W-KING S2 TV Soundbar User Manual

User Manual
W-KING S2 TV Soundbar

S2 TV Soundbar

Sound Great!
Why not help other people hear something special?
Tell your friends and family
Share your experience by writing an online review

Not As Good As I Hoped…
We can put things right for you.
Our friendly customer support team are always here to help you: support.amazon@w-king.com

Important Safety Instructions

CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN

The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’ s enclosure that may be of sufficient magnitude as to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

• Please read and follow these instructions.
• Safety and operating instructions should be retained for future reference.
• Heed and observe all warnings.

Daily Care Guidelines

• Clean only with a dry cloth.
• Protect the power cord from being stepped on or pinched, especially at the plug.
• Unplug the device in thunderstorm, stormy weather or when it is not used for a long time.
• Refer repair work to qualified service personnel. Repairs are required when equipment is damaged in any way, such as a damaged power cord or plug, a liquid spill or object falling into the equipment, the equipment is exposed to rain or moisture, does not operate properly, or is dropped.

Package Contents

Product Diagram

1. Wall Mount
2. SUB OUT (For subwoofer connection only)
3. Optical Socket
4. Coax Socket
5. HDMIARC Socket
6. USB Socket
7. AUX Socket
8. DC Charging Socket
9. “ PLAY / PAUSE” Button
10. “Next / V+” Button
11. “ON/OFF” Button
12. “SOURCE” Button
13. “PRV/V-” Button

Remote Control

Basic Operation

and “Off”.
•Remote Control: Press  to power on / oft| Power on: LED turn on.
Power off: LED turn off.
Volume up| •Soundbar: Short press ” Next/V+ “to increase the volume level.
•Remote Control: Press ” VOL+ “.| At maximum volume: White light flashes.
Volume down| •Soundbar: Short press ” PRV/V-” to decrease the volume level.
•Remote Control: Press “VOL-“.| At maximum volume: White light flashes
Next Track (Only for Bluetooth mode and USB mode)| •Soundbar: Press and hold ” Next/V+ ” to change next track.
•Remote Control: Press ”  “.| /
Previous Track (Only for Bluetooth mode and USB mode)| •Soundbar: Press and hold ” PRV/V-” to change previous track.
•Remote Control: Press ” “.| /
Switch Mode (Bluetooth / HDMI / Optical / COAX /
USB / AUX)| •Soundbar: Press “SOURCE “.
•Remote Control: Press ” MODE “.| /
Sound Effects Movie/Music/News| •Remote Control: Press ” MOVIE MUSIC NEWS” .| /
Treble Enhance| Remote Control: Press ” TREB” button, then press ” VOL+/VOL-” to increase or decrease treble.| /
Bass Enhance| Remote Control: Press ” BASS ” button, then press ” VOL+/VOL-” to increase or decrease bass.| /
Repeat
(Only for USB mode)| •Remote Control: Press ” REPEAT” button| /
Mute/Unmute| •Remote Control: Press – MUTE’ button.| /

Placement and Mounting

Placement:

1. If the TV is on a table, you can place the soundbar on the table, directly in front of the TV cabinet, centered with the TV screen.
2. If the TV is attached to the wall, you can install the soundbar on the wall directly below the TV screen.

Wall Mounting
Note:
Installation must be carried out by qualified personnel only. Improper assembly can result in serious personal injury and property damage (if you plan to install the soundbar yourself, you must check for installations such as electrical wiring and plumbing that may be buried in the wall). It is the installer’s responsibility to verify that the wall can safely carry the total load of the soundbar and the wall bracket.

• Additional tools are required for installation (not included).
• Do not over-tighten screws.
• Keep this manual for future reference.
• Use an electronic stud finder to check wall type before drilling and installing.

Installation Notes:

• Do not place this apparatus near damp areas such as water and moisture.
• Do not block any ventilation openings. Follow the manufacturer’s instruc- tions for installation.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
• Only use attachments/accessories specified by the manufacturer.
• Do not place this unit close to string magnetic fields.
• Do not place this unit on the amplifier or receiver.

Connecting Electrical Power

• Installation of the power adapter and AC power cord.
• Using the power adapter and AC power cord, connect the soundbar to the power outlet shown in the figure.
• When you connect the power adapter for the first time, the soundbar will be in an automatic power-on state.

Risk of Product Damage!

• Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the soundbar.
• Before connecting the AC Power cord, ensure you have completed all other connections.
• Connect the mains cable to the AC Socket of the main unite and then into a mains socket.

Connect to HDMI ARC Socket

The soundbar supports HDMI with audio return channel (ARC). If your TV is HDMI ARC compliant, you can hear the TV audio through your Soundbar by using a single HDMI cable.

