Knightsbridge 2GPHxx 2G Fold Away Phone Holder Instruction Manual
- June 2, 2024
- Knightsbridge
Table of Contents
INSTALLATION & MAINTENANCE MANUAL
2GPHxx
11
GENERAL INSTRUCTIONS
These instructions should be read carefully and retained after installation
by the end user for future reference and maintenance.
These instructions should be used to aid installation of the following
product: 2GPHxx
SAFETY
- This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations. If in any doubt, consult a qualified electrician
- Please isolate mains prior to installation
- This product is IP20 rated
INSTALLATION
Fig. 1
- Please ensure power to the socket outlet is disconnected
- Loosen the fixing screws of the socket outlet to which the phone holder is to be fitted, until there is approximately a 4mm gap. There is no need to completely remove the socket outlet from the wall, nor to disconnect the wiring. If the socket outlet is screwless, remove the front plate first as per the manufacturer’s instructions
- Insert the upper and lower parts of the phone holder between the wall and the socket outlet, being careful to line them up correctly, and click the two parts together (see Fig. 1)
Fig. 2
- Adjust the phone holder to the correct position, and tighten the fixing screws (see Fig. 2)
Fig. 3
- Switch on power to the socket outlet
- Open the phone holder by pulling from both sides (see Fig. 3), and close when not in use
GENERAL
This product should be recycled in the correct manner when it reaches the end
of its life. Check local authorities for where facilities exist
Clean with a soft dry cloth only, do not use aggressive cleaning products or
solvents which may damage the product
WARRANTY
This product has a warranty of 1 year from date of purchase. Failure to install this product in accordance with the current edition of the IEE Wiring Regulations (BS7671), improper use, or removal of the batch code will invalidate the warranty. If this product should fail within its warranty period it should be returned to the place of purchase for a free of charge replacement. ML Accessories does not accept responsibility for any installation costs associated with the replacement product. Your statutory rights are not affected. ML Accessories reserve the right to alter product specification without prior notice.
DCJUN19_V1
Documents / Resources
|
Knightsbridge 2GPHxx 2G Fold Away Phone
Holder
[pdf] Instruction Manual
2GPHxx, 2G Fold Away Phone Holder, 2GPHxx 2G Fold Away Phone Holder, Phone
Holder, Holder
---|---