QR code to view our installation video.
VEHICLE LAYOUT
WE’RE HERE TO HELP
We’re here to help with any installation or technical support. Visit mtx.com to chat, call 1-800-225-5689 to speak with an MTX Technical Support representative, or visit youtube.com/user/MTXAudioUSA to view product videos.
DON’T FORGET TO REGISTER YOUR PRODUCT
Don’t forget to register your new MTX Audio product. Visit mtx.com/productregistration or scan the QR code to the right.
MAKE SURE TO READ THIS
Installation of the X3-17-THUNDER8 audio system requires a lot of vehicle disassembly. It is very important to return all hardware from which it came to insure the safety and longevity of the vehicle and audio system.
IMPORTANT NOTICE
Whenever working on the vehicle, it is recommended to disconnect the battery prior to starting work. Failure to do so may lead to a risk of electric shock or equipment damage. When connecting power and ground wires ensure that the red power wire is fused at the point where it is connected to the vehicle’s battery. Failure to do so can result in damage to the vehicle if a short circuit develops between the vehicle connection point and the product.
THANKS AGAIN!
Once you’re done putting your new MTX Audio X3-17-THUNDER8 audio system to the test, and making all your friends jealous, be sure to find us online and let us know what you think. Leave a product review on the website, and connect with us over social media.
Let’s Get Social
**mtx.com
** Like, Follow, & Subscribe
© 2021 MiTek Corporation. All rights reserved. MTX is a trademark of MiTek Corporation. All other trademarks are property of their respective owners. Designed and Engineered in the U.S.A. Due to continual product development, all specifications are subject to change without notice.
MTX Audio, 4545 East Baseline Rd. Phoenix, AZ 85042 U.S.A. 1-800-225-5689
MTX006500 RevA 4/21 • AW0015975 • 1-12421
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>