INTELLINET 561747 IES-05GP 5-Port Gigabit Ethernet Switch Instructions
- June 3, 2024
- INTELLINET
Table of Contents
INTELLINET 561747 IES-05GP 5-Port Gigabit Ethernet Switch
Instruction
Important: Read before use.
Power
Use the included power adapter to connect the DC/5V jack (A) to an AC outlet.
Confirm that the Power LED (B) lights. NOTE: To ensure proper operation, use
only the included power adapter.
Ports
All ports on the switch support Auto-MDI/MDI-X functionality, so crossover
cables and uplink ports are not needed for connections to PCs, routers, other
switches, etc. Cat5/5e/6/6a UTP/STP cables provide optimal performance; if a
status LED (C) doesn’t indicate a link or activity, check the corresponding
device
for proper setup and operation.
Place m ent
Prior to use, it is recommended that the switch be placed/positioned:
- with a minimum of 25 mm (approx. 1”) of clearance on the top and sides for adequate ventilation;
- away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
- within 100 m (approx. 328’) of network devices it’s to be connected to.
REGULATORY STATEMENTS
FCC Class B
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of Federal Communications Commission
(FCC) Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures: reorient or relocate
the receiving antenna; increase the separation between the equipment and the
receiver; connect the equipment to an outlet on a circuit different from the
receiver; or consult the dealer or an experienced radio/TV technician for
help. Caution! Any changes or modifications to the product not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
CE
This device complies with the requirements of CE 2014/30/EU and/or 2014/35/EU.
The Declaration of Conformity for is available at: support.intellinet-
network.com/barcode/561747
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>