TCL Sweeva 6000/6500 Robot Vacuum User Guide
- June 3, 2024
- TCL
Table of Contents
Sweeva 6000/6500 Robot Vacuum
User Guide
Please read this quick start guide before using this product and keep it for later use
Remove the protective material
- Before use, remove the protective strip.
- Install the side brush, and tear off the protective film.
Place the charging dock/self-emptying dustbin
- Ensure that there are no obstacles within 1.5m in front and 0.5m on the left and right.
- For Sweeva 6000, the bottom of its front faces the charging dock; for Sweeva 6500, its rear end faces the dust collecting tower.
For
more information and user manual, please visit:
www.tcl.com
Use of the machine
- Press and hold the “ ” button for 3s to turn on the machine.
- Please fully charge the battery for the first use. The charging time is 4 hours.
Light Status
- Solid blue light: standby/running (normal battery level).
- Solid orange light: standby (low battery).
- Blue light breathing: return for charging.
- Orange light breathing: charging/startup at low battery.
- Blue light flashing: connect to Wi-Fi.
- Red light flashing: error or fault mode.
Download the APP
- Search for “TCL HOME” in the mobile application store.
- Or scan the QR code below to download the APP.
07107237
https://www.tcl.com/content/TCLHome/v3/ScanCodeJump.html?source=f&sence=01&pdcode=a&mode=6000
Connect to the APP
-
Press “Add devices”.
-
Choose “Sweeva 6000/6500”.
-
Press and hold the “ ”and “ ”buttons simultaneously for 3s, then the machine enters the network configuration, and the indicator light flashes in blue.
-
Note: Currently, the machine does not support 5G Hz Wi-Fi.
Start cleaning
- When the machine is powered on with normal battery level, press the “ ”button to start cleaning.
- Or, after the network configuration is successful, click “Clean” button on the APP interface to start cleaning.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>