KING PL-D6-C12 Type IC 6 Inch Slim Round LED Panel Lights Owner’s Manual
- June 3, 2024
- KING
Table of Contents
KING PL-D6-C12 Type IC 6 Inch Slim Round LED Panel Lights
Type IC 6″ Slim Round LED Panel Lights
Part #: PL-D6-C12
FEATURES
Specifications
Specifications
Cut-Out Size| 6 inch
Wattage| 12 watts
Input Volatge| AC120V,60Hz
Beam Angle| 120°
Light Sourece| SMD LED
Color Temperature| RGB W2700K-6000K
CRI| 80Ra
Lumens Output| 900±5%
Lumen Efficiency| 75lm/w
Halogen Equiv.| 95 watts
Dimmable| 100%-5% (110V only)
Dimming Tech.| WIFI BLE
Cerification| cETLus,Energy Star
Power Factor| >0.9
Projected Life| 50,000hrs at 70% Light Output
Warranty| 3 years
Approved Location| Damp Locations
IC Rated| Yes
Air Tight| Yes
Housing
Durable die-casting aluminum lamp housing with excellent
heat dissipation,provide maximum airflow for the SMD LED light source.
LED Characteristics
This fixture contains SMD2835 LED module that offer high light color
uniformity, 12 watts up to 950 lumens;
Dimming
This panel light is dimmable from 100% down to 5% smoothly, It is a smart
speaker and mobile phone APP wireless dimming.
Mounting
Includes two spring loaded clips to attached to any ceiling material. Easy
recessed installation without needing a stand pot light can.
LED Driver
Iron metal driver box with junction box and a reliable isolated constant
current dimmable class II electronic LED driver inside.
Quick Connect push-in terminals
Three “Quick connect” push-in terminals for fast and easy wiring. Operating
Temperature: -20°C~40°C (-4°F~104°F)
Application
Dimensions & Installation
Ordering Guide
Luminous Intensity Distribution Curve
Illuminance at a Distance
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any inte rference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>