OSD AUDIO NERO Mini HT Satellite Speaker User Guide
- June 3, 2024
- OSD AUDIO
Table of Contents
OSD AUDIO NERO Mini HT Satellite Speaker
Safety Instructions
- Choose a secure mounting location. Ensure the mounting surface is sound where the speaker can firmly attach. If the mounting surface is not sound or if the speaker is not mounted properly damage and or personal injury may occur.
- Do not use nails, adhesives or other non authorized methods of mounting. Long term use and vibration may cause failure and damage.
- Take care not to not to damage the cone surface of the speaker as this will cause loss in performance and sound quality.
- Installation or service should always be performed with the power amplifiers power OFF.
- Always reduce volume levels when switching sources (ex. Tuner/ DVD/ CD) to avoid damage to the speakers.
Packing List
-
1 NERO Mini
-
1 Ball Joint Bracket
-
1 Phoenix Connector
-
Screw x4
-
Screw x4
-
User’s Guide
Installation
-
Affix the bracket to the wall/mounting surface.
-
Connect the speaker wire to the Phoenix Connector.
-
Attach the Phoenix Connector to the Speaker
-
Attach the speaker to the bracket
Listening
- Most speaker damage is caused by amplifiers with too little power (wattage)
- An overdriven amplifier clips the waveforms and leads to speaker distortion.
- Clipping is usually audible and it may vary from a harsh sound tp a fuzzy or unclear sound.
- If you hear clipping at high volume levels, adjust the amplifiers gain and or volume levels down until the clipping stops.
- Damage caused by operating the speakers at distorted volume levels is not covered by the warranty.
SPECIFICATIONS
- Home Theater Satellite Speaker
- Woofer: 3″ Paper Cone
- Power Handling: 25W Max.
- Freq Response: 1 00Hz-20kHz
- Sensitivity: 85±3dB
- Impedance: 8 Ohm
- Mounting: Bracket/Screw
- Cabinet Material: ABS
- Color: Black/White
- Dimensions: H 3.7″ x W 3.26″ x D 4.64″
- Warranty 10 Year
WARRANTY
All OSD AUDIO electronics have (10) year Limited Warranty against defects in
materials and workmanship. Proof of purchase must accompany all claims. During
the warranty period OSD AUDIO will replace any defective part and correct any
defect in workmanship without charge for either parts or labor.
OSD AUDIO may replace returned electronics with a product of equal value and
performance. In such cases, some modifications to the mounting may be
necessary and are not OSD AUDIO’s responsibility.
For this warranty to apply, the unit must be installed and used according to
its written instructions. If necessary, repairs
must be performed by OSD AUDIO. The unit must be returned to OSD AUDIO at the
owner’s expense and with prior written permission. Accidental damage and
shipping damage are not considered defects, nor is damaged resulting from
abuse or from servicing performed by an agency or person not specifically
authorized in writing by OSD Audio
OSD AUDIO sells products only through authorized dealers and distributors to
ensure that customers obtain proper
support and service. Any OSD AUDIO product purchased from an unauthorized
dealer or other source, including retailers, mail order dealers and online
sellers will not be honored or serviced under existing OSD AUDIO warranty
policy. Any sale of product by an unauthorized source or other manner not
authorized by OSD AUDIO shall void the warranty on the applicable product.
Damage to or destruction of components due to application of excessive power
voids the warranty on those parts. In these
cases, repairs will be made on the basis of the retail value of the parts and
labor. To return for repairs, you must email customer service at
RMA@audiogeargroup.com for a Returned
Merchandise Authorization (RMA) number then the unit must be shipped to OSD
AUDIO at the owner’s expense, along with a note explaining the nature of
service required. Be sure to pack the product(s) in a corrugated container
with at least 3 inches of resilient material to protect the unit from damage
in transit.
This Warranty Does Not Cover: Damage caused by abuse, accident, misuse,
negligence, or improper operation 0
(installation)
- Any products that have been altered or modified
- Any product whose identifying number of decal, serial#, etc. has been altered, defaced or removed
- Normal wear and maintenance.
The NERO Mini HT Satellite Speaker is an excellent way to enhance the sound of 2.1, 5.1 or higher home theater or to build a mini home theater or gaming system. Sold as a single speaker, customers can chose an odd or even amount depending on their requirements and room configuration or purchase numerous NERO Mini HT Mini speakers to create a Dolby Atoms surround sound system.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>