• Support HDMI TYPE-A Cable.
• Use a High Speed HDMI cable to connect the HDMI ARC connector on your Soundbar and the HDMIIN (ARC) connector on the TV (No HDMI OUT connec- tor).
• The HDMIARC connector on the TV might be labeled differently. For details, see the TV user manual.
• Press the “Source” button on soundbar or “Mode” button on the remote control to select the HDMI mode, the indicator light up yellow. (After 10 seconds, the indicator light will turn white)
• Some TVs need to select the Audio Source, enable the HDMI-CEC or set the Audio format first, otherwise there will be no sound. Below are some general setting, if it is different from your TV, please refer to your TV manual to enable HDMI operation.

Tips:

• Your TV must support the HDMI-CEC and ARC function. HDMI-CEC and ARC must be set to “on”.

• The setting method of HDMECEC and ARC may differ depending on the TV.
  For details about ARC function, please refer to your TV user manual.

• Make sure you are using an HDMI cable version 1.4 or higher.

• PC don’ t need to be set up.

Connect to OPTICAL Socket

• Connect the digital audio in (OPTICAL) Socket on the Soundbar to OPTICAL out jack of the TV with a digital optical cable.
• Press the “SOURCE” button on soundbar or “Mode” button on remote control to select the OPT mode, the indicator light up “ Cyan” (After 10 seconds, the indicator light will turn white)
• Set the TV’ s audio output to “ PCM”. (More information on PCM page)

Note: For the Optical, HDMI and the Coaxial connection, please activate External speakers and Digital PCM via the TV sound setting.

Connect to Coax Socket

• Connect the Coax in Socket on the Soundbar to Coax out Socket of the TV with a Coax cable.
• Press the “ SOURCE” button on soundbar or “ Mode” button on remote control to select the “ Coax” mode, the indicator light up “Red ” (After 10 seconds, the indicator light will turn white)
• Set the TV’ s audio output to “ PCM ”. (More information on PCM page)

Note: For the Optical , HDMI and the Coaxial connection, please activate External speakers and Digital PCM via the TV sound setting.

Connect to USB Socket

• Connect the USB Socket on the Soundbar with a USB drive.
• Press the “SOURCE” button on soundbar or “ Mode ”button on remote control to select the USB mode, the indicator light up “ Pink ” {After 10 seconds, the indicator light will turn white)
• Play music files from the USB Drive through the soundbar.

Connect to AUX Socket

A: Use a RCA to 3.5mm audio cable to connect the TV’ s audio output socket.
B: Use a 3.5mm to 3.5mm audio cable to connect the TV’ s or external audio device Aux socket to the Aux socket on the unit.

• Press the “SOURCE” button on soundbar or “ Mode ”button on remote control to select the “ AUX” mode, the indicator light up “Green” (After 10 seconds, the indicator light will turn white}

Connect to Bluetooth Device

A: When the soundbar first power on: After powering on, it will automatically enter Bluetooth pairing status and the indicator will flash blue light.
B:When the soundbar is in another connection: Please press “ SOURCE” button on the soundbar / “ Mode” button on remote control to select the “Bluetooth” mode, the indicator will flash blue light.

• Turn on Bluetooth on the Bluetooth device.
• Select “W-KING S2” from the list, Connect it. When the Bluetooth device is connected, the Soundbar indicator will stay on blue light. (No change to white light)

Note:

• Bluetooth Disconnection: Press and hold the “v+” and “ v-” buttons simultaneously.
• You cannot connect more than one Bluetooth device at a time.

Setting “PCM” on your TV

When all cables are connected properly, and LED indicator lights properly (Optical, COAX, HDMI connection), if there is no sound from TV or Soundbar, Please setting your TV as bellow:

• Press “Menu” on the TV’ s remote control.
• Press the arrow keys on the remote to scroll to “ Audio Settings.”
• Press “OK” on the remote control.
• Scroll to “Advanced Audio” and press “OK”, some TVs may not have an “Advanced Audio” menu and may list various audio settings instead.
• Scroll to “Audio Output Mode” or “ Digital Audio Output Mode” and press “OK.”
• Scroll unit “PCM ” is displayed as the current audio output.
• Press “OK” to save the settings.

FCC Rules

This equipment had been tested and found to comply with the limits for Class B digital devices, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio communication.
However, There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures:

SHENZHEN WEIKING TECHNOLOGY CO., LTD
CN, 518109, Guangdong, Shenzhen,
Longhua, Fucheng Street, Zhangge
Community, Zhangge Road, NO.142,
Building 1, Room 301
Tel: +86-755-36690577
Fax: +86-755-36815032
E-mail: support.amazon@w-king.com
www.w-king.com 
WsKING® is a registered trademark in the
US and European Union.
All rights reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>