TCL HH63AF Router User Guide
- October 30, 2023
- TCL
Table of Contents
Quick Start Guide
CJB73T0LCAGB
HH63AF
HH63AF Router
1. Power indicator| • On: The device is powered on.
• Off: The device is powered off.
---|---
2. Network indicator| • Blinking green: The device is registered to 3G
network.
• Blinking blue: The device is registered to 4G network.
• Solid green: The device is connected to 3G network.
• Solid blue: The device is connected to 4G network.
• Solid red: Nano SIM card is not available or the device is not registered to
the network.
3. Wi-Fi/WPS indicator| • Blinking blue: WPS connection is available.
• Solid blue: Wi-Fi is enabled.
• Off: Wi-Fi is disabled.
4. LAN/WAN indicator| • On: the WAN or LAN port is connected.
• Off: the WAN or LAN port is not connected.
5. Signal indicator| • 1 bar: weak signal strength.
• 2 bars: good signal strength.
• 3 bars: excellent signal strength.
• Off: no signal.
6. Reset button| Use a paperclip to press the button for 3 seconds to reset
the device.
7. Nano SIM card slot| Insert a Nano SIM card in the slot.
8. WPS button| Press the button for 3 seconds to enable the WPS function. The
WPS function will be automatically disabled if a WPS connection is not
established within 2 minutes.
9. Power button| • Press for 3 seconds to power off your device.
• Press for 1 second to power on your device.
10. Telephone port
(Optional)| Connect to a telephone to make or answer calls.
11. LAN/WAN port| Used to connect to an internet source or wired devices such
as computers or switches.
12. LAN port| Used to connect to wired devices such as computers or switches.
13. Power connector| Used to connect to the power adapter.
Do not remove the Nano SIM card when your CPE is in use.
The TEL port/telephone function is optional depending on the device you purchase.
- To establish a wired network connection, connect the wired device to the LAN port of your CPE using an Ethernet cable.
- To establish a wireless network connection, search for the Wi-Fi name on your wireless devices. The Wi-Fi name (or the SSID) and the Wi-Fi key can be found on the bottom label of your CPE.
- To configure the CPE Wi-Fi network, open a web browser on the device connected to the CPE network wiredly or wirelessly, then go to the login website which is printed on the bottom label of your CPE and follow the on-screen instructions.
Note: For the default login information, refer to the bottom label of your CPE.
For a full user manual, check the Help section on the login website.
General Information
- Manufacturer: TCL Communication Ltd.
- Address: 5/F, Building 22E, 22 Science Park East Avenue, Hong Kong Science Park, Shatin, NT, Hong Kong
- Visit the TCL website at https://www.tcl.com/mx for tutorials and answers to frequently asked questions, and to download the User Manual.
• To get support for your device, visit the TCL website (https://www.tcl.com/mx/es/service-support-mobile.html), or dial the number listed below:
Argentina: 0810-999-1099
Chile: +56 22 958 96 94
Colombia: 18009520823
Ecuador: 800000635
Mexico: 8008909908
Peru: 080000698
The Dominican Republic: 8887600164
Uruguay: 405296624
Venezuela: 08001005368
Important Safety Information
Read all the safety information before using your device. Failure to follow these safety instructions could result in injury, or damage to your device or other property. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use or use contrary to the instructions contained herein.
Safety and use
- Do not use the device in areas where wireless devices are prohibited.
- When the device is switched on, it should be kept at least 15 cm from any medical device such as a pacemaker, a hearing aid, or an insulin pump. Consult your physician and medical device manufacturer for information specific to your medical device.
- Do not let children use the device and its accessories without supervision.
- Always handle your device with care, and keep it in a clean and dust-free place.
- Do not attempt to repair the device yourself.
- Do not drop, throw, or bend your device.
- Do not dispose of the device and its accessories in a fire.
Power adapter
Only charge with an adapter that is compliant with the applicable
international and regional safety standards. The adapter shall be CE-approved.
Using other adapters could cause damage to the device or pose a risk of injury
or death. Keep the adapter in a well-ventilated area when it is plugged into
an electrical outlet. Don’t use damaged power adapters.
| Input voltage/AC frequency | 100~240 V, 50/60 Hz |
|---|---|
| Output voltage/current/power | 12.0V / 1.0A / 12.0W |
Operating environment
Your device is designed to work best in ambient temperatures between 0 °C and 45 °C (32 °F and 113 °F), and should be stored in ambient temperatures between –10 °C and 70 °C (14 °F and 158 °F). Your device may malfunction if operated or stored outside of these temperature ranges. Avoid exposing the device to dramatic changes in temperature or humidity.
Radio waves
THIS DEVICE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES
FCC ID: 2ACCJB195
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna;
- Increase the separation between the equipment and receiver;
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;
- Consult the dealer or an experienced radio/ TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
For the receiver devices associated with the operation of a licensed radio
service (e.g. FM broadcast), they bear the following statement:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference;
- This device must accept any interference received, including interference that may cause undesired operation.
Your device is a transceiver that operates on UMTS/HSPA/HSPA+/DC HSPA+ in quad- band (B1/2/4/5) or LTE (B2/4/5/7/28/66).
Licenses
Privacy statement of device usage
Any personal data you shared with TCL Communication Ltd. will be handled in
accordance with our Privacy Notice. You can check our Privacy Notice by
visiting our website: https://www.tcl.com/global/en/communication-privacy-
policy
Disclaimer
There may be certain differences between the user manual description and the
device’s operation, depending on the software release of your device or
specific operator services. TCL Communication Ltd. shall not be held legally
responsible for such differences, if any, nor for their potential
consequences, which responsibility shall be borne by the operator exclusively.
Repair or replacement may be carried out using reconditioned components
offering equivalent functionality.
This warranty covers the costs of repair or replacement (labour and spare
parts) but excludes any other costs.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>