TCL HH515V 5G Home Station Router User Guide
- October 30, 2023
- TCL
Table of Contents
TCL HH515V 5G Home Station Router
Product Information
The TCL CJB1YM001AAB is a wireless router that supports both 4G and 5G networks. It has indicators for power, Wi-Fi/WPS, 4G and 5G networks. The router comes with WAN/LAN ports, LAN ports, a telephone port, a power connector, a micro USB port, a nano SIM card slot, and a reset button. It also has a WPS button that can be used to enable the WPS function.
Product Usage Instructions
To use the TCL CJB1YM001AAB wireless router, follow these instructions:
- Connect the power adapter to the power connector and plug it into an electrical outlet.
- Insert a nano SIM card into the nano SIM card slot located at the bottom of the device. Do not remove the SIM card when the router is in use.
- Press the power button to turn on the device. The power indicator will light up.
- Connect your computer or other wired devices to the WAN/LAN port or LAN ports using an Ethernet cable.
- Use the telephone port to connect a telephone to make or answer calls.
- To enable the WPS function, press the WPS button for 3 seconds. The WPS function will be automatically disabled if a WPS connection is not established within 2 minutes.
- If you need to reset the device, use a paperclip to press and hold the reset button for 3 seconds.
Note: The micro USB port is intended for debug use only and should not be used for normal operation.
OVERVIEW
1. 5G network indicator| • Solid blue: the signal is strong.
• Solid yellow: the signal is good.
• Solid red: the signal is weak.
• Off: the 5G network is not working.
---|---
2. 4G network indicator| • Solid blue: the signal is strong.
• Solid yellow: the signal is good.
• Solid red: the signal is weak.
• Off: the 4G network is not working.
3. Wi-Fi/WPS indicator| • Blinking blue: WPS connection is available.
• Solid blue: Wi-Fi is enabled.
• Off: Wi-Fi is disabled.
4. Power indicator| • Solid blue: the device is on.
• Blinking blue: the device is performing factory reset or firmware update.
• Off: the device is off.
---|---
5. Power button| • Press for 3 seconds to power off your device.
• Press for 1 second to power on your device.
6. WPS button| Press the button for 3 seconds to enable the WPS function. The
WPS function will be automatically disabled if a WPS connection is not
established within 2 minutes.
7. WAN/LAN port| Used to connect to an internet source or wired devices such
as computers or switches.
8. LAN port| Used to connect to wired devices such as computers or switches.
9. Telephone port| Connect a telephone to make or answer calls.
10. Power connector| Used to connect to the power adapter.
| 1. Micro USB port | It is intended for debug use only. |
|---|---|
| 2. Nano SIM card slot | Insert a nano SIM card in the slot. |
| 3. Reset button | Use a paperclip to press the button for 3 seconds to reset |
the device.
INSERT SIM CARD
NOTE : Do not remove the SIM card when your CPE is in use.
CONNECTIVITY
- To establish a wired network connection, connect the wired device to the LAN port of your CPE using an Ethernet cable.
- To establish a wireless network connection, search for the Wi-Fi name on your wireless devices. The default Wi-Fi name (or the SSID) and password can be found on the bottom label of your CPE.
- To configure the CPE Wi-Fi network, open a web browser on the device connected to the CPE network wiredly or wirelessly, then go to http://192.168.1.1 and follow the on-screen instructions.
NOTE: For the default login information, refer to the bottom label of your CPE.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>