FUFU GAGA 55 Inch Wide Dining & Kitchen Storage Instruction Manual
- June 9, 2024
- FUFU GAGA
Table of Contents
FUFU GAGA 55 Inch Wide Dining & Kitchen Storage
IMPORTANT INFORMATION!
please read the entire manual before starting to assemble and/or using this
product.follow the manual thoroughly and keep it for further reference.
AVOID SCRATCHES!
In order to avoid scratching this furnuture should be assembled on a soft
layer-could be a rug.
IMPROVE EFFICIENCY!
Try to find a partner to install with you, which can speed up the installation
efficiency and shorten the time.
ANTI-TOPPLE WARNING !
Overturned furniture can cause serious or fatal crush injuries. To prevent
tipping over, be sure to use the wall attachment, if not included with this
product. Please purchase the wall attachment that fit your wall. If unsure,
seek professional advice. Please read and follow each step of the instructions
carefully.
IMPORTANT !
It is important that any product which is assembled using any kind of screw is
re-tightened 2 weeks after assembly,and once every 3 months – in order to
assure stability through-out the lifespan of the product.
For regular maintenance and cleaning of the product, for the frame, please use
a rag dipped in neutral detergent to fully wipe it, and then dry it with a
clean rag.For glass materials, wipe with a rag dampened with water glass
cleaner, and then dry with a dry rag.
Do not use an electric screwdriver, and do not use too much force when
installing, because the board is easy to break.
Please prepare the following tools
When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size
Tools
PARTS
OVERVIEW
ASSEMBLY
-
Fix slide rail(B) and (C) to both sides of No.3 plate with screw(D) as shown.
Fix slide rail(B) and (C) to both sides of No.4 plate with screw(D) as shown.
Insert quickfit screw(A) into No.3 and No.4 plates as shown.
Please pay attention to the holes where the accessories are inserted and don’t use an electric screwdriver or use force to rotate, may cause crack.
-
Fix slide rail(B) and (C) to No.2 and No.5 plates respectively with screw(D) as shown.
Insert quickfit screw(A) into No.2, No.5 plates as shown.
Please pay attention to the holes where the accessories are inserted and don’t use an electric screwdriver or use force to rotate, may cause crack.
-
Hammer part(E) into the corresponding holes of No.8, No.7 and No.10 plates as shown.
-
Attach No.4 and No.3 plates to No.8 and No.9 plates with wooden dowel(F) and turn cam locks(G) clockwise to tighten as shown.
-
Connect No.2 and No.7 plates to No.3 with wooden dowel(F) and turn cam locks(G) clockwise to tighten as shown.
-
Connect No.5 and No.10 plates to No.4 with wooden dowel(F) and turn cam locks(G) clockwise to tighten as shown.
-
Insert quickfit screw(A) into No.1 plate as shown.
Please pay attention to the holes where the accessories are inserted.
-
Cover No.1 plate to the component with wooden dowel(F) and turn cam locks(G) clockwise to tighten as shown.
-
Slide No.15 and No.16 plates into available slots as shown.
Please note two No.16 plates are connected with No.17 bar.
-
Cover No.6 plate to the component with wooden dowel(F) at first, then use screw(H) to fix as shown.
-
Rotate part(J) into the support leg 14 as shown.
-
Rotate leg 13 and support leg 14 into No.6 plate as shown.
-
Insert part(K) into No.2, 3, 4 and 5 plates, put shelf No.11 as shown.
-
Fix hinge(L) to No.12 plate with Insert part(K) into No.2, 3, 4 and 5 plates, put shelf No.11 as shown. screw(M), fix handle(N) with screw(P) as shown.
-
Attach No.12 plate to the unit by fixing hinge with screw(M) as shown.
-
Lock Setting
-
Insert quickfit screw(A) into No.18 and No.19 plates as shown.
-
Attach No.20 , 21 and 26 to No.19 plate, turn cam locks(G) clockwise to tighten as shown.
-
Slide No.24/25 into available slots as shown.
-
Attach No.22/23 to the component with screw(Q) as shown.
Fix knob(N) to No.18 and No.19 plate with screw(P) as shown.
-
respectively with Fix runner(R) and (S) to No.20 and No.21 screw(D) as shown.
-
Align rails, put all drawers.
-
Tuck part(T) into the gap of the back panel using screw(U) as shown.
-
If you want more stability, please install anti-dumping device.
WARRANTY
WARRANTY CLAIMS
- There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase.
- Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange with in 48 hours. If there is out of stock, we will reply with a shipping date.
- The product must be used in accordance with the instructions provided. For health reasons.
- For other reasons, if the furniture needs to be returned, it must be cleaned and dried and operated within 30 days of receipt.
Type of Warranty Claim
- Failure to follow the furniture instructions will invalidate the warranty. Attention please.
- Does not include damage during installation, but includes damage during transportation.
Scope of responsibility
- Shall not bear any responsibility for misuse or user damage and/or loss of parts during the installation of furniture.
- After using, the damage and scratches of the furniture are not covered by the warranty.
The Warranty Relates to All Bought in The Us and Covers The Following Areas
- Sheet parts: 1 month from the date of purchase.
- Electrical parts: 1 month from the date of purchase.
RETURNS
CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM?
PLEASE FOLLOW THE BELOW INSTRUCTIONS:
- If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns.
DEFECTIVE ITEMS
- If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us.
DAMAGED ITEMS
- If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused. If the delivery has been accepted and then shipping damage is found, please follow the specific instructions advised by the retailer.
In all circumstances please save all packaging material and paperwork for the order.
Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfiller, you jeopardize your chances of making a claim, and you may not receive a credit for the return.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>